Caracterização da fração de óleo de café extraido de grãos sadios, verdes e preto-verdes, e a influência na adição deste na sensorial de café liofilizado

The application of roasted coffee oil directly on freeze dried soluble coffee is used to minimize the formation of fine poder which adhere on the glass packaging, which results in a negative visual appearance, as well as contributes to the aromatic impact when opening the packaging. The coffee oil is considered a high cost product obtained from Arabica coffee beans, previosly selected and roasted, by mechanical press. In Brazil the coffee culture and marketing results in the selection of the beans by type of defects and beverage, the volume of exportation works with types of coffee beans with low quantity of defects resulting in a large volume of defective coffee beans trading on the domestic market. Nevertheless, coffees which present defective grains like green, black-green beans present differences in the final flavor of the roasted coffees. The aim of this study was to evaluate the chemical composition of the oils extracted from grains classified as normal, green and black-green, at natural and roasted conditions. The oil was obtained by cold extraction using solvents of different polarities, and yield was calculated as well as its fatty acid composition. The oil of the roasted defective coffee grains was also used to prepare drinks of lyophilized soluble coffee in order to verify if jugdes were able to differenciate the sensory caracteristics of the beverages, in comparison to the product prepared using commercial oil obtained by mechanical pressing. Samples of oil obtained from defective grains showed similar extraction yields compared to hot extraction. Cromatographs of oils of the deffective grains did not showed differences compared to normal grains. In relation to the sensory analysis of the soluble coffee beverages, it was verified that when applying oils of light roasted black-green beans or oils of medium and dark roasted green beans obtained with rapid process, judges had more difficulties to distinguish differences between samples. Economic viability demonstrated that with the actual prices of the coffee beans, the use of defective beans could reduce in 64% the costs of the raw beans.

Características químicas do solo e desempenho de culturas após quatro anos de aplicações de cama de aviário em diferentes épocas e níveis

Due to the high supply and its attractive cost, the poultry litter has been used in the southwestern region of Parana to the improvement of soil fertility seeking greater production of grains and pastures. However, the use without technical knowledge can minimize the benefits of poultry litter or even cause undesirable effects on soil, environmental pollution and also productivity losses in the used crops. The objective of this study was to evaluate the influence of different times of poultry litter application, predating the winter crop, associated with increasing levels, about soil chemical properties, release of nutrients and crop performances in four consecutive years (2011-2014). In the first three years the experimental design was randomized blocks with a split plot system and four replications. In the main plots were tested four poultry litter application times preceding the wheat production: 0, 15, 30 and 45 days before sowing (DAS); in the subplots were applied four poultry litter levels (wet basis): 0, 4, 8 and 12 Mg ha-1. Last year one more subdivision of plots was done, evaluating the use or not of nitrogen in coverage in wheat, at a dose of 100 kg N ha-1. The wheat cultivar used in the four years was the BRS 220. In three years it was evaluated the residual effect on soybean production (cultivar - BMX Turbo RR) and in one year on the beans. The chemical soil attributes were evaluated at four depths 0-2,5cm, 2,5-5cm, 5-10cm and 10-20cm, and also the rate of decomposition and nutrient release of poultry litter and the crop productivity. The different times of application concerning the poultry litter had little influence on the studied variables, demonstrating that the producer does not need to have a specific date (before planting) to the application of poultry litter. Potassium was fully released 60 days after the allocation of litter bags into the field; for nitrogen and phosphorus the release was slower. The use of increasing levels of poultry litter increased the levels of various soil elements, highlighting the potassium which reached 20 cm deep in the second year of evaluation. The increase in pH and in the base saturation occurred only in the upper layers, while the phosphorus reached 10 cm deep in the third year of the study. It was observed increased pH and base saturation. The use of increasing doses of poultry litter contributed to the wheat plant nutrition, significantly increasing the weight of a thousand grains, and the grain yield of wheat in all the evaluated years; the nitrogen fertilization in coverage also had significant effect for the fourth evaluated year. Also there was a significant response from the residual effect of poultry litter for crops planted in summer for both soybeans and beans.

Material para construção civil a partir de lodo de estação de tratamento de água, lama de polimento de mármore e resíduo de produção de cal

The rapid population growth is the great motivator for the development of the construction industry and the increased demand for drinking water, resulting in a gradual increase in the generation of solid waste. Thus, this work was carried out in order to recycle industrial and municipal wastes incorporating them into materials for civil construction. The composite produced from water treatment sludge and marble polishing mud, applying lime production waste as a binder, was evaluated for its mechanical performance and its morphological structure. The raw materials were characterized for their chemical composition, mineralogy, morphology, particle size and also the moisture content. With the featured materials nine compositions have been developed varying the content of the water treatment sludge between 25 to 50%, marble polishing mud between 35 to 50% and the lime production waste between 10 to 30%. The composites were subjected to mechanical strength tests, water absorption, chemical and mineralogical composition and morphology. The developed materials presented, on the 3rd day of hydration, maximum strength value of 4.65 MPa, the 7th day 6.36 MPa, on the 14th day 6.74 MPa, the 28th day 5.98 MPa, on the 60th day 8.52 MPa at 90th day 11.75 MPa and 180th day 12.06 MPa. The water absorption values after 28 days of hydration ranged from 16.27% to 26.32% and after 90 days, from 13.57% to 23.56%.

Efeitos diretos e indiretos de parâmetros dos semivariogramas referentes aos atributos químicos do solo sobre a produtividade de grãos de soja

In order to add value to soybens crops, and hence the marketing, medium and large producers have been using precision agriculture techniques (PA), as the Remote Sensing, Geographic Information Systems (GIS) and positioning satellite, to assist the management of crops. Thus, given the economic relevance of that culture to the southwest of Paraná State and Brazil, scientific studies to increase their productivity and profitability are of main importance. The objective of this study was to evaluate the correlation between the chemical soil properties and soybean yield for each estimated parameter of semivariogram (range, nugget and level effect), and the deployment of these correlations in direct and indirect effects, aiming to improve the mapping process of spatial variability of soil chemical properties for use in PA. The hypothesis is that not all attributes of soil used to estimate the semivariogram parameters has a direct effect on productivity, and that even in groups of plants within a larger area it is possible to estimate the parameters of the semivariograms. The experiment was conducted in a commercial area of 19.7 ha, located in the city of Pato Branco - PR, central geographic coordinates 26º 11 '35 "South, 52 43' 05" West longitude, and average altitude of 780 m. The area is planted with soybeans for over 30 years, currently being adopted to cultivate Brasmax Target RR - Don Mario 5.9i, with row spacing of 0.50 m and 13 plants m-1, totaling 260,000 plants ha-1. For georeferencing of the area of study and sampling points was used a couple of topographic ProMarkTM3 receptors, making a relative positioning to obtain the georeferenced coordinates. To collect data (chemical analyzes of soil and crop yield) were sampled 10 blocks in the experimental area, each with an area of 20 m2 (20 meters long x 1 meter wide) containing two spaced adjacent rows of 0.5 m. Each block was divided into 20 portions of 1 m2, and from each were collected four subsamples at a distance of 0.5 m in relation to the lines of blocks, making up a sample depth for 0-10 cm a sample to 10-20 cm for each plot, totaling 200 samples for each depth. The soybean crop was performed on the blocks depending on maturity, and in each block was considered a bundle at each meter. In the data analysis, it was performed a diagnosis of multicollinearity, and subsequently a path analysis of the main variables according to the explanatory variables (range of chemical attributes: pH, K, P, Ca, etc.). The results obtained by the path analysis of the parameters of the semivariogram of soil chemical properties, indicated that only the Fe, Mg, Mn, organic matter (OM), P and Saturation by bases (SB) exerted direct and indirect effects on soybean productivity, although they have not presented spatial variability, indicating that the distribution of blocks in the area was unable to identify the spatial dependence of these elements, making it impossible to draw up maps of the chemical attributes for use in PA.

Desempenho de soja associado à posição do fertilizante e tamanho de sementes

The seed size used for seeding has caused doubts among soybean producers. The study aimed to determine whether there may be differences between seed size with respect to depth of fertilizer deposition. The field experiment was conducted at the Experimental Area UTFPR Campus Pato Branco, using a precision seeder for direct seeding. The design was a randomized blocks, with five repetitions. The treatments were composed by the combination of two seed sizes (large seed with 6,5 mm and 5,5 mm with small seed) and two fertilizer deposition depths in relation to the seed (fertilizer near the seed with about 3 cm away and fertilizer distant from the seeds with about 10 cm). Data were subjected to analysis of variance. When the test value F was significant at 5% probability was applied to the Duncan test for comparison of means. The shallower depth of fertilizer deposition provided larger number of pods per plant and increased number of grains per plant. Already the largest depth of fertilizer deposition provided greater plant height at 30 days after sowing and R2 stage, greater ground area mobilized, higher plant population in all periods, greater depth of deposition of seeds and a higher rate of emergency speed.

Análise de aspectos sociocientíficos em questões de química do Enem: subsídio para a elaboração de material didático para a formação cidadã

Acompanha: Manual didático: o emprego de aspectos sociocientíficos no ensino de química