Membranas de biocelulose como substrato para o crescimento de nanofios de ZnO: síntese e aplicação

Pós-graduação em Química - IQ

Avifauna em matas ciliares: caracterização visando ações de emergência, mitigação e compensação em caso de derramamento de combustíveis em vias hidroviárias

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Colunas de Winogradsky com águas contaminadas por petróleo e derivados monitoradas por ensaios ecotoxicológicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Identificação taxonômica e análise conexionista de bactérias heterotróficas e fatores abióticos de ambientes lóticos sob influência de efluentes do refino no petróleo

This study used a multi-analytical approach based on traditional microbiological methods for cultivation and isolation of heterotrophic bacteria in the laboratory associated with the molecular identification of the isolates and physicochemical analysis of environmental samples. The model chosen for data integration was supported by knowledge from computational neuroscience, and composed by three modules: (i) microbiological parameters, contemplating taxonomic data obtained from the partial sequencing of the 16S rRNA gene from 80 colonies of heterotrophic bacteria isolated by plating method in PCA media. For bacterial colonies isolation were used water samples from Atibaia and Jaguarí rivers collected at the site of water captation for use in effluent treatment, upstream from the entrance of treated effluent from the Paulínia refinery (REPLAN/Petrobras) located in the Paulínia-SP municipality, from the output of the biological treatment plant with stabilization pond and from the raw refinery wastewater; (ii) chemical parameters, ending measures of dissolved oxygen (DO), chemical oxygen demand (COD), biochemical oxygen demand (BOD), chloride, acidity CaCO3, alkalinity, ammonia, nitrite, nitrate, dissolved ions, sulfides, oils and greases; and (iii) physical parameters, comprising the pH determination, conductivity, temperature, transparency, settleable solids, suspended and soluble solids, volatile material, remaining fixing material (RFM), apparent color and turbidity. The results revealed interesting theoretical relationships involving two families of bacteria (Carnobacteriaceae and Aeromonadaceae). Carnobacteriaceae revealed positive theoretical relationships with COD, BOD, nitrate, chloride, temperature, conductivity and apparent color and negative theoretical relationships with the OD. Positive theoretical relationships were shown between Aeromonadaceae and OD and nitrate, while this bacterial family showed negative theoretical...

Características do aço API X70 utilizado em tubos de transporte de petróleo e gás

Having in mind that petroleum's history presents a huge growth, the exploration and production areas have been receiving lots of investments, in order to attend the increasing demand for gas and petroleum. Looking through that scenario, new technologies have been evolving in favor of discovering new natural petroleum deposits and act with effectiveness in truly deep waters without giving up the worldwide best operational security practices. The use of rigid pipes in marine installations have been rising quickly and, thanks to this reality, the many storage and pipe launching forms became study objects and are getting improved. The analysis of steel API X70 characteristics, proving that they are suitable for use in pipes developed to transport gas and petroleum is the theme of this presentation. A tensile test was conducted to determine the base metal's mechanical properties, draining's tension, traction's resistance, elasticity's modulus and maximum tension. An aspect that is concerning too is the metallographic analysis, in order to determine the studied iron's microstructure. Results of analyzes showed that the steel has high resistance, with good capacity for deformation and well defined yield point, concluding suitable for the application in question

Avaliação da atividade antifúngica de peptídeos derivados da histatina-5 para o tratamento de candidose bucal

Os peptídeos têm sido amplamente estudados e demonstrados como uma estratégia promissora no combate a micro-organismos patogênicos, devido aos inovadores mecanismos de ação que apresentam e a menor indução de resistência nos microorganismos. Os peptídeos da família das Histatinas, naturalmente presentes na saliva humana, são os principais agentes que auxiliam na cicatrização e oclusão de feridas, re-epitelização e, além disso, dispõem de mecanismos de ação contra microorganismos, em especial, a Candida albicans. O agente etiológico da Candidiose bucal é a Candida albicans, um patógeno de origem fúngica, que acomete indivíduos de todas as idades, indivíduos imunologicamente debilitados e, especialmente, os usuários de próteses dentárias. Um importante fator de virulência da Candida albicans é a habilidade de formar biofilmes, estrutura comunitária microbiana revestida por exopolissacarídeos, capaz de aderir-se a superfícies lisas. Os biofilmes associam-se com a capacidade de causar infecções, com o desenvolvimento de resistência contra o sistema imune do hospedeiro e contra os antifúngicos. O uso indiscriminado e a exposição prolongada aos antifúngicos induz o surgimento de resistência a esses medicamentos, além disso existem cepas de Candida albicans resistentes ao tratamento com antifúngicos azólicos. Devido a isso surge a necessidade de desenvolvimento de novos alvos terapêuticos. O objetivo desse estudo consiste no desenvolvimento de análogos da Histatina-5 com algumas modificações estruturais, a fim de potencializar a ação terapêutica já comprovada dos peptídeos da família das Histatinas. A Histatina-5GH apresenta maior carga positiva que os demais peptídeos devido a troca de duas glicinas na estrutura da Histatina-5 por duas histidinas. Por sua vez, a Histatina-5SC possui o resíduo de serina C-terminal substituído por...

Síntese e caracterização de derivados de benzofenona e ácido cinâmico com atividade fotoprotetora

A radiação ultravioleta emitida pela radiação solar pode causar sérios danos à pele humana, sendo essa estratificada em três regiões do espectro de luz: UVA (315-400nm), UVB (280-315nm) e UVC (200-280nm). A incidência da radiação UVA sobre a pele induz a formação de espécies reativas de oxigênio (EROS), afetando indiretamente o DNA humano, podendo provocar câncer de pele. Além disso, a radiação UVB afeta diretamente as bases pirimidínicas das moléculas de DNA, aumentando sua produção e favorecendo processos mutagênicos, produzindo novas células tumorigênicas também. Entre os filtros solares químicos conhecidos estão as benzofenonas e os cinamatos. O objetivo deste trabalho foi sintetizar pró-fármacos derivados de filtros solares químicos baseados nas estruturas das benzofenonas ligadas à derivados do ácido cinâmico, com propriedades antioxidantes para, desta maneira, obter um composto que prevenisse a carcinogênese cutânea por diferentes vertentes. Foram obtidos dois compostos, os quais foram caracterizados estruturalmente por Ressonância Magnética Nuclear de Hidrogênio e sua capacidade fotoprotetora através do método Optometrics, indicando atividade promissora.

Estudo do efeito Bauschinger em tubos de aço API 5l x70 aplicados no transporte de petróleo e gás

Despite the growing concern in seeking more sustainable energy sources, oil demand is likely to grow in coming years. To keep up with this growth, the oil industry has increasingly invested in innovation and efficiency. Knowing that, new technologies have been developed to explore deeper waters, without giving up the best practices in worldwide operational safety. The use of rigid pipelines in deepwater offshore facilities is increasing quickly and because of this, the ways of storing and launching pipe have been studied and perfected. In this paper the Bauschinger effect on API 5L X70 steel was analyzed proving that there was a reduction in yield strength when an effort was applied in a previous direction, then an effort was then applied in the opposite direction. To observe this phenomenon, the tensile test was conducted to determine the mechanical properties of the base metal, such as yield stress, tensile strength, elasticity and maximum tensile, so then compare it with the results obtained in the Bauschinger Effect Test. The analysis results showed that the steel had high resistance, with good plastic deformation capacity without failing, well-defined yield point, showing itself appropriate for the operation of oil and gas pipes

Obtenção e caracterização de nanocelulose a partir de fibras de Chorisia speciosa St. Hil

Natural fibers have been highlighted as a renewable material that can replace materials from oil and its derivatives. In this context, Brazil becomes the perfect setting because of the diversity of fibers found in its territory, such as sugarcane, sisal, rice, cotton, coconut, pineapple, among others. The paineiras (Chorisia speciosa St. Hil) are typically Brazilian trees, which produce paina as fruit. These fruits are still little studied as a source of lignocellulose by research groups. This project aimed obtaining and characterization of cellulose nanofibers from the fibers from the paina fibers. Obtaining nanocellulose is practically made through simplified chemical processes. First, was performed out pre-treatments to removal of waxes, lignin and hemicellulose. The first stage of pre-treatment was carried out by alkaline aqueous solution of sodium hydroxide (NaOH) at 5wt%, where the fibers were under constant agitation for 1h at 70°C. Through alkali treatment it was possible to remove most of the lignin, hemicellulose, waxes and extractives. After the alkaline treatment was done bleaching with an aqueous solution of sodium hydroxide (NaOH) to 4wt% and hydrogen peroxide (H2O2) to 24wt% 1:1 during 2h with constant stirring to 50 °C. Through bleaching was possibe to remove residual lignin, and got cellulose with 72% of crystallinity. Nanocellulose of paina fibers was extracted using different conditions of acid hydrolysis with sulfuric acid (H2SO4) to 50wt%. After acid hydrolysis, the suspensions were centrifuged during 30 min and dialyzed in water to remove excess acid until neutral pH (6-7). Then the suspensions were passed by ultrasonification in an ultrasound 20 kHz during 1h in an ice bath. Untreated, alkalinized and bleached fibers as well as cellulose nanoparticles were characterized by the techniques of thermogravimetry ... (Complete abastract click electronic access below)