Desempenho de sulcadores no desenvolvimento e produtividade da soja em solo submetido a diferentes níveis de compactação

On the national scene, soybean crop occupies a prominent position in cultivated area and volume production, being cultivated largely in the no tillage system. This system, due to the intense traffic of machines and implements on its surface has caused soil compaction problems, which has caused the yield loss of crops. In order to minimize this effect the seeder-drill uses the systems to opening the furrow by shank or the double disc type. The use of the shank has become commonplace for allowing the disruption of the compacted surface layer, however requires greater energy demand and may cause excessive tillage in areas where there is not observed high levels of compaction. Thus, this study aimed to evaluate the effects of furrowers mechanisms and levels of soil compacting on traction requirement by a seeder-drill and on the growing and productivity of soybean in an Oxisol texture clay, in a two growing seasons. The experimental design consisted of randomized blocks with split plots with the main plots composed of four levels of soil compaction (N0 – no tillage without additional compaction, N1, N2 and N3 – no tillage subjected to compaction through two, four and six passes with tractor, respectively) corresponding to densities of soil 1.16, 1.20, 1.22 and 1.26 g cm-3, and subplots by two furrowers mechanisms (shank and double disc) with four replicates. To evaluate the average, maximum and specific traction force requested by the seeder-drill, was used a load cell, with capacity of 50 kN and sensitivity of 2 mV V-1, coupled between the tractor and seeder-drill, whose data are stored in a datalogger system model CR800 of Campbell Scientific. In addition, were evaluated the bulk density, soil mechanical resistance to penetration, sowing depth, depth and groove width, soil area mobilized, emergence speed index, emergence operation, final plant stand, stem diameter, plant height, average number of seeds per pod, weight of 1,000 seeds, number of pods per plant and crop productivity. Data were subjected to analysis of variance, the mean of furrowers were compared by Tukey test (p≤0.05), while for the factor soil compaction, polynomial regression analysis was adopted, selected models by the criterion of greater R2 and significance (p≤0.05) of equation parameters. Regardless of the crop season, penetration resistance increase as soil compaction levels up to around 0.20 m deep, and bulk density influenced the sowing quality parameters, however, did not affect the crop yield. In the first season, there was a higher productivity with the use of the shank type. In the second crop season, the shank demanded greater energetic requirement with the increase of bulk density and opposite situation with the double disc. The locking of sowing lines allow better performance of the shank to break the compacted layer.

Efeitos diretos e indiretos de parâmetros dos semivariogramas referentes aos atributos químicos do solo sobre a produtividade de grãos de soja

In order to add value to soybens crops, and hence the marketing, medium and large producers have been using precision agriculture techniques (PA), as the Remote Sensing, Geographic Information Systems (GIS) and positioning satellite, to assist the management of crops. Thus, given the economic relevance of that culture to the southwest of Paraná State and Brazil, scientific studies to increase their productivity and profitability are of main importance. The objective of this study was to evaluate the correlation between the chemical soil properties and soybean yield for each estimated parameter of semivariogram (range, nugget and level effect), and the deployment of these correlations in direct and indirect effects, aiming to improve the mapping process of spatial variability of soil chemical properties for use in PA. The hypothesis is that not all attributes of soil used to estimate the semivariogram parameters has a direct effect on productivity, and that even in groups of plants within a larger area it is possible to estimate the parameters of the semivariograms. The experiment was conducted in a commercial area of 19.7 ha, located in the city of Pato Branco - PR, central geographic coordinates 26º 11 '35 "South, 52 43' 05" West longitude, and average altitude of 780 m. The area is planted with soybeans for over 30 years, currently being adopted to cultivate Brasmax Target RR - Don Mario 5.9i, with row spacing of 0.50 m and 13 plants m-1, totaling 260,000 plants ha-1. For georeferencing of the area of study and sampling points was used a couple of topographic ProMarkTM3 receptors, making a relative positioning to obtain the georeferenced coordinates. To collect data (chemical analyzes of soil and crop yield) were sampled 10 blocks in the experimental area, each with an area of 20 m2 (20 meters long x 1 meter wide) containing two spaced adjacent rows of 0.5 m. Each block was divided into 20 portions of 1 m2, and from each were collected four subsamples at a distance of 0.5 m in relation to the lines of blocks, making up a sample depth for 0-10 cm a sample to 10-20 cm for each plot, totaling 200 samples for each depth. The soybean crop was performed on the blocks depending on maturity, and in each block was considered a bundle at each meter. In the data analysis, it was performed a diagnosis of multicollinearity, and subsequently a path analysis of the main variables according to the explanatory variables (range of chemical attributes: pH, K, P, Ca, etc.). The results obtained by the path analysis of the parameters of the semivariogram of soil chemical properties, indicated that only the Fe, Mg, Mn, organic matter (OM), P and Saturation by bases (SB) exerted direct and indirect effects on soybean productivity, although they have not presented spatial variability, indicating that the distribution of blocks in the area was unable to identify the spatial dependence of these elements, making it impossible to draw up maps of the chemical attributes for use in PA.

Desempenho de fosfitos de potássio no manejo de mofo branco em soja

Soybean plays an important role in the Brazilian agriculture being one of the products most exported by the country. Its yield may be affected by diseases such as white mold, caused by the fungus Sclerotinia sclerotiorum Lib. de Bary, which, under favorable field conditions prevents the crop of expressing all its productive potential. The fungus is cosmopolitan and infects more than 400 species of plants. This disease is difficult to control, and the use of chemicals has not been sufficient to avoid significant losses, thus, this products are expensive and may cause environmental damage. Alternative methods, such as foliar fertilizers based on potassium phosphite, can also be used in the management of this disease. In this context, this work aimed to study different sources of potassium phosphite and its effects in the control of white mold in soybeans, as well as the time of application in culture, its action in inducing plants defense responses and/or its influence over the seeds quality. The effect of phosphites, over the pathogen, was evaluated in vitro, on mycelial inhibition, the mass of dry mycelium and germination of sclerotia. In all tests, the following phosphites were utilized: Phosphite A (P2O5-40%; K2O-20% - 1 L/ha); Phosphite B (P2O5-40%; K2O-28% - 1 L/ha); Phosphite C (P2O5-40%; K2O-20% - 1 L/ha) e Phosphite D (P2O5-30%; K2O-20% - 2,4 L/ha). At the induction of resistance tests were evaluated the synthesis of phytoalexin in soybean cotyledons and the enzymes FAL and POX evaluated in seedlings in growing chamber, sprayed with phosphites and the fungicide fluazinam. Field experiment was carried out at Coronel Domingos Soares-PR, in the 2012/2013 season, in an area with natural infestation of the pathogen. Soybean cultivar BMX Active was no-till seeded with 0,5m between rows. The experimental was laid out as a factorial 5 x 4 scheme (treatment x application time). Phosphites sources were used, as described above, and water was sprayed in the control treatment. Treatments were applied at four different growth stages: V4, V4 + R1, R1 and R2 at the rates recommended by the manufacturer. Soybean yield components and seeds and health and physiological quality were evaluated after harvesting. None of the tested phosphites affected mycelial growth and sclerotia germination or influenced phytoalexin synthesis. Phosphites C and D stood out due to an increasing in the phenylalanine ammonia-lyase activity 48 hours after its inoculation. These same products also induced the synthesis and peroxidases and phosphite C kept the levels of this enzyme elevated up to 72 hours after inoculation. At the field trials, phosphites C and D stood out in the control of white mold. There was no significant interaction of potassium phosphite on physiological and sanitary quality of the seeds.

Desempenho de sementes de soja revestidas com biopolímeros

The use of biopolymers that help to fix pesticides efficiently and degrade easily without harming the environment, and still improve the physiological performance of field soybean seed may bring contributions to the soybean yield. This study aimed to evaluate the effect of cassava starch polymers (AM), sodium alginate (ALG) and polyvinyl alcohol (PVOH), in the concentrations 2, 4 and 6 g / 100 ml of solution, in the physiological attributes of seeds soy, seed speed soaking and performance of soybean seeds after three months of storage. The soybean variety used was the NK 7059 RR. The experimental design used for the three studies was a factorial with 48 experimental units: 3 polymers (AM, ALG and PVOH), 4 different concentrations (0%, 2%, 4% and 6%), with four replications, in a completely randomized design. It was observed the level of significance of the factors and their interactions, applying the test F. The polymers were evaluated by the Tukey test at 5% probability, and the concentrations were evaluated by polynomial regression. The witness obtained better results for most variables studied. Among the polymers, the best coating was observed PVOH because it was the less viscous polymer and visually not served as a substrate for microorganisms. However, also, satisfactory results were obtained for the AM and ALG polymers at a concentration of 2%. There was not interference of the polymers studied with regard to reduction of imbibition rate of soybean seeds. The hydrophilicity of polymers, mainly the AM and ALG accelerated soaking seeds harming germination at concentrations 4% and 6%. In general, the higher the concentration of polymers tended to worse results.