Silagem do bagaço de sorgo sacarino

Brazilian sweet sorghum is used to generate ethanol and the bagasse is burned in industrial boilers or deposited on soil polluting the environment. This study evaluated the performance of sorghum plants and its bagasse silage nutritional value aiming to use it in the ruminant nutrition. Experiments were set up on the UTFPR campus at Dois Vizinhos-PR. The first trial was established on October 2nd, 2012 using the genotypes ADV 2010, Hunnigreen, Sugargraze, Volumax, BR 505, 503, 501 and the second trial at 2013 on November 27th assessing the materials ADV 2010, Sugargraze, Hunnigreen, EX 5110, BR 506, 508, 509 and 511. Experimental was laid out as a randomized block design with three replications. Results were analyzed through ANOVA comparing the averages by Duncan test at 5% error probability. As field variables were evaluated: plant height (Pl hei), green mass production (GM Prod), percentage of leaves, stems and panicles in relation to the plant, stems production without straw (Prod stems with straw), whole stems production (Who stems Prod), stem diameter (Stem diam), juice production (Juice prod) and Brix degree (oBrix). After juice plant extraction, forage bagasse was crushed and packed in silos for 60 days and green matter yield was estimated (GM). In bagasse silage gauged to buffer capacity (BC), dry matter (DM), mineral matter (MM), crude protein (CP), ether extract (EE), total carbohydrates (TC), non-fibrous carbohydrates (NFCH), neutral detergent fiber (NDF), acid detergent fiber (ADF), lignin (LIG ) and digestibility "in vitro" (DIGIV). There was no significant difference (P> 0.05) between genotypes regarding to green matter production and on average, the second crop yield was lower and reflected in the reduction of bagasse production. Bagasse silage DM was of 32.3% and 33.1%; NDF 73% and 65.8%, crude protein 3.8% and 5.9; pH 3.7 and 3.7; TC and 9.8 and 10.7. mg MS-1; the amount of NFCH was 11.1 and 13.5%; DIG of DM 36.9 and 62.4% for the respectively to the bagasse produced from materials grown in the 2012/2013 and 2013/2014 seasons. Hybrid genotypes had a better agronomic performance while the varieties were more efficient in bromatological indexes. And despite the high percentage of NDF and the low protein level, it is possible to feed ruminants with this coproduct.

Sistemas de produção de milho sob adubação nitrogenada e plantas de cobertura do solo

The no-tillage system is the predominant model in the agricultural scenario of southern Brazil. Thus, the use of cover crops is significant due to the addition of biomass to protect the soil surface, and contribute to the cycling and/or fixing of nutrients, and in particular nitrogen (N) with liberation for the subsequent culture. Among the cool season species, it was found predominant use of oat to obtain straw to system. Though large quantities input of residue is not the preferred species to precede the corn, cereal with relevant importance in the Paraná Southwest region. It was aimed to evaluate the productivity capacity of corn in no-tillage, in the absence or presence of nitrogen fertilization, on waste of winter cover crops on soil and climatic conditions of the Paraná Southwest region. The installation of no-tillage was held in 2010 in the experimental area belonging to UTFPR, Campus Dois Vizinhos, on a Red Latosol. For the present study, we used data relating to three agricultural years (2012/2013, 2013/2014 and 2014/2015). The experimental design was randomized block design with split plots with three replications. The main plots consisted of systems composed by cover crops (black oat, ryegrass, rye, turnip, vetch, white lupine, aot+vetch consortium and oat+vetch+turnip), preceding corn. In the subplots were used two doses of nitrogen fertilization (0 and 180 kg ha N) coverage in maize.The biggest coverage rates occurred in the consortium with 95% at 62 days after sowing. The residual effect of 180 kg ha cool season plants following year. The residual effect of 180 kg ha systems, reduced in 21% the C/N ratio of poaceae. The common vetch accumulated 32 kg N per ton of MS added. The oat and rye keeps more than 50% waste to the land cover, after 120 days, while the ryegrass and vetch provide low soil protection. Consortium oat+vetch+turnip, vetch and white lupine, released the largest amounts of N, between 52 and 59 kg ha brassica and consortia positively influencing the diameter and length of cobs, number of kernels per row and, total number of grains per ear of corn, in the absence of mineral N. The weight of a thousand grains was increased by 12.4% by the addition of 180 kg ha increase in productivity of grain by the addition of 180 kg ha N, was 2.1 Mg ha 5.6 Mg ha 6.4 Mg ha components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha Keywords: Cover crops. No-tillage. Grain yield. Zea mays - 1 -1 N, increased 4.8% coverage rate in the of N in corn/cover crops -1 -1 . Fabaceae, -1 N mineral. The average N, in relation to dose 0 kg ha corn kernels on fabaceae, brassica and consortium oat+vetch+turnip, and poaceae the grains in succession. The consortium added amount between 4.0 the DM in the years of study. There was no effect of mineral N rate for corn yield components when cultivated on vetch. Systems containing fabaceae, brassica and consortium oat+vetch+turnip, predating the corn, in the absence of mineral N, provided similar grain yelds inrelation to the systems with the addition of 180 kg ha-1 N.

Efeitos da adição da cal hidratada na estabilização de um solo sedimentar para pavimentação urbana na região de Curitiba

Urban paving is of paramount importance for a city, both socioeconomic and in quality of life. The urban flooring not different so-called road surface are constituted by a set of horizontal layers, overlaid on the ground, which have the main function of supporting the actions induced by the vehicle redistributing the stresses transmitted to the ground. Soils are important materials for the execution of paving, mainly because they are part of the basic structure of the floor and mostly be available in abundance, with a very low cost, however, their properties usually do not meet the requirements necessary to perform the floor. The soil stabilization for the implementation of urban pavement bases and sub-bases is an increasingly important aspect in the current situation, because always there is the concern with the environment, and there is now the clear awareness that every effort should be made to minimize the effects caused by the exploitation of deposits and deposition of material. In this sense this work presents the effects of adding different proportions of lime to stabilize a sedimentary soil sample from the urban area of the city of Curitiba. It selected a sample quantity of soil in the region to study the stabilization insertion of hydrated lime type (CHIII) powder. The two variables in the study are related to the content of lime mixed with the soil at 0% percentages of 3%, 6%, 8% and 16%, and cure times at which these mixtures were subjected to (0, 7, 14, 28 and 56 days). The tested mixtures were prepared from dosages defined by two methods: one checking the chemical behavior of the samples by means of changes in pH values, and the second analyzing the mechanical behavior through the RCS values. It has been found that the chemical stability analyzed by addition of lime, provided an average increase of RCS in most soil samples studied, because of some physical and chemical characteristics thereof. For mixtures with 6%, 8% and 16% of lime after 28 days of curing, the average RCS was 0,57 MPa, 1,06 MPa and 2,37 MPa, respectively, for the normal proctor, and as for intermediate proctor, in the same curing time and on the same percentages RCS results were 0,54 MPa, 1,04 MPa and 2,71 MPa, respectively. In global terms, the soil-lime mixtures studied showed acceptable behavior by law to use as layers of sub-base. However, only the mixture with 16% of lime, at 28 days, is recommended for use on floors bases. Even so, the mixtures studied constitute a good alternative economic and socio-environmental.