Drying kinetics, biochemical and functional properties of products in convective drying of anchovy (Engraulis Anchoita) fillets

The aim of this work was to study the convective drying of anchovy (Engraulis anchoita) fillets and to evaluate the final product characteristics through its biochemical and functional properties. The drying temperatures were of 50, 60 and 70°C, and the fillet samples were dried with the skins down (with air flow one or the two sides) and skins up (with air flow one side). The drying experimental data were analyzed by Henderson–Pabis model, which showed a good fit (R2 > 0.99 and REQM < 0.05). The moisture effective diffusivity values ranged from 4.1 10–10 to 8.6 10–10 m2 s−1 with the skin down and 2.2 10–10 to 5.5 10–10 m2 s−1 with the skin up, and the activation energy values were 32.2 and 38.4 kJ mol−1, respectively. The product characteristics were significantly affected (p < 0.05) by drying operation conditions. The lower change was in drying at 60°C with air flow for two sides of the samples and skin up. In this condition, the product showed solubility 22.3%; in vitro digestibility 87.4%; contents of available lysine and methionine 7.21 and 2.64 g 100 g−1, respectively; TBA value 1.16 mgMDA kg−1; specific antioxidant activity was 1.91 mMDPPH g−1 min−1, and variation total color was 10.72.

Evaluation of mechanical properties and water vapor permeability in Chitosan biofilms using Sorbitol and Glycerol

Chitosan biofilms were prepared with and without plasticizer (glycerol and sorbitol). The physical and mechanical properties of chitosan biofilms with and without plasticizer were evaluated. Chitosan was obtained from shrimp wastes and characterized. The film forming solution (FFS) was obtained through chitosan dissolution and drying. The solution had its pH adjusted to 6.0 and oven dried (40 8C, 24 h) with forced air circulation. Chitosan biofilms without plasticizer showed a tensile strength about 36% higher than biofilms produced with plasticizer. On the other hand, biofilms with plasticizer presented superior values of elongation. The permeability of the water vapor and color presented significant difference (p<0.05) between all biofilms. Chitosan/plasticizer biofilms showed higher values of water vapor permeability in relation to chitosan biofilms without plasticizer.

Evaluation of molecular weight of Chitosan in thin-layer and spouted bed drying

Chitosan is chitin in deacetylated form and is the main constituent of crustacean exoskeletons. Commercially, chitosan is dried in tray driers, and during the operation, polymerization may occur as the chitosan is composed of carbohydrates. The aim of this work was to analyze chitosan in spouted bed and thin-layer drying, considering viscosity average molecular weight of the chitosan samples in the process. Results showed that spouted bed-dried chitosan presented a molecular weight value similar (160 kDa) to that of the raw one (150 kDa). However, when dried on tray dryers, the molecular weight was 300 kDa, indicating that molecule polymerization occurred.

Optimisation of Spirulina platensis convective drying: evaluation of phycocyanin loss and lipid oxidation

The aim of the study was the optimisation of Spirulina platensis drying on convective hot air through the response surface methodology. The responses were thiobarbituric acid (TBA) and phycocyanin loss percentage values in final product. Experiments were carried out in perforated tray drier with parallel air flow, and the wet samples thickness and drying air temperatures were in range of 3–7 mm and 50–70 °C, respectively. The statistical analysis showed significant effect (P < 0.05) for air temperature and samples thickness. In the best drying condition, 55 °C and 3.7 mm, presented the phycocyanin loss percentage and the TBA values of approximately 37% and 1.5 mgMDA kg−1, respectively. In this drying condition, the fatty acids composition of the microalgae Spirulina did not show significance difference (P > 0.05) in relation to fresh biomass. The lipid profile of dried product presented high percentage of polyunsaturated fatty acids (34.4%), especially the gamma-linolenic acid (20.6%).