13 resultados para Tráfego : Controle : Brasil
em Repositório Institucional da Universidade Tecnológica Federal do Paraná (RIUT)
Resumo:
The work consists in wheat production system and the evolution of damage caused by wheat scab. The study considers the lack of resistant cultivars to the disease, the low efficiency of chemical control and the presence of mycotoxins in grains. The study aimed to confirm the effectiveness of fungicides prothioconazole and metconazole; prove the bar deposition efficiency with nozzles directed jets the side of the ear resulting in full coverage of trapped anthers; prove the viability of using a warning system (application after the start of flowering before the onset of rains provided for future 24-48 hours and try to improve the efficiency in controlling scab. The experiment was conducted in the experimental field of Technological University Federal do Paraná in the city of Pato Branco, Paraná, conducted in two seasons, the first established on May 6, 2014 and the second on 21 May 2014. It was used to cultivate Amethyst field of OR Improvement seeds, . Passo Fundo, Rio Grande do Sul Treatments consisted of a control without fungicide application and one and two applications of prothioconazole + 17.5% trifloxystrobin (Fox) 500 ml / ha; metconazole 8.0% + pyraclostrobin 13% ( Opera Ultra) 750 mL / ha In the evaluation, second season, metconazole + pyraclostrobin with two application statistically was the treatment that showed a lower incidence in spikes reducing from 100 to 63.3%;. metconazole + pyraclostrobin performed better also in reducing the incidence of spikelets, 80.3% to 34.7%; the control ears had better results in the second season with two applications of metconazole + pyraclostrobin; in spikelets, in his first season, metconazole + pyraclostrobin with two application resulted in better control with 67%; with two applications of metconazole + pyraclostrobin gave the highest yield even under climatic conditions favorable to disease; metconazole + pyraclostrobin in both seasons showed superior efficiency in controlling FHB giving greater weight gain; with two application of both fungicides, the hectoliter weight was 81 and 79, respectively, each fungicide; the application of fungicides was made in advance of expected rain, occurring seven days of rain and a total volume of 85,2mm the first time, and 16 days of rain and an accumulation of 400 mm in the second period; the test efficiency can be confirmed when the direction of the spray jets launched wings coupled in double nozzle bodies perpendicular to the target upright reaches the sides of the spike. The metconazole + pyraclostrobin proved the most effective fungicide against the prothioconazole + trifloxystrobin in wheat scab control in the 2014 harvest.
Resumo:
The agriculture with the use of products with less environmental impact is expanding. In it, the producers offer their products without the use of synthetic chemical inputs, solving the phytosanitary problems with the use of biological or alternative control agents such as parasites, predators, entomopathogenic, alternative products, plant extracts and essential oils. These products can be considered safe to non-target organisms, but studies are needed to find these features on natural enemies and on the beneficial insects such as bees, common frequenter of cultures. In this sense, this study aims to evaluate the effects of control over reproductive quality queens of Apis mellifera L. (Hymenoptera: Apidae) Africanized. For this, it tested the action of control products on the production of A. mellifera queens, using the commercial entomopathogenic fungus Boveril® 1,0x108 (Beauveria bassiana) and aqueous extract of pomegranate (Punica granatum) at a concentration of 5% sterile distilled water with Tween (0.01%) and sterile distilled water (controls). The treatments were incorporated into a tissue type gauze, wrapped in an acrylic plate and packed inside minirrecrias type colonies for the production of queens on the day before the transfer of larvae. The next day were introduced battens with 30 domes with larvae to produce queens, so the workers have contacted the agent tested. From the emergence of all the queens, they were monitored to determine the measures of body weight (mg), length and width of wing and abdomen, length, width and height of the chest (mm) as well as the time of emergence of queens. The next step was evaluated the influence of the control agents in production creates, performing measurements of creating areas in cm2 for six straight weeks. It was found that the area creates Queens did not differ among the treatments. Histological analysis of hipofaringeanas of workers glands that came into contact with the control agents and the midgut of virgin queens were also held. Histological analysis differences were observed in the tissues when the treatments were compared with the respective controls.
Resumo:
Induction of resistance is defined as the activation of a state of resistance against diseases which is induced systemically in plants by the use of biotic or abiotic agents without any modification of the plant genome, occurring non-specific way, by activating genes coding for various plant defense responses. Chitosan is a polymer derived from the deacetylation of chitin, which is found in large quantities in crustacean shell, and studied with the potential to control plant pathogens, both by its direct fungistatic action, as the ability to induce protection of plants, indicating the presence of molecules of elicitoras characteristics. Three experiments with objective of evaluating the potential of chitosan in the seedling resistance induction were developed, beet (Beta vulgaris) seeds, cucumber (Cucumis sativus) seeds and tomato (Solanum lycopersicum) seeds, and the control of Fusarium sp., Rhizoctonia solani K¨uhn e Pythium sp. in vitro conditions. The experimental design was completely randomized, with four replications. Beet seeds, tomato and cucumber were submerged in chitosan solution for 20 minutes, in concentrations of 0.25, 0.5, 1 and 2% in the control and distilled water. Seeds were sown in trays containing Plantmax Florestalr substrate sterilized and inoculated with Fusarium sp., Rhizoctonia solani K¨unh and Pythium sp., respectively for the three cultures. The experiment was conducted for 14 days in growth chamber with controlled temperature (25 C 2 C), light (12 hour photoperiod) and humidity (70% 10%). The evaluations were seed emergency, seedling damping-off, seedling length, fresh weight and activity of the enzymes phenylalanine amˆonia-liase (PAL), chitinase and b-1,3-glucanase. It was also rated the mycelial growth of Fusarium sp., Pythium sp. and R. solani on P.D.A. (Potato-Dextrose and Agar) culture medium containing chitosan at the same concentrations evaluated in seeds. For beet growing, seed treatment with chitosan presented higher emergence and the length of the seedlings, and reduced the percentage of tipping. Treatment with chitosan activated the systemic acquired resistance with expression of chitinase and b-1,3-glucanase enzymes. For the tomato crop in chitosan concentration of 0.25% favored the emergency of seedlings, reduced the incidence of tipping and activated the PAL enzymes, chitinase and b-1,3-glucanase. In cucumber on the concentration of up 0.5% favored seedlings emergence and reduces the incidence of tipping. Chitosan activated the PAL enzymes and b-1,3-glucanase. Chitosan also presented fungistatic action on the initial growth of Pythium sp. and R. solani in vitro conditions, however, such action did not prevail until the end of the experiment. To Fusarium sp. the concentration of chitosan resulted in the reduction of mycelial growth in vitro.
Resumo:
The crops are affected by pests and diseases that decrease productivity. Among them are the damping off of seedlings that can occur in pre and post-emergence. In bean crops, cucumber and beet these diseases occur, being caused by various pathogens, especialy fitopathogenic fungi. Several measures are used for the controle of such diseases, among them, is the chemical seed treatment fungicides. However, society has become increasingly concerned about the quality and food and environmental contamination, generation a growting search for sensitive products to humans and the environment. The use of essential oils to control plant pathogens is an example of alternative tested by science in the search for less aggressive technologies. This study aimed to evaluate the efficiency of the use of essential oil Aloysia citriodora, in control of pathogens causing damping off in beans, cucumber and beet. This thesis was divided in four chapters, the introductory first, and the other addressing the control of Pythium sp. in beans, Sclerotinia sclerotiorum on cucumber, and Fusarium sp. on beet. The methodology consisted of four experiments in each pathosystem, with all the work done at the Federal Technological University of Parana, Campus Dois Vizinhos. In the first experiment evaluated the fungistatic and fungicidal effect of the essential oil of A. citriodora on PDA in vitro in mycelial growth of pathogens studied. In the second experiment evaluated the in vitro effect of essential oil concentrations of A. citriodora in BD medium on microscope slides, on the germination of sporangia Pythium sp. and conidia Fusarium sp., and in Petri dishes with PDA medium, the sclerotia germination speed index of S. sclerotiorum. In the third experiment, we evaluated in germination test in paper roll (PR), the phytotoxic effect or not the use of essential oil concentrations of A. citriodora in dry bean seed, cucumber and beet. The variables used to assess this experiment were the germination percentage, mediun green mass per plant and average length of seedlings. In the fourth experiment we assessed the effect of treating bean seeds, cucumber and beet with essential oil contents of A. citriodora, seeds in their subsequent substrates contamined with pathogens studied, Pythium sp., S. sclerotiorum and Fusarium sp. In this experiment we used the following variables: percentage of emergence, percentage of post-emergence damping off, green average mass per plant, average length per plant and biochemical analyzes. The biochemistry of plant tissues evaluated were as follows: protein content, enzymatic activities of peroxidases, phenylalanine ammonia-liase (PAL), chitinases and β-1,3-glucanases. The in vitro results show that the essential oil has fungistatic and fungicidal effect on mycelial growth, on sporangia germination, conidia and sclerotia of the pathogens studied in this work, wich may be related to its major components, citral and limonene. The oil also exhibits low phytotoxicity to seeds of the species studied, only in beans decreases germination in most studied dosage (0,25%), cucumber also in the higher dosage (0,25%) reduce the length of seedlings, and beet there were no negative effects to the seedlings. In the test in substrate contaminated with the pathogens, the use of essential oil: increased germination and decreased post emergence damping off of beans seedlings; at a concentration of 0,0625% decreases post emergence damping off in cucumber. In biochemical analyzes found an increase in the enzymatic activity of peroxidases and β-1,3-glucanases on beans, and glucanases on cucumber, and increased enzyme activity of peroxidases on beet, showing action in resistance induction at damping off.
Resumo:
This study aimed to determine the concentration and inorganic chemical composition of samples from airborne particulate matter inhaled in fine and coarse fractions. Aerosol samples were collected in 2013 and 2014, from sites located in the cities of Londrina and Maringa, in the state of Paraná, Brazil. The samples were collected daily (24h) in two campaigns: winter and summer. For the collection, was used a dichotomous sampler with quartz fiber filter with 47 mm in size and 2 µm porosity, 97% efficiency, retaining particles of up to 0.3 µm. Quantification of the airborne particulate matter mass was performed by gravimetry method. The results from Londrina to PM2.5 and MP2,5-10 represent, respectively, 29.2% and 70.8% of airborne particulate matter in the winter campaign (2013), 30.9% (PM2.5) and 69.1 % (MP2,5-10) in the summer campaign (2013), and 35.9% (PM2.5) and 64.1% (MP2,5-10) in the winter 2014 campaign. In the city of Maringa, the results presented the percentage of 42.0% (PM2.5) and 58.0% (MP2,5-10) for the winter season (2014), and 28.8% (PM2.5) and 71.2 % (MP2,5-10) for the summer season (2014). The PM2.5/PM10 ratio was on average 0.3, demonstrating that both cities are developing urban areas. Analysis of the major soluble inorganic species in water (NO3-, SO42- and Cl-) associated with MP2,5-10 were quantified by ion chromatography at the LACA Laboratory in the State University of Londrina, with the largest contribution found in all campaigns was to NO3-. The NO3-/SO42- ratios above 1.0 indicate the local traffic contribution. The analysis of metals associated with PM2.5 was carried out by mass spectrometry with inductively coupled plasma (ICP-MS) in the Federal University of Santa Catarina. The Zn, Pb, Cu and Mn concentrations found in all campaigns indicate the contribution of mobile sources to PM2.5. The concentration of BCe in PM2.5 was determined by reflectance, with higher BCe concentrations being found in winter campaigns. In general, Londrina presented the highest concentrations from the species analyzed when compared to Maringá. In addition, the analysis of the air mass trajectories indicated the transportation of pollutants coming mainly from fires in the southeastern region of the country.
Resumo:
The fungus Rhizoctonia solani is a soil borne pathogen that causes damage to various crops. The chemical control, when managed incorrectly, can be harmful to the environment, which makes the study of alternative control important. This study aimed to evaluate the ability of different doses of Liquid swine manure (LSM), with and without the retention of gases, at different soil pH levels, to control R. solani in beet. An inoculum of the fungus R. solani was on rice grains, which had been previously sterilised. The experiments were set up in a greenhouse in a completely randomised block design, arranged in a three-factor 2 x 2 x 5 scheme, comprising of soil pH levels (4.8 and 7.2) x with and without gas retention x LSM dose (0, 5, 10, 15 and 20%), with four replications per treatment. To setup the experiments, 4 kg of soil of each pH level were packed separately into plastic bags. Subsequently, the soil of each bag was infested with 15 g of fungus inoculum/kg of soil, and moistened as necessary. After seven days of infestation of the soil with the pathogen the different doses of LSM were incorporated separately into the bags, the bags designated as the gas retention treatment were closed, while those designated as the gas release treatment were left open. After seven days, part of the soil from each bag was packed separately into 16 cells of 128 cell Styrofoam trays, which were then seeded with two beet seeds per cell. The other part of the soil was placed in 2 litre pots, to conduct the quantification of microbial activity, through the method of CO2 release, 21 days after the experiment was setup. Seedling emergence and damping-off evaluations were performed daily for 21 days consecutively. The data was submitted to analysis of variance, and when significant were submitted to regression analysis or Tukey at 5% probability of error. The experiments were repeated twice. According to the results obtained, there was a suppressive effect of LSM on R. solani. For the variable emergence, the 10% dose of LSM resulted in the largest number of emerging plants in the two soil pH levels studied, whether or not gas was retained. Seedling dampingoff decreased with increasing volumes of LSM incorporated into the soil. The soil with the pH level of 7.2 presented less seedling damping-off than the soil with a pH level of 4.8. The retention of gases provided greater control of R. solani in the higher LSM doses and in soil with a pH level of 7.2. Also noted in this study that there was a significant increase in microbial activity with increasing doses of LSM when applied to soil with pH levels of 4.8 and 7.2. Based on these results, it was concluded that the 10% dose of LSM provided the best control of R. solani without harming seedling emergence.
Resumo:
The National School Feeding Programme (PNAE) is a public policy in Brazil for over 60 years and represents one of the most important programs of feeding and nutrition in the world. The role of family farming as a source of employment in rural areas, food provider and for ensuring much of the Brazil’s food security is constantly present at the government's and social movement’s agendas. Law 11.947 of 2009 marked its integration in the food supply for the National School Feeding Programme. Article 14 of aforementioned law highlights that a minimum of 30% (thirty percent) of the funds transferred by the National Development Fund Education (FNDE) to the Programme must be used for the purchase of food directly from family farmers or their organizations. The national school feeding policy under the responsibility of the FNDE and is subjected to agencies of internal control, such as the General Controllership of the Union (CGU), of external control, such as the Audit Courts of the Union and the of the states, and to the social control of the school feeding councils. Those funds are transferred to the implementing agencies, which are the education offices of the states, municipalities and of the Federal District. These entities must annually present their accountings to the School Feeding Councils, which analyze them and then issue a conclusive report to the FNDE, approving with or without reservations, or rejecting them. In this sense, this research aims to propose parameters that should contribute to the improvement of the social control over purchases from family farming for the National School Feeding Programme. The study was conducted by non parametric sampling alongside the managers of the implementing entities, school feeding councils and Family Farming Organizations all across Brazil, from the databases provided by FNDE and by the National Union of Cooperatives of Family Agriculture and Solidarity Economy (Unicafes). The study points out that the legal framework of PNAE seeks to ensure the participation of family farming in the food supply for the Programme, despite allowing the executing agencies to justify the non-compliance of the minimum required in a number of ways. The survey also signalizes that the school feeding councils follow the implementation of the Programme very shyly, and points out that there is room to expand and enhance the participation of these councils and organizations of family farming in the execution of PNAE. Its effectiveness requires a constant and effective process of training of the agents involved in the Programme.
Resumo:
Distributed generation systems must fulfill standards specifications of current harmonics injected to the grid. In order to satisfy these grid requirements, passive filters are connected between inverter and grid. This work compares the characteristic response of the traditional inductive (L) filter with the inductive-capacitive-inductive (LCL) filter. It is shown that increasing the inductance L leads to a good ripple current suppression around the inverter switching frequency. The LCL filter provides better harmonic attenuation and reduces the filter size. The main drawback is the LCL filter impedance, which is characterized by a typical resonance peak, which must be damped to avoid instability. Passive or active techniques can be used to damp the LCL resonance. To address this issue, this dissertation presents a comparison of current control for PV grid-tied inverters with L filter and LCL filter and also discuss the use of active and passive damping for different regions of resonance frequency. From the mathematical models, a design methodology of the controllers was developed and the dynamic behavior of the system operating in closed loop was investigated. To validate the studies developed during this work, experimental results are presented using a three-phase 5kW experimental platform. The main components and their functions are discussed in this work. Experimental results are given to support the theoretical analysis and to illustrate the performance of grid-connected PV inverter system. It is shown that the resonant frequency of the system, and sampling frequency can be associated in order to calculate a critical frequency, below which is essential to perform the damping of the LCL filter. Also, the experimental results show that the active buffer per virtual resistor, although with a simple development, is effective to damp the resonance of the LCL filter and allow the system to operate stable within predetermined parameters.
Resumo:
The insertion of distributed generation units in the electric power systems have contributed to the popularization of microgrid concepts. With the microgrids, several potential benefits can be achieved in regard to power quality and supply reliability. However, several technical challenges related to the control and operation of microgrids, which are associated with high insertion of generation systems based on static converters, must be overcame. Among the opportunities in the context of microgrids, there is the islanded operation of microgrids temporarily disconnected from the electric power systems and also the autonomous operation of geographically isolated microgrids. The frequency in large power systems is traditionally controlled by the generation units based on traditional synchronous generator. The insertion of distributed generation units based on static power converters may bring difficulties to the frequency control in microgrids, due to the reduction of the equivalent inertia of conventional synchronous generators present in islanded and isolated microgrids. In this context, it becomes necessary the proposition of new operational and control strategies for microgrids control, taking into account the presence of distributed generation units based on full-rated converter. This paper proposes an operational and control strategy for the islanded operation of a winddiesel microgrid with high insertion level of wind generation. The microgrid adopted in this study comprises of a wind energy conversion system with synchronous generator based on full rated converter, a diesel generator (DIG) and a dump load. Due to the high insertion level of wind generation, the wind unit operates in Vf mode and the diesel generator operates in PQ mode. The diesel generator and the dump load are used to regulate the DC-link voltage of the wind generation unit. The proposed control allows the islanded operation of the microgrid only with wind generation, wind-only mode (WO), and with wind-diesel generation, wind-diesel mode (WD). For the wind-only mode, with 100% of penetration level of wind generation, it is proposed a DC-link voltage control loop based on the use of a DC dump load. For the winddiesel mode, it is proposed a DC-link voltage control loop added to the diesel generator, which is connected to the AC side of the microgrid, in coordinated action with the dump load. The proposed operational and control strategy does not require the use of batteries and aims to maximize the energy production from wind generation, ensuring the uninterrupted operation of the microgrid. The results have showed that the operational and control strategy allowed the stable operation of the islanded microgrid and that the DC-link voltage control loop added to the diesel generator and the dump load proved to be effective during the typical variations of wind speed and load.
Resumo:
This study presents a proposal of speed servomechanisms without the use of mechanical sensors (sensorless) using induction motors. A comparison is performed and propose techniques for pet rotor speed, analyzing performance in different conditions of speed and load. For the determination of control technique, initially, is performed an analysis of the technical literature of the main control and speed estimation used, with their characteristics and limitations. The proposed technique for servo sensorless speed induction motor uses indirect field-oriented control (IFOC), composed of four controllers of the proportional-integral type (PI): rotor flux controller, speed controller and current controllers in the direct and quadrature shaft. As the main focus of the work is in the speed control loop was implemented in Matlab the recursive least squares algorithm (RLS) for identification of mechanical parameters, such as moment of inertia and friction coefficient. Thus, the speed of outer loop controller gains can be self adjusted to compensate for any changes in the mechanical parameters. For speed estimation techniques are analyzed: MRAS by rotóricos fluxes MRAS by counter EMF, MRAS by instantaneous reactive power, slip, locked loop phase (PLL) and sliding mode. A proposition of estimation in sliding mode based on speed, which is performed a change in rotor flux observer structure is displayed. To evaluate the techniques are performed theoretical analyzes in Matlab simulation environment and experimental platform in electrical machinery drives. The DSP TMS320F28069 was used for experimental implementation of speed estimation techniques and check the performance of the same in a wide speed range, including load insertion. From this analysis is carried out to implement closed-loop control of sensorless speed IFOC structure. The results demonstrated the real possibility of replacing mechanical sensors for estimation techniques proposed and analyzed. Among these, the estimator based on PLL demonstrated the best performance in various conditions, while the technique based on sliding mode has good capacity estimation in steady state and robustness to parametric variations.
Resumo:
Air pollution can threat the environment and public health, and is assess by pollutant ́s concentration measurements in order to verify whether the limits set by environmental agencies are being respected. However, these measures do not indicate immediately the impacts to living beings. To faced this problem, plants are been investigated as potential bioindicators of air pollution and, among them, stand out bromeliads Tillandsia genus which colonize various substrates,. obtaining water and nutrients from the atmosphere directly. In this context, this research assessed the potential of epiphytic bromeliad Tillandsia recurvata (L.) L. found in urbanized areas of the city of Curitiba - PR as a bioindicator of urban air pollution. According to vehicle traffic, five sample points were selected and classified. Points P1 and P2 were classified as high-traffic vehicle due presenting trucks and urban transport; point P3 was classified as moderate traffic due the predominance of private vehicles and urban transport; and points P4 and P5 were classified as low-traffic, presenting circulation of private vehicles only. There were analyzed the abundance of T. recurvata, morphophysiological parameters (leaf area, leaf specific area, sclerophylly index, percentage dry weight / fresh weight, chlorophyll (a + b), analysis of structural mesophyll organization) and the heavy metals accumulation (Fe, Cd, Cr, Cu, Pb and Zn). The abundance analysis and the results obtained for metals analysis were correlated with the intensity of vehicular traffic, directing the sampling points P1 > P2 = P3 > P4 = P5. This result demonstrate that the abundance of T. recurvata is greater in urban air pollution impacted areas, thus indicating that T. recurvata absorbs and accumulates metals and can be used in biomonitoring of urban air pollution in areas impacted by vehicular traffic. Morphophysiological parameters analyzed shows that the internal plant ́s structure is not significantly impacted by urban air pollution due plant ́s adptations. The presence of absorbing scales, the CAM metabolism pathway and it ́s store water ability, among other features, demonstrate their potential as bio-indicator in urban areas, especially regarding heavy metals accumulation .
Resumo:
Following a drop in estrogen in the period of menopause some women begin to lose bone mass more than 1% per year reaching the end of five years with loss greater than 25%. In this regard, factors such as older age, low calcium intake and premature menopause favor the onset of osteoporosis. Preventive methods such as nutritional counseling to a proper diet and the support of technology through applications that assess dietary intake are essential. Thus, this study aimed to develop an application for Android® platform focused on the evaluation of nutritional and organic conditions involved in bone health and risks for developing osteoporosis in postmenopausal women. To achieve this goal we proceeded to a study of 72 women aged 46-79 years, from the physical exercise for bone health of the Laboratory for Research in Biochemistry and Densitometry the Federal Technological University of Paraná program. Data were collected in the second half of 2014 through tests Bone Densitometry and Body Composition, Blood Tests, Anthropometric data and Nutrition Assessment. The study included women with a current diagnosis of osteopenia or osteoporosis primary, aged more than 45 years postmenopausal. For the assessment of bone mineral density and body composition used the device Absorptiometry Dual Energy X-ray (DXA) brand Hologic Discovery TM Model A. For anthropometric assessment was included to body mass, height, abdominal circumference, Waist circumference and hip circumference. The instrument for assessing food consumption was used Recall 24 hours a day (24HR). The estimated intake of energy and nutrients was carried from the tabulation of the food eaten in the Software Diet Pro 4®. In a sub sample of 30 women with osteopenia / osteoporosis serum calcium and alkaline phosphatase tests were performed. The results demonstrated a group of women (n = 30) average calcium intake of 570mg / day (± 340). The analysis showed a mean serum calcium within the normal range (10,20mg / dl ± 0.32) and average values and slightly increased alkaline phosphatase (105.40 U / L ± 23.70). Furthermore, there was a significant correlation between the consumption of protein and the optimal daily intake of calcium (0.375 p-value 0.05). Based on these findings, we developed an application early stage in Android® platform operating system Google®, being called OsteoNutri. We chose to use Java Eclipse® where it was executed Android® version of the project; choice of application icons and setting the visual editor for building the application layouts. The DroidDraw® was used for development of the three application GUIs. For practical tests we used a cell compatible with the version that was created (4.4 or higher). The prototype was developed in conjunction with the Group and Instrumentation Applications Development (GDAI) of the Federal Technological University of Paraná. So this application can be considered an important tool in dietary control, allowing closer control consumption of calcium and dietary proteins.
Resumo:
This research aims to reflect on the strategies and mediation used by Oscar Niemeyer and Museum of contemporary art, in Curitiba, and Pinacoteca and Museum of modern art of São Paulo, to approximate audience of art. Recognizes that the gap between the two and that is reflected in the low visitation to art museums is the result of social control technologies historically elaborate and maintained to keep track of who has economic power over others , are people , as in the case of artistic appreciation, or countries, such as what happens with technology.It also presents some possibilities of subversion of this control , which occur especially because the human being creative and interpretive. Finally, it notes that the work carried out by the educational sectors of museums to attract different audiences is very relevant institutions and committed. With regard to teaching materials prepared and distributed to visitors, however, the need for some adjustments so that they communicate better with visitors and contribute, in fact, to deconstruct the idea of the Museum as an elite space and available only to a few privileged.