Efeitos diretos e indiretos de parâmetros dos semivariogramas referentes aos atributos químicos do solo sobre a produtividade de grãos de soja

In order to add value to soybens crops, and hence the marketing, medium and large producers have been using precision agriculture techniques (PA), as the Remote Sensing, Geographic Information Systems (GIS) and positioning satellite, to assist the management of crops. Thus, given the economic relevance of that culture to the southwest of Paraná State and Brazil, scientific studies to increase their productivity and profitability are of main importance. The objective of this study was to evaluate the correlation between the chemical soil properties and soybean yield for each estimated parameter of semivariogram (range, nugget and level effect), and the deployment of these correlations in direct and indirect effects, aiming to improve the mapping process of spatial variability of soil chemical properties for use in PA. The hypothesis is that not all attributes of soil used to estimate the semivariogram parameters has a direct effect on productivity, and that even in groups of plants within a larger area it is possible to estimate the parameters of the semivariograms. The experiment was conducted in a commercial area of 19.7 ha, located in the city of Pato Branco - PR, central geographic coordinates 26º 11 '35 "South, 52 43' 05" West longitude, and average altitude of 780 m. The area is planted with soybeans for over 30 years, currently being adopted to cultivate Brasmax Target RR - Don Mario 5.9i, with row spacing of 0.50 m and 13 plants m-1, totaling 260,000 plants ha-1. For georeferencing of the area of study and sampling points was used a couple of topographic ProMarkTM3 receptors, making a relative positioning to obtain the georeferenced coordinates. To collect data (chemical analyzes of soil and crop yield) were sampled 10 blocks in the experimental area, each with an area of 20 m2 (20 meters long x 1 meter wide) containing two spaced adjacent rows of 0.5 m. Each block was divided into 20 portions of 1 m2, and from each were collected four subsamples at a distance of 0.5 m in relation to the lines of blocks, making up a sample depth for 0-10 cm a sample to 10-20 cm for each plot, totaling 200 samples for each depth. The soybean crop was performed on the blocks depending on maturity, and in each block was considered a bundle at each meter. In the data analysis, it was performed a diagnosis of multicollinearity, and subsequently a path analysis of the main variables according to the explanatory variables (range of chemical attributes: pH, K, P, Ca, etc.). The results obtained by the path analysis of the parameters of the semivariogram of soil chemical properties, indicated that only the Fe, Mg, Mn, organic matter (OM), P and Saturation by bases (SB) exerted direct and indirect effects on soybean productivity, although they have not presented spatial variability, indicating that the distribution of blocks in the area was unable to identify the spatial dependence of these elements, making it impossible to draw up maps of the chemical attributes for use in PA.

Adubação de sistemas: antecipação de adubação nitrogenada para a cultura do milho em integração lavoura-pecuária

Traditionally in no-tillage systems, fertilization is done to the catch crop. In general nutrient cycling in crop systems has not been treated as an important tool in the process of nutrient supplying for plants. The type and the condition in which vegetable residuesis decomposed can affect the efficiency of nutrient cycling.This study assessed the effect of anticipated nitrogen fertilization in crop-livestock systems on cultivated cornproduction, rate ofnutrient release from plant residue, and theN-minerallevels of soil. The study was carried out in the city Abelardo Luz (SC) in a Clayey Oxisol. The experimental design was a randomized block design with three replications. The treatments were arranged in a 2 x 2 factorial arrangement. The first factor was N Fertilization Time: in the N-Pasture level, nitrogen (200 kg ha-1 N) and N-Grains level, no nitrogen was applied. The second factor was the Grazing Height, characterized by two sward heights of oat at 15 cm (Low Height Pasture) and at 30 cm (High Height Pasture). Corn hybrid ‘Máximus’ was sowed in 10thOctober, 31 days after the removal of animals. In the twelve resulting plots from the combination of treatments on pasture phase (N Fertilization Time x Grazing Height) rates of N-fertilizer (0, 100, 200 e 300 Kg ha-1 of N) as urea were allocated in the split plot.We conclude that anticipated N fertilization of winter cover crop pasture to provide high-quality forage and carry-over N to the subsequent corn crop and may eventually replace side drees nitrogen fertilization on corn and can improve overall N fertilizer efficiency use in integrated crop-livestock systems.The rate of K release from plant residues is very fast, releasing large quantities in the first days after plant desiccation.Despite of considerably high nitrogen dose used in both the pasture and at the grain crop it was not observed nitrate leaching risks during the study period.

Sistemas de produção de milho sob adubação nitrogenada e plantas de cobertura do solo

The no-tillage system is the predominant model in the agricultural scenario of southern Brazil. Thus, the use of cover crops is significant due to the addition of biomass to protect the soil surface, and contribute to the cycling and/or fixing of nutrients, and in particular nitrogen (N) with liberation for the subsequent culture. Among the cool season species, it was found predominant use of oat to obtain straw to system. Though large quantities input of residue is not the preferred species to precede the corn, cereal with relevant importance in the Paraná Southwest region. It was aimed to evaluate the productivity capacity of corn in no-tillage, in the absence or presence of nitrogen fertilization, on waste of winter cover crops on soil and climatic conditions of the Paraná Southwest region. The installation of no-tillage was held in 2010 in the experimental area belonging to UTFPR, Campus Dois Vizinhos, on a Red Latosol. For the present study, we used data relating to three agricultural years (2012/2013, 2013/2014 and 2014/2015). The experimental design was randomized block design with split plots with three replications. The main plots consisted of systems composed by cover crops (black oat, ryegrass, rye, turnip, vetch, white lupine, aot+vetch consortium and oat+vetch+turnip), preceding corn. In the subplots were used two doses of nitrogen fertilization (0 and 180 kg ha N) coverage in maize.The biggest coverage rates occurred in the consortium with 95% at 62 days after sowing. The residual effect of 180 kg ha cool season plants following year. The residual effect of 180 kg ha systems, reduced in 21% the C/N ratio of poaceae. The common vetch accumulated 32 kg N per ton of MS added. The oat and rye keeps more than 50% waste to the land cover, after 120 days, while the ryegrass and vetch provide low soil protection. Consortium oat+vetch+turnip, vetch and white lupine, released the largest amounts of N, between 52 and 59 kg ha brassica and consortia positively influencing the diameter and length of cobs, number of kernels per row and, total number of grains per ear of corn, in the absence of mineral N. The weight of a thousand grains was increased by 12.4% by the addition of 180 kg ha increase in productivity of grain by the addition of 180 kg ha N, was 2.1 Mg ha 5.6 Mg ha 6.4 Mg ha components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha Keywords: Cover crops. No-tillage. Grain yield. Zea mays - 1 -1 N, increased 4.8% coverage rate in the of N in corn/cover crops -1 -1 . Fabaceae, -1 N mineral. The average N, in relation to dose 0 kg ha corn kernels on fabaceae, brassica and consortium oat+vetch+turnip, and poaceae the grains in succession. The consortium added amount between 4.0 the DM in the years of study. There was no effect of mineral N rate for corn yield components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha-1 N.

Caracterização fisio-molecular de cultivares de feijão (Phaseolus vulgaris L.) em resposta à deficiência hídrica

The identification of genotypes for drought tolerance has a great importance in breeding programs. The aim of this study was to characterize genotypes of beans in response to drought tolerance in different reproductive stages through physiologic, agronomic and molecular analysis. The experiment was conducted in greenhouse, using a randomized block design with four replicates; 10 cultivars: ANFC 9, ANFP 110, BRS Esplendor, BRSMG Realce, IPR Siriri, IPR Tangará, IPR Tuiuiu, IPR Uirapuru, IAC Imperador and IAC Milênio under two conditions of irrigation: plants irrigated during their entire life cycle, and plants under irrigation suppression in the reproductive stage (R7) until 16% of field capacity, when the irrigation was restored. In the last four days of stress, the gas exchanges were analyzed, and in the last day of stress was analyzed the percentage of closed stomata in the abaxial surface of the leaves, collected in different times of the day (9h, 12h, 15h and 18h). Additionally, plant samples were collected for the following analysis: fresh and dry mass of leaves, stems and legumes, and proline content in leaves and roots. The plants were harvested at the physiological maturity and the yield components and grain yield were determined. In addition, in order to identify polymorphisms in the sequences of promoters and genes related to drought, seven pairs of primers were tested on the group of genotypes. The drought susceptibility indexes (ISS) ranged from 0.65 to 1.10 in the group of genotypes, which the lowest values observed were for IAC Imperador (0.65) and BRS Esplendor (0.87), indicating the ability of these two genotypes to maintain grain yield under water stress condition. All genotypes showed reduction in yield components under water stress. IAC Imperador (43.4%) and BRS Esplendor (60.6%) had the lowest reductions in productivity and kept about 50% of the stomata closed during all the different times evaluated at last day of irrigation suppression. IAC Imperador showed greater water use efficiency and CO2 assimilation rate under drought stress. IPR Tuiuiú, IPR Tangará and IAC Imperador had the highest proline concentrations in the roots. Under water stress condition, there was a strong positive correlation (0.696) between the percentage of stomata closed with the number of grains per plant (0.696) and the fresh mass of leaves (0.731), the maximum percentage of stomata closed 73.71% in water stress. The accumulation of proline in the root was the character that most contributed to the divergence between the genotypes under water deficit, but not always the genotypes that have accumulated more proline were the most tolerant. The polymorphisms in DNA of coding and promoting sequences of transcription factors studied in this experiment did not discriminate tolerant genotypes from the sensitive ones to water stress.

Produtividade e qualidade de grãos de híbridos de canola cultivados em diferentes épocas no sudoeste do Paraná

Canola is the third most important oilseed in global agribusiness. Used in several market segments, its cultivation in Brazil began in the 70s The growth of canola cultivation aimed at producing beans intended for oil extraction can provide high economic efficiency of farms, the choice of the time correct for sowing is essential for this purpose is achieved. Objective of this study was to evaluate the performance of canola hybrids (Hyola 61, Hyola 76, Hyola 411, 433 and Hyola Hyola 571) evaluated in six sowing dates started on 09/03 (1 time) 06/04 (2 times ), 04/05 (3 times), 01/06 (4 times), 29/06 (5 times) and 26/07 (6 times). The experiments were conducted at the Experimental Station of the Federal Technological University of Paraná - UTFPR, Campus Dois Vizinhos. The field experiment was arranged in a randomized block design with split plots in three replications in two years (2013 and 2014 crop). Evaluated the agronomic characteristics as the number of days between emergence and flowering, number of days duration of flowering, number of days between emergency and physiological maturity, average plant height, plant lodging, grain yield, weight a thousand grains, crude protein content in grain and ether extract in the grains. There were significant differences between the effects of the six sowing dates in all variables, including hybrids and years. The study was able to show that it is possible to grow canola in the Southwest of Paraná. Being the first times more responsive sowing and Hyola 411 and Hyola 433 hybrid proved the most suitable among the variables observed.

Desempenho de sulcadores no desenvolvimento e produtividade da soja em solo submetido a diferentes níveis de compactação

On the national scene, soybean crop occupies a prominent position in cultivated area and volume production, being cultivated largely in the no tillage system. This system, due to the intense traffic of machines and implements on its surface has caused soil compaction problems, which has caused the yield loss of crops. In order to minimize this effect the seeder-drill uses the systems to opening the furrow by shank or the double disc type. The use of the shank has become commonplace for allowing the disruption of the compacted surface layer, however requires greater energy demand and may cause excessive tillage in areas where there is not observed high levels of compaction. Thus, this study aimed to evaluate the effects of furrowers mechanisms and levels of soil compacting on traction requirement by a seeder-drill and on the growing and productivity of soybean in an Oxisol texture clay, in a two growing seasons. The experimental design consisted of randomized blocks with split plots with the main plots composed of four levels of soil compaction (N0 – no tillage without additional compaction, N1, N2 and N3 – no tillage subjected to compaction through two, four and six passes with tractor, respectively) corresponding to densities of soil 1.16, 1.20, 1.22 and 1.26 g cm-3, and subplots by two furrowers mechanisms (shank and double disc) with four replicates. To evaluate the average, maximum and specific traction force requested by the seeder-drill, was used a load cell, with capacity of 50 kN and sensitivity of 2 mV V-1, coupled between the tractor and seeder-drill, whose data are stored in a datalogger system model CR800 of Campbell Scientific. In addition, were evaluated the bulk density, soil mechanical resistance to penetration, sowing depth, depth and groove width, soil area mobilized, emergence speed index, emergence operation, final plant stand, stem diameter, plant height, average number of seeds per pod, weight of 1,000 seeds, number of pods per plant and crop productivity. Data were subjected to analysis of variance, the mean of furrowers were compared by Tukey test (p≤0.05), while for the factor soil compaction, polynomial regression analysis was adopted, selected models by the criterion of greater R2 and significance (p≤0.05) of equation parameters. Regardless of the crop season, penetration resistance increase as soil compaction levels up to around 0.20 m deep, and bulk density influenced the sowing quality parameters, however, did not affect the crop yield. In the first season, there was a higher productivity with the use of the shank type. In the second crop season, the shank demanded greater energetic requirement with the increase of bulk density and opposite situation with the double disc. The locking of sowing lines allow better performance of the shank to break the compacted layer.