Avaliação da resistência à corrosão da liga Ti-30Ta submetida a diferentes taxas de deformação visando aplicações biomédicas

This study aims to evaluate the corrosion resistance of Ti-30Ta alloy when subjected to different strain rates. Samples of the alloy Ti-30Ta were obtained from the melting of pure elements in the arc furnace in inert atmosphere (argon gas). Then, the samples were subjected to a thermal treatment and to cold worked to obtain bars. After forging, the samples were machined in accordance with ASTME9-09 standard for carried out compression tests. To microstructural characterization, samples were sectioned longitudinal and transversally and embedded in resin. After, the wet sanding and polishing were performed, followed by a chemical attack, in order to study the microstructure under an optical microscope. Microhardness was measured on the samples that were subjected to microstructural characterization by using microhardness tester. Phases were evaluated by x-rays diffraction. Corrosion tests were carried out to evaluate the influence of deformation on the corrosion resistance. Results show that microstructure was not influenced by deformation

Desempenho mecânico de embalagens rígidas utilizadas na indústria agroquímica: estudo de compressão

The world population is growing at exponential scales, thus the demand for food grows significantly. The use of pesticides is seen as a way to meet the demand for food and increase the efficiency and productivity of the agricultural sector. BASF SA in partnership with packaging suppliers represent a remarkable scene in the Brazilian market in the agrochemicals sector. In 2014, the Department of Agro from BASF Packaging, identified in its production process certain deformation of its rigid packaging during the filling process of pesticides. This phenomenon is probably caused by the low resistance to compression that the package is used. In order to eliminate the deformation of rigid packaging arising from the filling step, a study will be conducted in conjunction with the supplier JET UNIPAC whose on line problems occurred more frequently. The study is to identify the strength of the rigid containers standardize a compression resistance value at which the package is not deformed after the filling step. This study will present an investigation through experiments combined with theoretical concepts in order to determine possible causes for the emergence of this phenomenon. At the end of the study, a solution to eliminate or reduce to the maximum the packaging deformation problem appears

Determinação comparativa do grau de deformação plástica aplicado a componentes obtidos por conformação

The manufacturing process of components of Pressure Vessels has a great importance in the efficiency during the operation and life cycle of the equipment. Taking this into account, the objective of this dissertation was to analyze the methods to determine the strain rate in formed components by measuring the components themselves, and posterior results comparison with the values found in manufacturing standards of Pressure vessels. In this study the whole manufacturing process of a component from a pressure vessel, known as Head or End, was accompanied. Using the methodology obtained from literatures it was possible to execute the relative and logarithmic deformation measurements of these components and compare with the obtained results by means of equations presented in the Standards as AD-Merkblatt and ASME (for pressure vessels). The found results were also compared with the logarithmic methodology, taking into account the deformation of the empirical mesh and the thickness of the components studied. It is possible to conclude from this study that despite the existence of empirical methods of measurement of strain rate in components plastically formed, it is recommended the adoption in all situation of the component manufacturing standard. It can be noticed and explained during the development of this study and through the results found