Pesquisa, projeto e construção de um sistema de ignição sem distribuidor

This work intends to know the most types of ignition systems, studying its history, the way it works, applications and some examples. The assembly of a distributor less ignition system is also required. All vehicles powered by internal combustion engines need an ignition system that allows this engine to ignite the air-fuel mixture using its ignition system in the best possible manner. The main goal of an ignition system is to obtain a spark having enough energy to start the chemical reaction of the oxygen and the fuel. It took a study dealing with the various types of ignition systems since their creation at the beginning of the last century until 2015. The work starts studying the high tension magneto ignition system and later together with the low tension ignition system, going on with the conventional ignition system and finally accomplishing with the various types of electronic ignition systems. It was studied and implemented an electronic circuit to power a double spark ignition system also known as wasted spark ignition system. This circuit was assembled with an electric pulse generator and powered mechanically by a dc electric motor of the variable rpm type

Desenvolvimento de uma caixa de redução para veículo Baja SAE

A gear Box in a Baja SAE vehicle is required due to the objectives of the SAE competitions, which the vehicles are challenged to pass through different obstacles. A powertrain system has as the main objective the extension of the torque for the traction shaft of the vehicle, when compared to that one available in the engine. The Objective of this thesis is the description of a gear box project for a Baja SAE vehicle of the Piratas do Vale Team of Unesp Guaratinguetá. In the development of the thesis, a flowchart, developed by the team, was used, which includes a theory part and also the choice of shelf components. In this Project, the type of gearbox was chosen, besides the calculation of axles, gears, bearings and sealers, and software simulations were done for the critical parts. The transmission, developed in this thesis, is more complex than the current one used by the team, but the new one shows improvements, as a new reverse gear with high torque

Avaliação da rigidez torcional do chassi de um protótipo Baja SAE através do método de elementos finitos e de ensaio experimental

The torsional stiffness of chassis is one of the most important properties of a vehicle's structure and therefore its measurement is important. For the first time, the torsional stiffness was considered on the design of a prototype Baja SAE of the team from UNESP - FEG, Equipe Piratas do Vale Bardahl. According to the team's opinion, the increase of stiffness on this prototype, called MB1114, made possible a great improvement in its performance during competitions. In this work, the experimental evaluation of the torsional stiffness from this prototype is performed, detailing the analysis of results, as well as, the hysteresis' effect, least-squares regression and uncertainty analysis. It also shows that it is possible to measure the torsional stiffness of chassis with a low experimental uncertainty without expending many resources. The test rig costed R$ 32,50 due the reuse of materials and the use of instrumentation already available on campus. Furthermore, it is simple to produce and can be easily stocked. Those features are important for Baja and Formula SAE teams. Lastly, the measured value is used to validate the finite element analysis performed by the team during this prototype's design, because similar studies will be performed for the new cars. After investigating the finite element analysis, one result 13,5% higher than the measured value was reached. This difference is believed to be occurred due the imperfections of the finite element model, in other words, for not been possible to simulate every phenomena present on the real model

Simulação da suspensão tipo duplo A de um veículo off-road através do histórico de excitação do solo

The search for mechanical components validation methods, employed in product development sector, becomes more avid for less expensive solutions. As a result, programs that can simulate forces acting on a given part through finite element method are gaining more space in the market, once this process consumes less capital when compared to currently-employed empirical validation. This article shows the simulation of an off-road prototype suspension through such technique, using ground excitation history coming from field measurements and also by making use of a specific tool for obtaining dynamic loads from the model in question. The results shown at the end is key for future enhancements aiming mass reduction, for example, that may be executed on the prototype suspension system discussed here

Proposta de captação de água de chuva de para fins não potáveis em projetos residenciais

Water is an economic, strategic and social valuable resource of the utmost importance to society. This renewable natural resource is increasingly scarce with the growing of populations, industries and agriculture, in addition to the pollution surface and underground water and the waste have aggravated this situation. Investments in the sector of water resources so that this resource meets in quantity and quality the demand from its multiple uses, represent a significant portion of national and regional budgets. Therefore, the use of alternative sources of water capture can reduce the pressure on conventional public water supply systems. In this work was designed and executed a rain water collection system to a residence in the city of Barueri (SP), which can be applied to other residences. In this system, the rooftop of the residence was used as the waterproof and capture area. The gutter and the PVC conductors were used for driving the water to two connected reservoirs. The stored water was designed to address activities that are not potable, such as washing clothes and external areas and garden irrigation. The system showed economic viability, with 34-month return of investment time, wherein after that period, in addition to environmental and social benefits derived from the implementation of the project, the economy made with the payment of public supply rates should be considered. This rainwater capture system is inexpensive and uses materials available in the market. Therefore, its application to a greater number of households should be encouraged as a measure of sustainable water management

Da coordenação modular à construção modular: estudos de caso

The presented work aimed to present the Modular Construction scenario, relating it to the fundamentals assumptions on the Modular Coordination Theory. The presentation of this theory, its historical development, its scope and tools, were conceived to further, show how the applicability on the conceptual and design phases is done. Also, studies cases are shown, in order to illustrate didactically how this process occurs. Basing on these studies, considerations are made about the use of modulation in projects in Brazil, at the expense of what happens on the international scenario, to highlight the importance of Modular Coordination for raising the standards of construction quality and rationality in the country

Avaliação do software Autodesk Revit 2016 para quantificação por meio da modelagem da informação da construção

The building budgeting quickly and accurately is a challenge faced by the companies in the sector. The cost estimation process is performed from the quantity takeoff and this process of quantification, historically, through the analysis of the project, scope of work and project information contained in 2D design, text files and spreadsheets. This method, in many cases, present itself flawed, influencing the making management decisions, once it is closely coupled to time and cost management. In this scenario, this work intends to make a critical analysis of conventional process of quantity takeoff, from the quantification through 2D designs, and with the use of the software Autodesk Revit 2016, which uses the concepts of building information modeling for automated quantity takeoff of 3D model construction. It is noted that the 3D modeling process should be aligned with the goals of budgeting. The use of BIM technology programs provides several benefits compared to traditional quantity takeoff process, representing gains in productivity, transparency and assertiveness