Activated Carbons Produced from Mixtures of Synthetic Polymers by Physical and Chemical Activation: Application on MCPA Removal

The production of AC was achieved using the most common industrial and consumer solid waste, namely PET, alone or blended with other synthetic polymer such PAN. The PET-PAN mixture (1:1 W/W %) was subjected to carbonization, with a pyrolysis yield off 31.9%, between that obtained with PET (16.9%) or PAN (42.6%) separately. By mixing PET, as a raw material, with PAN (different ratio), an improvement in the final yield of the AC production, for the same activation time, with CO2, was found.

Activated Carbons Produced from Mixtures of Synthetic Polymers by Physical and Chemical Activation: Application on MCPA Removal

The production of AC was achieved using the most common industrial and consumer solid waste, namely PET, alone or blended with other synthetic polymer such PAN. The PET-PAN mixture (1:1 W/W %) was subjected to carbonization, with a pyrolysis yield off 31.9%, between that obtained with PET (16.9%) or PAN (42.6%) separately. By mixing PET, as a raw material, with PAN (different ratio), an improvement in the final yield of the AC production, for the same activation time, with CO2, was found.

Effects of pitch area-restrictions on tactical behavior, physical and physiological performances in soccer large-sided games

The aim of this study was to identify how pitch area-restrictions affects the tactical behavior, physical and physiological performances of players during soccer large-sided games. A 10 vs. 9 large-sided game was performed under three experimental conditions: (i) restricted-spacing, the pitch was divided into specific areas where players were assigned and they should not leave it; (ii) contiguous-spacing, the pitch was divided into specific areas where the players were only allowed to move to a neighboring one; (iii) free-spacing, the players had no restrictions in space occupation. The positional data were used to compute players’ spatial exploration index and also the distance, coefficient of variation, approximate entropy and frequency of near-in-phase displacements synchronization of players’ dyads formed by the outfield teammates. Players’ physical and physiological performances were assessed by the distance covered at different speed categories, game pace and heart rate. Most likely higher values were found in players’ spatial exploration index under free-spacing conditions. The synchronization between dyads’ displacements showed higher values for contiguous-spacing and free-spacing conditions. In contrast, for the jogging and running intensity zones, restricted-spacing demanded a moderate effect and most likely decrease compared to other scenarios (~20-50% to jogging and ~60-90% to running). Overall, the effects of limiting players’ spatial exploration greatly impaired the co-adaptation between teammates’ positioning while decreasing the physical and physiological performances. These results allow for a better understanding of players’ decision-making process according to specific task rules and can be relevant to enrich practice task design, such that coaches acknowledge the differential effect by using specific pitch-position areas restrictions.

Mechanical properties of adobe blocks used in building construction in Huambo Province - Angola

Despite significant advances in building technologies with the use of conventional construction materials (as concrete and steel), which significantly have driven the construction industry, earth construction have demonstrated its importance and relevance, as well as it has matched in an efficient and eco-friendly manner the social housing concerns. The diversity of earth construction techniques allowed this material to adapt to different climatic, cultural and social contexts until the present time. However, in Angola, the construction with earth is still associated with population fringes of weak economic resources, for which, given the impossibility of being able to acquire modern construction materials (steel, cement, brick, among others), they resort to the use of available natural materials. Furthermore, the lack of scientific and technical knowledge justifies the negative appreciation of traditional building techniques, and the derogatory way how are considered the earth constructions in Angolan territory. Given the country's current development status, and taking into account the environmental requirements and the real socio-economic sustainability of Angola, it is considered that one of the viable and adequate options, could be the recovering and upgrading of the ancestral techniques of earth construction. The purpose of this research is to develop the technical and scientific knowledge in order to improve and optimize these construction solutions, responding to the real problems of housing quality as well as to the current social, economic and environmental sustainability requirements. In this paper, a description of the physical and mechanical characteristics of the adobes typically used in the construction of traditional houses in some localities of Huambo, province in Angola, is carried out. The methodology was based on mechanical in-situ testing in adobe blocks manufactured with traditional procedures: i) tensile strength evaluated with the bending test and compressive strength test on earth blocks specimens; and, ii) durability and erodibility test by Geelong method adopting the New Zealand standard (NZS) procedures (4297: 1998; 4297: 1998 and 4297: 1999). The results allow the characterization of the materials used in the construction of raw earth in the Huambo region, contributing to the development of knowledge of these sustainable and traditional housing constructive solutions with a strong presence in Angola [1, 2]. This study is part of a larger project in the area of Earth Construction [3], which aims to produce knowledge which can stimulate the use of environmental friendly construction materials and contribute to develop constructive solutions with improved performance, durability, comfort, safety and sustainability.