3 resultados para Combinação de Tripla Frequência
em Repositório Institucional da Universidade Tecnológica Federal do Paraná (RIUT)
Resumo:
The peaches and nectarines are highly appreciated by consumer, but it is climacteric fruits, with availability in the market in small time. It is necessary to invest to obtain genotypes with fruit quality and small perishability or that it presente less physiological disorders after storage. The aims of this work were i) to evaluate the genetic divergence among 40 peach and nectarine trees genotypes based on postharvest quality and select posible parents; ii) to evaluate the susceptibility to chilling injury in peaches and nectarines after cold storage; iii) to evaluate divergence of peaches and nectarines on the basis in the susceptibility for chiling injury and select superior genotypes; iv) evaluate the correlations between quality and susceptibility to chilling injury of peaches and nectarines v) select parents with the combination of lower susceptibility to chilling injury and higher quality fruit. The study was carried out in EEAD-CSIC, Zaragoza - Spain, during the production cycle 2013/2014. A total of 40 peaches and nectarines genotypes from germplasm collection were evaluated. The quality characteristics as flesh firmness, total soluble solids, titratable acidity, pH, rippining index and flesh color parameters were evaluated. The fruits were submitted to cold storage at 0 °C and 5 °C, with 95% average relative humidity. The evaluations were after 14 and 28 days, it being observed the presence of symptoms, such as wooliness through mealiness, flesh grainy, leatheriness and flesh color changes, through browning, bleeding and off flavor. As a selection parameter was adopted 20% of genotypes that had a higher frequency of superiority for quality characteristics, susceptibility to chilling injury and the combining of both. For quality characteristic presented greater divergence the ‘Queen Giant’, ‘Sudanel Blanco’ and ‘Borracho de Jarque’. Based on the quality the eight genotypes were selected, ‘Andross’, ‘San Jaime’, ‘San Lorenzo’, ‘Borracho de Jarque’, ‘Sudanell 1’, ‘Carson’, ‘Baby Gold 6’ and ‘Stanford’. All genotypes studied exhibited susceptibility to one or more symptoms caused by cold storage during 28 days, independent of temperature. For 14 days, the ‘Baby Gold 6’, ‘Flavortop’ and ‘Queen Giant’ genotypes did not show any physiological disorder caused by cold. In general, the temperature of 0 °C favored fruit postharvest conservation, it have a lower incidence and severity of symptoms caused by cold storage. The storage for 14 days contributed for the lower incidence of damage in the genotypes fruits studied. For 14 days, with both temperatures, it was observed divergence for ‘Queen Giant’, ‘Sudanell Blanco’, ‘Baby Gold 6’ ‘GF3’, ‘Baby Gold 8’, ‘Campiel’ and ‘Campiel Rojo’ genotypes. For 28 days, in the 5 °C condition, ‘Queen Giant’, ‘Big Top’, ‘Flavortop’ and ‘Redhaven’ genotypes were divergents. Based on susceptibility to chilling injury at 0 °C, the eight genotypes were selected, it being these, ‘Queen Giant’, ‘Keimoes’, ‘Flavortop’, ‘Big Top’, 'Redhaven', 'Sudanell 3', 'Bonet I' and ‘Carson’. The quality parameters as rippining index, soluble solids, firmness and titratable acidity presented correlation among them. These, also it had correlation with woolines and bowning, what it indicate that fruits with more ripening can have this symptoms more easily. The browning, mealiness, flesh grainy and off flavor variables were correlationed with the time period and temperartures, what it confirm that these symptoms are the main disorders caused by cold storage. The quality characteristics together susceptibility to chilling injury allowed selected ‘Baby Gold 6’, ‘Sarell’, ‘Keimoes’, ‘GF3’ ‘San Jaime’, ‘Big Top’, ‘Sudanell 1’, ‘Carson’, ‘Baby Gold 8’, and ‘San Lorenzo’ genotypes.
Resumo:
This work presents the development and modification of techniques to reduce the effects of load variation and mains frequency deviation in repetitive controllers applied to active power filters. To minimize the effects of aperiodic signals resulting from the connection or disconnection of non-linear loads is developed a technique which recognizes linear and nonlinear loads, and operates to reset the controller only when the error due to the transition of considerable value, and the transition is from non-linear to linear load. An algorithm to adapt the gain of the repetitive controller, based on a sigmoid function adaptation, in order to minimize the effects caused by random noise in the measurement system is also used. This work also analyzes the effects of frequency variation and presents the main methods to cope with this situation. Some solutions are the change in the number of samples per period and the variation of the sampling rate. The first has the advantage of using linear design techniques and results in a time invariant system. The second method changes the sampling frequency and leads to a time variant system that demands a difficult analysis of stability. The proposed algorithms were tested using the methods of truncation of the number of samples and the method of changing the sampling rate of the system to compensate possible frequency variations of the grid. Experimental results are presented to validate the proposal.
Resumo:
This thesis aims to investigate the interaction of acoustic waves and fiber Bragg gratings (FBGs) in standard and suspended-core fibers (SCFs), to evaluate the influence of the fiber, grating and modulator design on the increase of the modulation efficiency, bandwidth and frequency. Initially, the frequency response and the resonant acoustic modes of a low frequency acousto-optic modulator (f < 1.2 MHz) are numerically investigated by using the finite element method. Later, the interaction of longitudinal acoustic waves and FBGs in SCFs is also numerically investigated. The fiber geometric parameters are varied and the strain and grating properties are simulated by means of the finite element method and the transfer matrix method. The study indicates that the air holes composing the SCF cause a significant reduction of the amount of silica in the fiber cross section increasing acousto-optic interaction in the core. Experimental modulation of the reflectivity of FBGs inscribed in two distinct SCFs indicates evidences of this increased interaction. Besides, a method to acoustically induce a dynamic phase-shift in a chirped FBG employing an optimized design of modulator is shown. Afterwards, a combination of this modulator and a FBG inscribed in a three air holes SCF is applied to mode-lock an ytterbium doped fiber laser. To improve the modulator design for future applications, two other distinct devices are investigated to increase the acousto-optic interaction, bandwidth and frequency (f > 10 MHz). A high reflectivity modulation has been achieved for a modulator based on a tapered fiber. Moreover, an increased modulated bandwidth (320 pm) has been obtained for a modulator based on interaction of a radial long period grating (RLPG) and a FBG inscribed in a standard fiber. In summary, the results show a considerable reduction of the grating/fiber length and the modulator size, indicating possibilities for compact and faster acousto-optic fiber devices. Additionally, the increased interaction efficiency, modulated bandwidth and frequency can be useful to shorten the pulse width of future all-fiber mode-locked fiber lasers, as well, to other photonic devices which require the control of the light in optical fibers by electrically tunable acoustic waves.