Sensoriamento óptico quase-distribuído aplicado ao monitoramento de trocadores de calor de usinas hidrelétricas

This work aims to develop optical sensors for temperature monitoring in hydroelectric power plant heat exchangers. The proposed sensors are based on the Fiber Bragg Gratings technology. First of all, a prototype with three sensors inscribed in a same fiber was developed. This fiber was then fixed to a conventional Pt100 sensor rod and inserted in a thermowell. The ensemble was then calibrated in a workbench, presenting a maximum combined uncertainty of 2,06 °C. The sensor was installed in one of the heat exchangers of the Salto Osório’s hydroelectric power plant. This power plant is situated in the Iguaçu river, at the Paraná state. Despite the satisfactory results, the sensor was improved to a second version. In this, fifteen optical Bragg sensors were inscribed in a same fiber. The fixation with a conventional sensor was no longer necessary, because the first version results comproved the efficiency and response time in comparison to a conventional sensor. For this reason, it was decided to position the fiber inside a stainless steel rod, due to his low thermal expansion coefficient and high corrosion immunity. The utilization of fifteen fiber Bragg gratings aims to improve the sensor spatial resolution. Therefore, measurements every ten centimeters with respect to the heat exchanger’s height are possible. This provides the generation of a thermal map of the heat exchanger’s surface, which can be used for determination of possible points of obstruction in the hydraulic circuit of the heat exchanger. The heat exchanger’s obstruction in hydroelectric power plants usually occur by bio-fouling, and has direct influence in the generator’s cooling system efficiency. The obtained results have demonstrated the feasibility in application of the optical sensors technology in hydroelectric power plants.

Proposta de um processo de transferência de tecnologia para as instituições públicas de pesquisa: o caso da Embrapa

The Brazilian agricultural research agency has, over the years, contributed to solve social problems and to promote new knowledge, incorporating new advances and seeking technological independence of the country, through the transfer of knowledge and technology generated. However, the process of transfering of knowledge and technology has represented a big challenge for public institutions. The Embrapa is the largest and main brazilian agricultural research company, with a staff of 9.790 employees, being 2.440 researchers and an annual budget of R$ 2.52 billion. Operates through 46 decentralized research units, and coordinate of the National Agricultural Research System - SNPA. Considering that technology transfer is the consecration of effort and resources spent for the generation of knowledge and the validity of the research, this work aims to conduct an assessment of the performance of Embrapa Swine and Poultry along the production chain of broilers and propose a technology transfer model for this chain, which can be used by the Public Institutions Research – IPPs. This study is justified by the importance of agricultural research for the country, and the importance of the institution addressed. The methodology used was the case study with a qualitative approach, documentary and bibliographic research and interviews with use of semi-structured questionnaires. The survey was conducted in three stages. In the first stage, there was a diagnosis of the Technology Transfer Process (TT), the contribution of the Embrapa Swine and poultry for the supply chain for broiler. At this stage it was used bibliographical and documentary research and semi- structured interviews with agroindustrial broiler agents, researchers at Embrapa Swine and Poultry, professionals of technology transfer, from the Embrapa and Embrapa Swine and Poultry, managers of technology transfer and researchers from the Agricultural Research Service - ARS. In the second step, a model was developed for the technology transferring poultry process of Embrapa. In this phase, there were made documentary and bibliographic research and analysis of information obtained in the interviews. The third phase was to validate the proposed model in the various sectors of the broilers productive chain. The data show that, although the Embrapa Swine and Poultry develops technologies for broiler production chain, the rate of adoption of these technologies by the chain is very low. It was also diagnosed that there is a gap between the institution and the various links of the chain. It was proposed an observatory mechanism to approximate Embrapa Swine and Poultry and the agents of the broiler chain for identifying and discussing research priorities. The proposed model seeks to improve the interaction between the institution and the chain, in order to identify the chain real research demands and the search and the joint development of solutions for these demands. The proposed TT model was approved by a large majority (96.77%) of the interviewed agents who work in the various links in the chain, as well as by representatives (92%) of the entities linked to this chain. The acceptance of the proposed model demonstrates the willingness of the chain to approach Embrapa Swine and Poultry, and to seek joint solutions to existing problems.