Estudo comparativo para fabricação de peças aeronáuticas: forjamento x usinagem

This paper shows a technical-economic analysis of the substitution of raw material machined metal parts for a forged preform. At the end, it shows that the economic gain by the machining process substitution for a forged preform is significant for the samples analysed

Utilização da função desirability na otimização do processo de usinagem da superliga NIMONIC 80A

In the current economic scenario, it is important to the incessant search for improvements in production quality and also in reducing costs. The great competition and technological innovation makes customers stay more and more demanding and seek multiple sources of improvement in production. The work aimed to use the general desirability to optimize a process involving multiple answers in machining experiment. The process of cylindrical turning is one of the most common processes of metal cutting machining and involves several factors, in which will be analysed the best combination of the input factors in machining process, with variable response to surface roughness (Ra) and cutting length (Lc) that vary important answers to measure process efficiency and product quality. The method is a case study, since it involves a study of a tool well addressed in the literature. Data analysis was used in the process of doctoral thesis of Ricardo Penteado on the theme using metaheuristicas combined with different methods of bonding for the optimization of a turning process of multiple responses, then used the desirability and analysis tool. Joint optimization by desirability, the method proposed the following combination of input variables, variable cutting speed at 90 m/min ( -1 level), the breakthrough in 0, 12 mm/revol. ( -1 level), the machining depth should be in 1.6 mm (level 1), gum used must be the TP2500 ( -1 level), in abundant fluid (level 1) and laminated material (level 1) to the maximization of the cutting length (Lc) and minimization of roughness (Ra)

Usinagem do alumínio da classe 6005 com uso de ferramenta cerâmica

The machining process is so much important in the economic world. Many machining parameters have been studied to maximize results, in terms of cost and lifetime. (decrease of cutting tool wear, improved surface finish, among others). The objective of this study is to evaluate the wear of a ceramic tool in the machining of the aluminum alloy 6005 A. The analysis of the wear of the cutting tools is very important due to its big impact on the final finishing of the piece as a whole. The evaluation took place in two stages, first it was done a detailed study of the literature of the whole machining process, where the study of the formation and swarf classification were among the most important steps in this phase. The second step consisted in the machining of the piece of aluminum 6005 A with a ceramic cutting tool constituded of aluminum oxide and magnesium oxide with silicon carbide impregnation. The swarf generated in this process was then photographed with a Zeiss optical microscope and analyzed for its size and shape. Through this comparison it was concluded that the swarf are generated shear swarfs, shaped like a tangled, fragmented and arcs connected, thus classifying the material as medium difficulty machining. Through the image analysis tool it was concluded that the parameter of lower wear was the: Vc = 500m / min, f = 0.10mm / rev and ap = 0.5mm