Identificação taxonômica e análise conexionista de bactérias heterotróficas e fatores abióticos de ambientes lóticos sob influência de efluentes do refino no petróleo

This study used a multi-analytical approach based on traditional microbiological methods for cultivation and isolation of heterotrophic bacteria in the laboratory associated with the molecular identification of the isolates and physicochemical analysis of environmental samples. The model chosen for data integration was supported by knowledge from computational neuroscience, and composed by three modules: (i) microbiological parameters, contemplating taxonomic data obtained from the partial sequencing of the 16S rRNA gene from 80 colonies of heterotrophic bacteria isolated by plating method in PCA media. For bacterial colonies isolation were used water samples from Atibaia and Jaguarí rivers collected at the site of water captation for use in effluent treatment, upstream from the entrance of treated effluent from the Paulínia refinery (REPLAN/Petrobras) located in the Paulínia-SP municipality, from the output of the biological treatment plant with stabilization pond and from the raw refinery wastewater; (ii) chemical parameters, ending measures of dissolved oxygen (DO), chemical oxygen demand (COD), biochemical oxygen demand (BOD), chloride, acidity CaCO3, alkalinity, ammonia, nitrite, nitrate, dissolved ions, sulfides, oils and greases; and (iii) physical parameters, comprising the pH determination, conductivity, temperature, transparency, settleable solids, suspended and soluble solids, volatile material, remaining fixing material (RFM), apparent color and turbidity. The results revealed interesting theoretical relationships involving two families of bacteria (Carnobacteriaceae and Aeromonadaceae). Carnobacteriaceae revealed positive theoretical relationships with COD, BOD, nitrate, chloride, temperature, conductivity and apparent color and negative theoretical relationships with the OD. Positive theoretical relationships were shown between Aeromonadaceae and OD and nitrate, while this bacterial family showed negative theoretical...

Desenvolvimento e validação de método bioanalítico para quantificação de tiazolilhidrazona-9 (TZH-9) e determinação da estabilidade em plasma ex vivo

A doença de Chagas é uma doença parasitária causada pelo protozoário Trypanosoma cruzi (T. cruzi), que acomete o sistema digestivo e, principalmente, o cardíaco. É uma doença endêmica principalmente nos países da América Latina. A busca por novos fármacos para o tratamento dessa doença é de suma importância já que os existentes podem causar severos efeitos adversos e são efetivos somente na fase aguda. A molécula tiazolilhidrazona-9 (TZH-9) tem se destacado como uma excelente candidata a fármaco para tratamento da doença de Chagas e a continuidade de seu desenvolvimento deve envolver estudos de farmacocinética e metabolismo. Para a realização destes estudos é necessário o desenvolvimento e validação de um método bioanalítico para a determinação do composto em plasma, assim como avaliar a estabilidade do fármaco nesta matriz biológica com o intuito de verificar a ação de enzimas plasmáticas. Neste trabalho, foi desenvolvido e validado o método bioanalítico para quantificar o TZH-9 em plasma de ratos e humano que apresentou limites de confiança adequados. Também, avaliou-se a estabilidade do TZH-9 nessas matrizes biológicas, em plasma de ratos, o composto apresentou instabilidade após 2 horas na concentração inferior, sugerindo ação de enzimas plasmáticas no seu metabolismo; e em plasma de humanos, apresentou instabilidade após 15 minutos em ambas concentrações, sugerindo a susceptibilidade a ação das enzimas plasmáticas

Estudo para determinação de uma metodologia para o ensaio de arrancamento que avalia aderência aço/concreto

This work talks about the importance of the steel adhesion to concrete, reinforced concrete structures, their testing and forms of measurement used and how the results are used in the structural design, which uses as a reference the NBR 6118 and NBR 7480. It also deals with the importance of a reliable assessment, discussing failures that the test used, NBR 7477, features in specific circumstances, as discussed under the EC-094. It also presents an initial proposal for simplified pullout test, which aims to analyze the grip on steel bars with diameter less than 10 mm, which results when used standardized testing by ABNT NBT 7477, has shown excessive variability, the main criticism of the trial today used without distinction to be established thick or thin bars. The proposal also presented methodology is in the consolidation phase, given the time and the volume of necessary tests. For this reason it is not possible to make a comparison between the values obtained and the results of the test used on the basis of the standard in force, this can only be done once the front with a continuation of this work

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found

Determinação das condições ótimas de fermentação para produção de enzimas celulolíticas pelo fungo Aspergillus niger derivado-marinho, utilizando diferentes subprodutos agroindustriais

Pós-graduação em Biotecnologia - IQ