Análise estrutural do conjunto de palhetas de um aerador da estação de tratamento de efluentes

This work aims to find the maximum tension in a group of blades in a Sewage Treatment Stations in a company located in Vale do Paraíba. First, the calculations of the strength requested by the effluents on the structure are done, and the optimum torque of the frame screws is researched. From these data, static simulations using appropriate software and the finite elements method are performed. Based on the results, a possible solution to reduce the strength in this structure is proposed. This study will be provided as a consultation material to the company

Desenvolvimento de células solares de perovskita baseadas em filmes de óxidos nanoestruturados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Como o aluminío influencia o metabolismo e o crescimento da raiz de Citrus limonia?

O alumínio (Al) em solos ácidos encontra-se na forma Al3+, sendo considerado tóxico às plantas de interesse agronômico, como o limoeiro Cravo (Citrus limonia), afetando principalmente seu crescimento radicular . O presente estudo avaliou como o Al influencia as raízes de C. limonia, visando correlacionar a concentração endógenea de IAA, a expressão dos genes SAUR X10A e SAUR 15A e a inibição do crescimento radicular. As plantas foram submetidas à hidroponia em diferentes concentrações de Al na solução nutritiva (0, 370 μM, 740 μM, 1110 μM, e 1480), tendo seu crescimento avaliado semanalmente em um período de dois meses. Além disso, as soluções contrastantes tiveram a expressão gênica e a concentração endógenea de IAA avaliados utilizando qRT-PCR e GC-MS, respectivamente. O tratamento com Al inibiu o crescimento radicular das plantas, além de alterar a concentração de IAA nas raízes (apresentou-se algumas vezes maior nas primeiras semanas em relação ao controle, havendo um decaimento e igualação na concentração hormonal de ambos os tratamentos) e inibir a expressão dos genes SAUR. A inibição do crescimento radicular pode ser atribuida à uma mudança de padrão e acumulação do ácido indol-acético (IAA) no ápice da raiz, provocada pela alteração na distribuição das proteínas de transporte. Concomitantemente, proteínas da família SAUR (small auxin-up RNA) têm suas expressões gênicas induzidas em presença de IAA e estão relacionadas à acidificação do apoplasto: a queda na atividade da H+-ATPase provoca a altereção do pH nesta região prejudicando a alongação da célula via crescimento ácido. Embora haja uma mesma quantidade de IAA na raiz, os genes SAUR são reprimidos na condição de estresse pelo Al, indicando que a inibição do crescimento radicular em C. limonia deve ocorrer em resposta a um conjunto de fatores

Estudo da resistência à corrosão de ligas Ni-Cr-Mo-Ta E Ni-Cr-Mo-W em solução NaF 0,08 mol/L, pH 4,7 para aplicações odontológicas

A large number of metal alloys are used in Dentistry for the manufacture of fixed and removable dentures. In the oral cavity, these structures are exposed to a chemically aggressive medium, like saliva and mechanical efforts, like mastication. In addition, acidic solutions containing fluoride ions are also frequently used in dental treatments to prevent dental plates and decays development. In this context, it was considered important to investigate the influence that a fourth element could exert when added to the ternary alloy Ni-Cr-Mo, largely used in Brazil. Therefore, electrochemical tests were done to evaluate the resistance to corrosion of quaternary alloy 65Ni-25Cr-5Mo-5Ta and 65Ni-25Cr-5Mo-5W in NaF solution 0,08mol / L, pH = 4.7. For greater understanding the microstructure and morphology of alloys were studied, through metallographic analysis, using optics microscopy and electron microscopy scanning. For the electrochemical tests were applied techniques traditionally used in corrosion researches, such as: potential measures in open circuit (OCP) and cyclic polarization (CP). It was found that both quaternary alloys showed very similar results. Comparing these quaternary alloys with the ternary 65Ni-25Cr-10Mo, it was found that the quaternary alloys exhibit greater resistance to corrosion, in other words, less passivation current density than the ternary alloy, showing that it is advantageous to add a fourth element in the alloy

Introdução à identificação de sistemas utilizando o System Identification Toolbox do MATLAB em conjunto com o Arduino para o laboratório de controle linear

The education designed and planned in a clear and objective manner is of paramount importance for universities to prepare competent professionals for the labor market, and above all can serve the population with an efficient work. Specifically, in relation to engineering, conducting classes in the laboratories it is very important for the application of theory and development of the practical part of the student. The planning and preparation of laboratories, as well as laboratory equipment and activities should be developed in a succinct and clear way, showing to students how to apply in practice what has been learned in theory and often shows them why and where it can be used when they become engineers. This work uses the MATLAB together with the System Identification Toolbox and Arduino for the identification of linear systems in Linear Control Lab. MATLAB is a widely used program in the engineering area for numerical computation, signal processing, graphing, system identification, among other functions. Thus the introduction to MATLAB and consequently the identification of systems using the System Identification Toolbox becomes relevant in the formation of students to thereafter when necessary to identify a system the base and the concept has been seen. For this procedure the open source platform Arduino was used as a data acquisition board being the same also introduced to the student, offering them a range of software and hardware for learning, giving you every day more luggage to their training

Desempenho mecânico de embalagens rígidas utilizadas na indústria agroquímica: estudo de compressão

The world population is growing at exponential scales, thus the demand for food grows significantly. The use of pesticides is seen as a way to meet the demand for food and increase the efficiency and productivity of the agricultural sector. BASF SA in partnership with packaging suppliers represent a remarkable scene in the Brazilian market in the agrochemicals sector. In 2014, the Department of Agro from BASF Packaging, identified in its production process certain deformation of its rigid packaging during the filling process of pesticides. This phenomenon is probably caused by the low resistance to compression that the package is used. In order to eliminate the deformation of rigid packaging arising from the filling step, a study will be conducted in conjunction with the supplier JET UNIPAC whose on line problems occurred more frequently. The study is to identify the strength of the rigid containers standardize a compression resistance value at which the package is not deformed after the filling step. This study will present an investigation through experiments combined with theoretical concepts in order to determine possible causes for the emergence of this phenomenon. At the end of the study, a solution to eliminate or reduce to the maximum the packaging deformation problem appears