Ciências florestais e biológicas (CIFLORBIO)

This book is a final product of teachers initiative of the Federal University of Technology - Paraná, Brazil, to increase information about forestry and biological sciences, produced by researchers from different and valuable institutions of the country. It is organized in five chapters, and the first is concerned with nutrient cycling through litter in natural ecosystems in Brazil. The second text is about the negative effects on soil properties in areas of natural trails. The third is about the forest extraction as means of reducing social and environmental vulnerability. Also in the line of research on soil, the fourth chapter discusses the physical attributes in a forest plantation. Last but not least, the fifth paper presents geostatistics applied to the characterization of forests.

Adubação de sistemas: antecipação de adubação nitrogenada para a cultura do milho em integração lavoura-pecuária

Traditionally in no-tillage systems, fertilization is done to the catch crop. In general nutrient cycling in crop systems has not been treated as an important tool in the process of nutrient supplying for plants. The type and the condition in which vegetable residuesis decomposed can affect the efficiency of nutrient cycling.This study assessed the effect of anticipated nitrogen fertilization in crop-livestock systems on cultivated cornproduction, rate ofnutrient release from plant residue, and theN-minerallevels of soil. The study was carried out in the city Abelardo Luz (SC) in a Clayey Oxisol. The experimental design was a randomized block design with three replications. The treatments were arranged in a 2 x 2 factorial arrangement. The first factor was N Fertilization Time: in the N-Pasture level, nitrogen (200 kg ha-1 N) and N-Grains level, no nitrogen was applied. The second factor was the Grazing Height, characterized by two sward heights of oat at 15 cm (Low Height Pasture) and at 30 cm (High Height Pasture). Corn hybrid ‘Máximus’ was sowed in 10thOctober, 31 days after the removal of animals. In the twelve resulting plots from the combination of treatments on pasture phase (N Fertilization Time x Grazing Height) rates of N-fertilizer (0, 100, 200 e 300 Kg ha-1 of N) as urea were allocated in the split plot.We conclude that anticipated N fertilization of winter cover crop pasture to provide high-quality forage and carry-over N to the subsequent corn crop and may eventually replace side drees nitrogen fertilization on corn and can improve overall N fertilizer efficiency use in integrated crop-livestock systems.The rate of K release from plant residues is very fast, releasing large quantities in the first days after plant desiccation.Despite of considerably high nitrogen dose used in both the pasture and at the grain crop it was not observed nitrate leaching risks during the study period.

Sistemas de produção de milho sob adubação nitrogenada e plantas de cobertura do solo

The no-tillage system is the predominant model in the agricultural scenario of southern Brazil. Thus, the use of cover crops is significant due to the addition of biomass to protect the soil surface, and contribute to the cycling and/or fixing of nutrients, and in particular nitrogen (N) with liberation for the subsequent culture. Among the cool season species, it was found predominant use of oat to obtain straw to system. Though large quantities input of residue is not the preferred species to precede the corn, cereal with relevant importance in the Paraná Southwest region. It was aimed to evaluate the productivity capacity of corn in no-tillage, in the absence or presence of nitrogen fertilization, on waste of winter cover crops on soil and climatic conditions of the Paraná Southwest region. The installation of no-tillage was held in 2010 in the experimental area belonging to UTFPR, Campus Dois Vizinhos, on a Red Latosol. For the present study, we used data relating to three agricultural years (2012/2013, 2013/2014 and 2014/2015). The experimental design was randomized block design with split plots with three replications. The main plots consisted of systems composed by cover crops (black oat, ryegrass, rye, turnip, vetch, white lupine, aot+vetch consortium and oat+vetch+turnip), preceding corn. In the subplots were used two doses of nitrogen fertilization (0 and 180 kg ha N) coverage in maize.The biggest coverage rates occurred in the consortium with 95% at 62 days after sowing. The residual effect of 180 kg ha cool season plants following year. The residual effect of 180 kg ha systems, reduced in 21% the C/N ratio of poaceae. The common vetch accumulated 32 kg N per ton of MS added. The oat and rye keeps more than 50% waste to the land cover, after 120 days, while the ryegrass and vetch provide low soil protection. Consortium oat+vetch+turnip, vetch and white lupine, released the largest amounts of N, between 52 and 59 kg ha brassica and consortia positively influencing the diameter and length of cobs, number of kernels per row and, total number of grains per ear of corn, in the absence of mineral N. The weight of a thousand grains was increased by 12.4% by the addition of 180 kg ha increase in productivity of grain by the addition of 180 kg ha N, was 2.1 Mg ha 5.6 Mg ha 6.4 Mg ha components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha Keywords: Cover crops. No-tillage. Grain yield. Zea mays - 1 -1 N, increased 4.8% coverage rate in the of N in corn/cover crops -1 -1 . Fabaceae, -1 N mineral. The average N, in relation to dose 0 kg ha corn kernels on fabaceae, brassica and consortium oat+vetch+turnip, and poaceae the grains in succession. The consortium added amount between 4.0 the DM in the years of study. There was no effect of mineral N rate for corn yield components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha-1 N.

Altura do pasto e adubação nitrogenada sobre a produção de forragem e eficiência no uso de nutrientes em sistema de integração lavoura-pecuária

The proper use of management strategies, such as grazing intensity and nitrogen fertilization are primordial to the success of integrated crop-livestock system. Several studies have demonstrated the influence of grazing intensity and nitrogen fertilization on dynamics of forage production and nutrient cycling. However, most this researches studying these strategies in isolation and little is known about the interaction of these factors in the management of an integrated crop-livestock system. In this context, the aim of this study is to determine the best management strategy involving sward height and nitrogen fertilization, permitting greater forage production and improved efficiency in the use of nitrogen soil by a black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture in integrated crop-livestock system. The experiment was realized in Abelardo Luz – SC, in an area of 14 ha, where has been conducted an experiment in long term with integrated crop-livestock system under no-tillage since 2012. The experimental design is a randomized block design with three replications in a factorial design (2x2), the first factor was the grazing intensity (high and low), characterized by two sward height management (10 and 25 cm), and the second included the time factor application of N in the system: N applied on pasture (N-pasture) and N applied on the culture of grain (N-grain), at dose of 200 kg N ha stocking and variable stocking rate. The previous crop to pasture was corn. The nitrogen fertilization of pasture increased tiller density, forage density, participation of ryegrass ‘Barjumbo’ and percentage of ryegrass leaves in forage mass. Forage mass was less at low sward height on average, however the percentage of ryegrass ‘Barjumbo’ and rye leaves was greater and dead material was lower in this treatment. With nitrogen fertilization of pasture it was possible to double the amount of forage accumulated in periods with further development of ryegrass, furthermore, the total production of DM was increased in 38.4% and the shoot N concentration in 28.6%. When the nitrogen fertilization is applied in pasture, it is possible to keep black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture with an average sward height of 11 cm. The residual effect of N applied at corn was not sufficient to meet the nutritional needs of pasture and the forage production was affected by periods with N deficiency, while a single application of 200 kg N ha was sufficient to meet the N requirements throughout the forage accumulation period. The black oat ‘BRS 139’ plus ryegrass ‘Barjumbo’ pasture is efficient in use and recovery of the nitrogen applied in both treatments of sward height.

Aplicação da metodologia numérica “fast bounds crack” para uma estimativa eficiente da evolução do tamanho de trinca

A significant part of the life of a mechanical component occurs, the crack propagation stage in fatigue. Currently, it is had several mathematical models to describe the crack growth behavior. These models are classified into two categories in terms of stress range amplitude: constant and variable. In general, these propagation models are formulated as an initial value problem, and from this, the evolution curve of the crack is obtained by applying a numerical method. This dissertation presented the application of the methodology "Fast Bounds Crack" for the establishment of upper and lower bounds functions for model evolution of crack size. The performance of this methodology was evaluated by the relative deviation and computational times, in relation to approximate numerical solutions obtained by the Runge-Kutta method of 4th explicit order (RK4). Has been reached a maximum relative deviation of 5.92% and the computational time was, for examples solved, 130,000 times more higher than achieved by the method RK4. Was performed yet an Engineering application in order to obtain an approximate numerical solution, from the arithmetic mean of the upper and lower bounds obtained in the methodology applied in this work, when you don’t know the law of evolution. The maximum relative error found in this application was 2.08% which proves the efficiency of the methodology "Fast Bounds Crack".

Caracterização elementar de ligas metálicas em implantes dentários

An ideal biomaterial for dental implants must have very high biocompatibility, which means that such materials should not provoke any serious adverse tissue response. Also, used metal alloys must have high fatigue resistance due the masticatory force and good corrosion resistance. These properties are rendered by using alpha and beta stabilizers, such as Al, V, Ni, Fe, Cr, Cu, Zn. Commercially pure titanium (TiCP) is used often for dental and orthopedic implants manufacturing. However, sometimes other alloys are employed and consequently it is essential to research the chemical elements present in those alloys that could bring prejudice for the health. Present work investigated TiCP metal alloys used for dental implant manufacturing and evaluated the presence of stabilizing elements within existing limits and standards for such materials. For alloy characterization and identification of stabilizing elements it was used EDXRF technique. This method allows to perform qualitative and quantitative analysis of the materials using the spectra of the characteristic X-rays emitted by the elements present in the metal samples. The experimental setup was based on two X- rays tubes (AMPTEK Mini X model with Ag and Au targets), a X-123SDD detector (AMPTEK) and a 0.5mm Cu collimator, developed due to the sample characteristics. The other experimental setup used as a complementary technique is composed of an X-ray tube with a Mo target, collimator 0.65mm and XFlash (SDD) detector - ARTAX 200 (BRUKER). Other method for elemental characterization by energy dispersive spectroscopy (EDS) applied in present work was based on Scanning Electron Microscopy (SEM) EVO® (Zeeis). This method also was used to evaluate the surface microstructure of the sample. The percentual of Ti obtained in the elementary characterization was among 93.35 ± 0.17% and 95.34 ± 0.19 %. These values are considered below the reference limit of 98.635% to 99.5% for TiCP, established by Association of metals centric materials engineers and scientists Society (ASM). The presence of elements Al and V in all samples also contributed to underpin the fact that are not TiCP implants. The values for Al vary between 6.3 ± 1.3% and 3.7 ± 2.0% and for V, between 0.26 ± 0.09% and 0.112 ± 0.048%. According to the American Society for Testing and Materials (ASTM), these elements should not be present in TiCP and in accordance with the National Institute of Standards and Technology (NIST), the presence of Al should be <0.01% and V should be of 0.009 ± 0.001%. Obtained results showed that implant materials are not exactly TiCP but, were manufactured using Ti-Al-V alloy, which contained Fe, Ni, Cu and Zn. The quantitative analysis and elementary characterization of experimental results shows that the best accuracy and precision were reached with X-Ray tube with Au target and collimator of 0.5 mm. Use of technique of EDS confirmed the results of EDXRF for Ti-Al-V alloy. Evaluating the surface microstructure by SEM of the implants, it was possible to infer that ten of the thirteen studied samples are contemporaneous, rough surface and three with machined surface.