Silagem do bagaço de sorgo sacarino

Brazilian sweet sorghum is used to generate ethanol and the bagasse is burned in industrial boilers or deposited on soil polluting the environment. This study evaluated the performance of sorghum plants and its bagasse silage nutritional value aiming to use it in the ruminant nutrition. Experiments were set up on the UTFPR campus at Dois Vizinhos-PR. The first trial was established on October 2nd, 2012 using the genotypes ADV 2010, Hunnigreen, Sugargraze, Volumax, BR 505, 503, 501 and the second trial at 2013 on November 27th assessing the materials ADV 2010, Sugargraze, Hunnigreen, EX 5110, BR 506, 508, 509 and 511. Experimental was laid out as a randomized block design with three replications. Results were analyzed through ANOVA comparing the averages by Duncan test at 5% error probability. As field variables were evaluated: plant height (Pl hei), green mass production (GM Prod), percentage of leaves, stems and panicles in relation to the plant, stems production without straw (Prod stems with straw), whole stems production (Who stems Prod), stem diameter (Stem diam), juice production (Juice prod) and Brix degree (oBrix). After juice plant extraction, forage bagasse was crushed and packed in silos for 60 days and green matter yield was estimated (GM). In bagasse silage gauged to buffer capacity (BC), dry matter (DM), mineral matter (MM), crude protein (CP), ether extract (EE), total carbohydrates (TC), non-fibrous carbohydrates (NFCH), neutral detergent fiber (NDF), acid detergent fiber (ADF), lignin (LIG ) and digestibility "in vitro" (DIGIV). There was no significant difference (P> 0.05) between genotypes regarding to green matter production and on average, the second crop yield was lower and reflected in the reduction of bagasse production. Bagasse silage DM was of 32.3% and 33.1%; NDF 73% and 65.8%, crude protein 3.8% and 5.9; pH 3.7 and 3.7; TC and 9.8 and 10.7. mg MS-1; the amount of NFCH was 11.1 and 13.5%; DIG of DM 36.9 and 62.4% for the respectively to the bagasse produced from materials grown in the 2012/2013 and 2013/2014 seasons. Hybrid genotypes had a better agronomic performance while the varieties were more efficient in bromatological indexes. And despite the high percentage of NDF and the low protein level, it is possible to feed ruminants with this coproduct.

Araça amarelo: atividade antioxidante, composição nutricional e aplicação em barra de cereais

Brazil has a great diversity of native fruits, which are not always widely consumed, being sold only in certain regions, due to their difficulty of post-harvest conservation. One such fruit is yellow guava, interesting source of nutrients. To promote the consumption and use of this fruit to the consumer public in different regions of the country, this study evaluated the incorporation of yellow Ya-cy araçá in formulating a cereal bar. Therefore, fruits were evaluated for their chemical, physical and chemical characteristics and bioactive compounds in different stages of maturation yellow guava (green, mature and dried forms). The behavior of guava yellow front of to UV-C radiation was also evaluated. After these reviews, there was obtained yellow ripe guava flour after previous tests, was added to the base formulation cereal bar. For the experimental planning and development of the formulations was used factorial design 22 with a central point. The developed formulations were subjected to sensory evaluation using for treatment of multivariate data analysis (Principal Component Analysis- ACP). The preferred formulation in sensory evaluation was evaluated in their physical characteristics (texture), physical-chemical (moisture, ash, lipids, proteins, carbohydrates, dietary fiber and calorie), mineral content and fatty acid profile. The results indicated that the added yellow guava cereal bar developed in this study is one way to application and use of guava, increasing the consumption of fruit to different regions of the country, and can be considered a functional product, not only to contain the fruit in its composition, but also to present many beneficial nutrients that contribute to the health of consumers.

Validação de metodologia analítica por CLAE-DAD para determinação de compostos fenólicos e atividade biológica em coprodutos agroindustriais

The southern region of Brazil, especially the states of Parana and Santa Catarina stand out for growing grapes and apples for fresh consumption and in order to add value to these products, process the material for the production of wine, juices and jellies . As a result large quantities of by-products, such as peels, seeds and pulp are produced becoming environmental problems. Studies reuse of these by-products have attracted interest because they have shown a high biological potential, due to the presence of high levels of phenolic compounds, which are associated with a lower incidence of disease caused by oxidative stress, due to its antioxidant, antiinflammatory and antibacterial properties. Currently, few studies are presented on the phenolic composition and biological potential of waste grape variety Bordô (Vitis labrusca) and apple (Malus domestica) Gala variety, cultivated in southern Brazil. Within this context, the objectives of this study were: compare the efficiency of solidliquid and liquid-liquid extraction, perform the optimization and validation of analytical methodology by HPLC-DAD for the separation, identification and quantification of multiclass phenolic compounds, evaluate the activity antioxidant by sequestering methods of free radical 2,2-diphenyl-1 picrilhidrazina (DPPH) and 2,2-azino-bis (3- ethyl-benzthiazoline-6-sulphonic acid) (ABTS) solution, reduction of Fe3+ in Fe2+ method (FRAP), ORAC, RP-HPLC-ABTS online, Rancimat and determination of total phenolics three agro-industrial byproducts, pomace and stems grape Bordô produced in Paraná Southwest region and Gala apple pomace coming from the Santa Catarina West. Optimization and validation of chromatographic method showed satisfactory quality parameters for the compounds of interest and the solidliquid extraction was more efficient in extracting phenolic evaluated. The three byproducts evaluated showed significant levels of phenolic compounds when analyzed by HPLC, especially flavonoids, catechin and epicatechin besides that showed significant antioxidant capacity. The grape stems extract had the highest sequestration capacity of DPPH and ABTS radical and reduced iron, and high content of phenolic compounds. The apple pomace extract showed the best response to the Rancimat method, which indicates a high potential to protect the oil from lipid oxidation, was no significant difference when compared to synthetic antioxidant TBHQ. The results of this study showed that the agro-industrial coproducts analyzed are rich in phenolic compounds of high antioxidant capacity and therefore must be better explored by the food and pharmaceutical industries.

Desenvolvimento e aplicação de modelo de calibração multivariada para determinação de açúcares e ácidos orgânicos em bebidas comerciais utilizando espectroscopia no infravermelho

The routine analysis for quantization of organic acids and sugars are generally slow methods that involve the use and preparation of several reagents, require trained professional, the availability of special equipment and is expensive. In this context, it has been increasing investment in research whose purpose is the development of substitutive methods to reference, which are faster, cheap and simple, and infrared spectroscopy have been highlighted in this regard. The present study developed multivariate calibration models for the simultaneous and quantitative determination of ascorbic acid, citric, malic and tartaric and sugars sucrose, glucose and fructose, and soluble solids in juices and fruit nectars and classification models for ACP. We used methods of spectroscopy in the near infrared (Near Infrared, NIR) in association with the method regression of partial least squares (PLS). Were used 42 samples between juices and fruit nectars commercially available in local shops. For the construction of the models were performed with reference analysis using high-performance liquid chromatography (HPLC) and refractometry for the analysis of soluble solids. Subsequently, the acquisition of the spectra was done in triplicate, in the spectral range 12500 to 4000 cm-1. The best models were applied to the quantification of analytes in study on natural juices and juice samples produced in the Paraná Southwest Region. The juices used in the application of the models also underwent physical and chemical analysis. Validation of chromatographic methodology has shown satisfactory results, since the external calibration curve obtained R-square value (R2) above 0.98 and coefficient of variation (%CV) for intermediate precision and repeatability below 8.83%. Through the Principal Component Analysis (PCA) was possible to separate samples of juices into two major groups, grape and apple and tangerine and orange, while for nectars groups separated guava and grape, and pineapple and apple. Different validation methods, and pre-processes that were used separately and in combination, were obtained with multivariate calibration models with average forecast square error (RMSEP) and cross validation (RMSECV) errors below 1.33 and 1.53 g.100 mL-1, respectively and R2 above 0.771, except for malic acid. The physicochemical analysis enabled the characterization of drinks, including the pH working range (variation of 2.83 to 5.79) and acidity within the parameters Regulation for each flavor. Regression models have demonstrated the possibility of determining both ascorbic acids, citric, malic and tartaric with successfully, besides sucrose, glucose and fructose by means of only a spectrum, suggesting that the models are economically viable for quality control and product standardization in the fruit juice and nectars processing industry.

Adsorção de corantes têxteis aniônicos e catiônicos em resíduos do processamento de fios de algodão modificados quimicamente

The textile industry generates a large volume of high organic effluent loading whoseintense color arises from residual dyes. Due to the environmental implications caused by this category of contaminant there is a permanent search for methods to remove these compounds from industrial waste waters. The adsorption alternative is one of the most efficient ways for such a purpose of sequestering/remediation and the use of inexpensive materials such as agricultural residues (e.g., sugarcane bagasse) and cotton dust waste (CDW) from weaving in their natural or chemically modified forms. The inclusion of quaternary amino groups (DEAE+) and methylcarboxylic (CM-) in the CDW cellulosic structure generates an ion exchange capacity in these formerly inert matrix and, consequently, consolidates its ability for electrovalent adsorption of residual textile dyes. The obtained ionic matrices were evaluated for pHpcz, the retention efficiency for various textile dyes in different experimental conditions, such as initial concentration , temperature, contact time in order to determine the kinetic and thermodynamic parameters of adsorption in batch, turning comprehensive how does occur the process, then understood from the respective isotherms. It was observed a change in the pHpcz for CM--CDW (6.07) and DEAE+-CDW (9.66) as compared to the native CDW (6.46), confirming changes in the total surface charge. The ionized matrices were effective for removing all evaluated pure or residual textile dyes under various tested experimental conditions. The kinetics of the adsorption process data had best fitted to the model a pseudosecond order and an intraparticle diffusion model suggested that the process takes place in more than one step. The time required for the system to reach equilibrium varied according to the initial concentration of dye, being faster in diluted solutions. The isotherm model of Langmuir was the best fit to the experimental data. The maximum adsorption capacity varied differently for each tested dye and it is closely related to the interaction adsorbent/adsorbate and dye chemical structure. Few dyes obtained a linear variation of the balance ka constant due to the inversion of temperature and might have influence form their thermodynamic behavior. Dyes that could be evaluated such as BR 18: 1 and AzL, showed features of an endothermic adsorption process (ΔH° positive) and the dye VmL presented exothermic process characteristics (ΔH° negative). ΔG° values suggested that adsorption occurred spontaneously, except for the BY 28 dye, and the values of ΔH° indicated that adsorption occurred by a chemisorption process. The reduction of 31 to 51% in the biodegradability of the matrix after the dye adsorption means that they must go through a cleaning process before being discarded or recycled, and the regeneration test indicates that matrices can be reused up to five times without loss of performance. The DEAE+-CDW matrix was efficient for the removal of color from a real textile effluent reaching an UV-Visible spectral area decrease of 93% when applied in a proportion of 15 g ion exchanger matrix L-1 of colored wastewater, even in the case of the parallel presence of 50 g L-1 of mordant salts in the waste water. The wide range of colored matter removal by the synthesized matrices varied from 40.27 to 98.65 mg g-1 of ionized matrix, obviously depending in each particular chemical structure of the dye upon adsorption.