Biowaiver monographs for immediate-release solid oral dosage forms: Stavudine

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate-release (IR) solid oral dosage forms containing stavudine (d4T) are reviewed. According to Biopharmaceutics Classification System (BCS), d4T can be assigned to BCS class I. No problems with BE of IR d4T formulations containing different excipients and produced by different manufacturing methods have been reported and, hence, the risk of bioinequivalence caused by these factors appears to be low. Furthermore, d4T has a wide therapeutic index. It is concluded that a biowaiver is appropriate for IR solid oral dosage forms containing d4T as the single active pharmaceutical ingredient (API) provided that (a) the test product contains only excipients present in the IR d4T drug products that have been approved in a number of countries for the same dosage form, and (b) both test product and its comparator are either very rapidly dissolving or rapidly dissolving with similarity of dissolution profiles demonstrated at pH 1.2, 4.5, and 6.8. (c) 2011 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 101:1016, 2012

Lithium in M 67: From the main sequence to the red giant branch

Context. Lithium abundances in open clusters are a very effective probe of mixing processes, and their study can help us to understand the large depletion of lithium that occurs in the Sun. Owing to its age and metallicity, the open cluster M 67 is especially interesting on this respect. Many studies of lithium abundances in M 67 have been performed, but a homogeneous global analysis of lithium in stars from subsolar masses and extending to the most massive members, has yet to be accomplished for a large sample based on high-quality spectra. Aims. We test our non-standard models, which were calibrated using the Sun with observational data. Methods. We collect literature data to analyze, for the first time in a homogeneous way, the non-local thermal equilibrium lithium abundances of all observed single stars in M 67 more massive than similar to 0.9 M-circle dot. Our grid of evolutionary models is computed assuming a non-standard mixing at metallicity [Fe/H] = 0.01, using the Toulouse-Geneva evolution code. Our analysis starts from the entrance into the zero-age main-sequence. Results. Lithium in M 67 is a tight function of mass for stars more massive than the Sun, apart from a few outliers. A plateau in lithium abundances is observed for turn-off stars. Both less massive (M >= 1.10 M-circle dot) and more massive (M >= 1.28 M-circle dot) stars are more depleted than those in the plateau. There is a significant scatter in lithium abundances for any given mass M <= 1.1 M-circle dot. Conclusions. Our models qualitatively reproduce most of the features described above, although the predicted depletion of lithium is 0.45 dex smaller than observed for masses in the plateau region, i.e. between 1.1 and 1.28 solar masses. More work is clearly needed to accurately reproduce the observations. Despite hints that chromospheric activity and rotation play a role in lithium depletion, no firm conclusion can be drawn with the presently available data.

Life-cycle and host preference of Amblyomma ovale (Acari: Ixodidae) under laboratory conditions

This study evaluated for the first time the life cycle of Amblyomma ovale in the laboratory. For this purpose, larvae and nymphs were exposed to Gallus gallus (chickens), Cavia porcellus (guinea pigs), Rattus norvegicus (wistar rats), Oryctolagus cuniculus (domestic rabbits), Calomys callosus (vesper mouse), and Didelphis albiventris (white-eared opossum). Nymphs were also exposed to Nectomys squamipes (South American water rat). Adult ticks were fed on dogs. The life-cycle of A. ovale in laboratory could be completed in an average period of ca. 190 days, considering prefeeding periods of 30 days for each of the parasitic stages. Vesper mice were the most suitable host for A. ovale larvae, whereas water rats were the most suitable host for A. ovale nymphs. Our results, coupled with literature data, strongly indicate that small rodents have an important role in the life history of A. ovale. Chickens (the only avian host used in the present study) showed to be moderately suitable hosts for subadult A. ovale ticks, indicating that wild birds might have a secondary role in the life history of A. ovale. Domestic dogs showed to be highly suitable for the adult stage of A. ovale, in agreement with literature data that indicate that the domestic dog is currently one of the most important hosts of A. ovale adult ticks in Latin America.

Processes Mapping in Cotton Culture to Traceability Creation

Traceability is a concept that arose from the need for monitoring of production processes, this concept is usually used in sectors related to food production or activities involving some kind of direct risk to people. Agribusiness in the cotton industry does not have a comprehensive infrastructure for all stages of the processes involved in production. Map and define the data to enable traceability of products is synonymous to delegate responsibilities for all involved in the production, the collection of aggregate data on cotton production is done in stages and specific pre-defined since the choice of the variety through the processing, the scope of this article specifically addresses the production of lint cotton. The paper presents a proposal based on service oriented architecture (SOA) for data integration processes in the cotton industry, this proposal provide support for the implementation of platform independent solutions.

Recoupled separated-local-field experiments and applications to study intermediate-regime molecular motions

A specific separated-local-field NMR experiment, dubbed Dipolar-Chemical-Shift Correlation (DIPSHIFT) is frequently used to study molecular motions by probing reorientations through the changes in XH dipolar coupling and T-2. In systems where the coupling is weak or the reorientation angle is small, a recoupled variant of the DIPSHIFT experiment is applied, where the effective dipolar coupling is amplified by a REDOR-like pi-pulse train. However, a previously described constant-time variant of this experiment is not sensitive to the motion-induced T-2 effect, which precludes the observation of motions over a large range of rates ranging from hundreds of Hz to around a MHz. We present a DIPSHIFT implementation which amplifies the dipolar couplings and is still sensitive to T-2 effects. Spin dynamics simulations, analytical calculations and experiments demonstrate the sensitivity of the technique to molecular motions, and suggest the best experimental conditions to avoid imperfections. Furthermore, an in-depth theoretical analysis of the interplay of REDOR-like recoupling and proton decoupling based on Average-Hamiltonian Theory was performed, which allowed explaining the origin of many artifacts found in literature data. (C) 2012 Elsevier Inc. All rights reserved.

A UML profile for the OBO relation ontology

Background: Ontologies have increasingly been used in the biomedical domain, which has prompted the emergence of different initiatives to facilitate their development and integration. The Open Biological and Biomedical Ontologies (OBO) Foundry consortium provides a repository of life-science ontologies, which are developed according to a set of shared principles. This consortium has developed an ontology called OBO Relation Ontology aiming at standardizing the different types of biological entity classes and associated relationships. Since ontologies are primarily intended to be used by humans, the use of graphical notations for ontology development facilitates the capture, comprehension and communication of knowledge between its users. However, OBO Foundry ontologies are captured and represented basically using text-based notations. The Unified Modeling Language (UML) provides a standard and widely-used graphical notation for modeling computer systems. UML provides a well-defined set of modeling elements, which can be extended using a built-in extension mechanism named Profile. Thus, this work aims at developing a UML profile for the OBO Relation Ontology to provide a domain-specific set of modeling elements that can be used to create standard UML-based ontologies in the biomedical domain. Results: We have studied the OBO Relation Ontology, the UML metamodel and the UML profiling mechanism. Based on these studies, we have proposed an extension to the UML metamodel in conformance with the OBO Relation Ontology and we have defined a profile that implements the extended metamodel. Finally, we have applied the proposed UML profile in the development of a number of fragments from different ontologies. Particularly, we have considered the Gene Ontology (GO), the PRotein Ontology (PRO) and the Xenopus Anatomy and Development Ontology (XAO). Conclusions: The use of an established and well-known graphical language in the development of biomedical ontologies provides a more intuitive form of capturing and representing knowledge than using only text-based notations. The use of the profile requires the domain expert to reason about the underlying semantics of the concepts and relationships being modeled, which helps preventing the introduction of inconsistencies in an ontology under development and facilitates the identification and correction of errors in an already defined ontology.

Genotoxicity assessment of water soluble fractions of biodiesel and its diesel blends using the Salmonella assay and the in vitro MicroFlow (R) kit (Litron) assay

The designation of biodiesel as an environmental-friendly alternative to diesel oil has improved its commercialization and use. However, most biodiesel environmental safety studies refer to air pollution and so far there have been very few literature data about its impacts upon other biotic systems, e.g. water, and exposed organisms. Spill simulations in water were carried out with neat diesel and biodiesel and their blends aiming at assessing their genotoxic potentials should there be contaminations of water systems. The water soluble fractions (WSF) from the spill simulations were submitted to solid phase extraction with C-18 cartridge and the extracts obtained were evaluated carrying out genotoxic and mutagenic bioassays [the Salmonella assay and the in vitro MicroFlow (R) kit (Litron) assay]. Mutagenic and genotoxic effects were observed, respectively, in the Salmonella/microsome preincubation assay and the in vitro MN test carried out with the biodiesel WSF. This interesting result may be related to the presence of pollutants in biodiesel derived from the raw material source used in its production chain. The data showed that care while using biodiesel should be taken to avoid harmful effects on living organisms in cases of water pollution. (C) 2011 Elsevier Ltd. All rights reserved.

Global gene expression profiling of oral cavity cancers suggests molecular heterogeneity within anatomic subsites

Abstract Background Oral squamous cell carcinoma (OSCC) is a frequent neoplasm, which is usually aggressive and has unpredictable biological behavior and unfavorable prognosis. The comprehension of the molecular basis of this variability should lead to the development of targeted therapies as well as to improvements in specificity and sensitivity of diagnosis. Results Samples of primary OSCCs and their corresponding surgical margins were obtained from male patients during surgery and their gene expression profiles were screened using whole-genome microarray technology. Hierarchical clustering and Principal Components Analysis were used for data visualization and One-way Analysis of Variance was used to identify differentially expressed genes. Samples clustered mostly according to disease subsite, suggesting molecular heterogeneity within tumor stages. In order to corroborate our results, two publicly available datasets of microarray experiments were assessed. We found significant molecular differences between OSCC anatomic subsites concerning groups of genes presently or potentially important for drug development, including mRNA processing, cytoskeleton organization and biogenesis, metabolic process, cell cycle and apoptosis. Conclusion Our results corroborate literature data on molecular heterogeneity of OSCCs. Differences between disease subsites and among samples belonging to the same TNM class highlight the importance of gene expression-based classification and challenge the development of targeted therapies.

Chemical constituents from three medicinal plants: Piper renitens, Siparuna guianensis and Alternanthera brasiliana

Chemical study of three medicinal plants: from leaves of Piper renitens (Miq.) Yunck, Piperaceae, and Siparuna guianensis Aubl., Siparunaceae, and from flowers of Alternanthera brasiliana (L.) Kuntze, Amaranthaceae, resulted in isolation of nine compounds: three steroids, β-sitosterol, stigmasterol from P. renitens and sitosterol-3-O-β-D-glucopyranoside from A. brasiliana, the diterpene kaurane ent-kauran-16α,17-diol from P. renitens, two derivatives kaempferol-methylether, kumatakenine (kaempferol-3,7-dimethylether) and kaempferol-3,7,3'-trimethylether from S. guianensis and three flavones, crysoeriol (5,7,4'-trihydroxy-3'-methoxyflavone), tricin (5,7,4'-trihydroxy-3',5'-dimethoxyflavone) and 7-O-β-D-glucopyranoside-5,4'-dihydroxy-3'-methoxyflavone from A. brasiliana. Compounds structures were determinate using 1D and 2D ¹H NMR and 13C spectral data, mass and IR spectra, comparing with literature data.

Meroterpenes from Peperomia oreophila Hensch. and Peperomia arifolia Miq.

One new meroterpene, 4-[(2'E)-3',7'-dimethylocta-2',6'-dien-1'-yl]-5-methyl-2-(3"‑methylbut-2"-enyl)-benzene-1,3-diol, together with eight known compounds, was isolated from the MeOH extract from the leaves of Peperomia oreophila Hesch. The prenylated phenol was also isolated as main compound from the CH2Cl2:MeOH extract from leaves of Peperomia arifolia Miq. The structures of the substances were established on the basis of the spectral evidences and supported by literature data.

Groups of services delivered by Brazilian branchless banking and respective network integration models

Over the last decade, Brazil has pioneered an innovative model of branchless banking, known as correspondent banking, involving distribution partnership between banks, several kinds of retailers and a variety of other participants, which have allowed an unprecedented growth in bank outreach and became a reference worldwide. However, despite the extensive number of studies recently developed focusing on Brazilian branchless banking, there exists a clear research gap in the literature. It is still necessary to identify the different business configurations involving network integration through which the branchless banking channel can be structured, as well as the way they relate to the range of bank services delivered. Given this gap, our objective is to investigate the relationship between network integration models and services delivered through the branchless banking channel. Based on twenty interviews with managers involved with the correspondent banking business and data collected on almost 300 correspondent locations, our research is developed in two steps. First, we created a qualitative taxonomy through which we identified three classes of network integration models. Second, we performed a cluster analysis to explain the groups of financial services that fit each model. By contextualizing correspondents' network integration processes through the lens of transaction costs economics, our results suggest that the more suited to deliver social-oriented, "pro-poor'' services the channel is, the more it is controlled by banks. This research offers contributions to managers and policy makers interested in understanding better how different correspondent banking configurations are related with specific portfolios of services. Researchers interested in the subject of branchless banking can also benefit from the taxonomy presented and the transaction costs analysis of this kind of banking channel, which has been adopted in a number of developing countries all over the world now. (C) 2011 Elsevier B.V. All rights reserved.

Semantic integration of gene expression analysis tools and data sources using software connectors

Abstract Background The study and analysis of gene expression measurements is the primary focus of functional genomics. Once expression data is available, biologists are faced with the task of extracting (new) knowledge associated to the underlying biological phenomenon. Most often, in order to perform this task, biologists execute a number of analysis activities on the available gene expression dataset rather than a single analysis activity. The integration of heteregeneous tools and data sources to create an integrated analysis environment represents a challenging and error-prone task. Semantic integration enables the assignment of unambiguous meanings to data shared among different applications in an integrated environment, allowing the exchange of data in a semantically consistent and meaningful way. This work aims at developing an ontology-based methodology for the semantic integration of gene expression analysis tools and data sources. The proposed methodology relies on software connectors to support not only the access to heterogeneous data sources but also the definition of transformation rules on exchanged data. Results We have studied the different challenges involved in the integration of computer systems and the role software connectors play in this task. We have also studied a number of gene expression technologies, analysis tools and related ontologies in order to devise basic integration scenarios and propose a reference ontology for the gene expression domain. Then, we have defined a number of activities and associated guidelines to prescribe how the development of connectors should be carried out. Finally, we have applied the proposed methodology in the construction of three different integration scenarios involving the use of different tools for the analysis of different types of gene expression data. Conclusions The proposed methodology facilitates the development of connectors capable of semantically integrating different gene expression analysis tools and data sources. The methodology can be used in the development of connectors supporting both simple and nontrivial processing requirements, thus assuring accurate data exchange and information interpretation from exchanged data.