Methods of earth building in the Huila Province, Angola

In Angola, the construction made of raw earth is a cultural heritage widely used by low income households, representing over 80% of the population [1, 3]. In Huila province is evident construction in raw earth in a large scale, either in urban or in periurban and rural areas. The construction methods follow the ancestral standards, distributed throughout the region of Huila, being built by the several ethnic groups. Among the construction techniques in earth, stand out: the adobe, wattle-and-daub and more recently on CEB (Compressed Earth Block). The type of soil used to make the adobes is mainly silty-clayed sand [1]. The most applied materials are: rods, reeds, wood, grass, straw, soil and stone, almost with the same characteristics [2]. The manufacture of adobe, consists essentially in mixing clay and grass (plant fibers), then put the mixture inside a wooden mold, having a size of 42 cm long and 18 cm high and taking three to four days to dry and be applied in housing construction. The application of these materials makes the construction less expensive because they are collected, transformed and applied by the owner himself of housing without any project, based only on the result of the practice and experience acquired from their ancestors. They are simple constructions, presenting a typology of grouped and isolated single-family housing, ranging between 2 and 3 bedrooms [2]. The construction techniques used in such small housings have positive environmental aspects, both as regards the materials employed, such as the manner in which the constructions are raised, showing special concerns for the quality improvement of them, as regards the resistance, durability and comfort [4].

Above ground biomass estimation in Mediterranean multiple use systems with high spatial resolution satellite images

Forest biomass has been having an increasing importance in the world economy and in the evaluation of the forests development and monitoring. It was identified as a global strategic reserve, due to its applications in bioenergy, bioproduct development and issues related to reducing greenhouse gas emissions. The estimation of above ground biomass is frequently done with allometric functions per species with plot inventory data. An adequate sampling design and intensity for an error threshold is required. The estimation per unit area is done using an extrapolation method. This procedure is labour demanding and costly. The mail goal of this study is the development of allometric functions for the estimation of above ground biomass with ground cover as independent variable, for forest areas of holm aok (Quercus rotundifolia), cork oak (Quercus suber) and umbrella pine (Pinus pinea) in multiple use systems. Ground cover per species was derived from crown horizontal projection obtained by processing high resolution satellite images, orthorectified, geometrically and atmospheric corrected, with multi-resolution segmentation method and object oriented classification. Forest inventory data were used to estimate plot above ground biomass with published allometric functions at tree level. The developed functions were fitted for monospecies stands and for multispecies stands of Quercus rotundifolia and Quercus suber, and Quercus suber and Pinus pinea. The stand composition was considered adding dummy variables to distinguish monospecies from multispecies stands. The models showed a good performance. Noteworthy is that the dummy variables, reflecting the differences between species, originated improvements in the models. Significant differences were found for above ground biomass estimation with the functions with and without the dummy variables. An error threshold of 10% corresponds to stand areas of about 40 ha. This method enables the overall area evaluation, not requiring extrapolation procedures, for the three species, which occur frequently in multispecies stands.

Avaliação de métodos de estimação da variância em amostras complexas

A necessidade de conhecer uma população impulsiona um processo de recolha e análise de informação. Usualmente é muito difícil ou impossível estudar a totalidade da população, daí a importância do estudo com recurso a amostras. Conceber um estudo por amostragem é um processo complexo, desde antes da recolha dos dados até a fase de análise dos mesmos. Na maior parte dos estudos utilizam-se combinações de vários métodos probabilísticos de amostragem para seleção de uma amostra, que se pretende representativa da população, denominado delineamento de amostragem complexo. O conhecimento dos erros de amostragem é necessário à correta interpretação dos resultados de inquéritos e à avaliação dos seus planos de amostragem. Em amostras complexas, têm sido usadas aproximações ajustadas à natureza complexa do plano da amostra para a estimação da variância, sendo as mais utilizadas: o método de linearização Taylor e as técnicas de reamostragem e replicação. O principal objetivo deste trabalho é avaliar o desempenho dos estimadores usuais da variância em amostras complexas. Inspirado num conjunto de dados reais foram geradas três populações com características distintas, das quais foram sorteadas amostras com diferentes delineamentos de amostragem, na expectativa de obter alguma indicação sobre em que situações se deve optar por cada um dos estimadores da variância. Com base nos resultados obtidos, podemos concluir que o desempenho dos estimadores da variância da média amostral de Taylor, Jacknife e Bootstrap varia com o tipo de delineamento e população. De um modo geral, o estimador de Bootstrap é o menos preciso e em delineamentos estratificados os estimadores de Taylor e Jackknife fornecem os mesmos resultados; Evaluation of variance estimation methods in complex samples ABSTRACT: The need to know a population drives a process of collecting and analyzing information. Usually is to hard or even impossible to study the whole population, hence the importance of sampling. Framing a study by sampling is a complex process, from before the data collection until the data analysis. Many studies have used combinations of various probabilistic sampling methods for selecting a representative sample of the population, calling it complex sampling design. Knowledge of sampling errors is essential for correct interpretation of the survey results and evaluation of the sampling plans. In complex samples to estimate the variance has been approaches adjusted to the complex nature of the sample plane. The most common are: the linearization method of Taylor and techniques of resampling and replication. The main objective of this study is to evaluate the performance of usual estimators of the variance in complex samples. Inspired on real data we will generate three populations with distinct characteristics. From this populations will be drawn samples using different sampling designs. In the end we intend to get some lights about in which situations we should opt for each one of the variance estimators. Our results show that the performance of the variance estimators of sample mean Taylor, Jacknife and Bootstrap varies with the design and population. In general, the Bootstrap estimator is less precise and in stratified design Taylor and Jackknife estimators provide the same results.

Umbrella pine above ground biomass estimation with very high spatial resolution satellite images

Above ground biomass is frequently estimated with forest inventory data and an extrapolation method for the per unit area evaluations. This procedure is labour demanding and costly. In this study above ground biomass functions, whose independent variable is crown horizontal projection, were developed. Multi-resolution segmentation method and object-oriented classification, based on very high spatial resolution satellite images, were used to obtain the area of tree crown horizontal projection for umbrella pine (Pinus pinea L.). A set of inventory plots were measured and with existing allometric functions for this species above ground biomass per tree and per plot were calculated. The two data sets were used to fit linear functions both for individual plot and their cumulative values. The results show a good performance of the models. Errors smaller than 10% are obtained for stand areas greater than 1.4 ha. These functions have the advantages of estimating above ground biomass for all the area under study or surveillance, not requiring forest inventory; allow monitoring in short time periods; and are easily implemented in a geographical information system environment.

Above ground biomass functions with vegetation indices for multiple use systems of two evergreen oaks

Remote sensing is a promising approach for above ground biomass estimation, as forest parameters can be obtained indirectly. The analysis in space and time is quite straight forward due to the flexibility of the method to determine forest crown parameters with remote sensing. It can be used to evaluate and monitoring for example the development of a forest area in time and the impact of disturbances, such as silvicultural practices or deforestation. The vegetation indices, which condense data in a quantitative numeric manner, have been used to estimate several forest parameters, such as the volume, basal area and above ground biomass. The objective of this study was the development of allometric functions to estimate above ground biomass using vegetation indices as independent variables. The vegetation indices used were the Normalized Difference Vegetation Index (NDVI), Enhanced Vegetation Index (EVI), Simple Ratio (SR) and Soil-Adjusted Vegetation Index (SAVI). QuickBird satellite data, with 0.70 m of spatial resolution, was orthorectified, geometrically and atmospheric corrected, and the digital number were converted to top of atmosphere reflectance (ToA). Forest inventory data and published allometric functions at tree level were used to estimate above ground biomass per plot. Linear functions were fitted for the monospecies and multispecies stands of two evergreen oaks (Quercus suber and Quercus rotundifolia) in multiple use systems, montados. The allometric above ground biomass functions were fitted considering the mean and the median of each vegetation index per grid as independent variable. Species composition as a dummy variable was also considered as an independent variable. The linear functions with better performance are those with mean NDVI or mean SR as independent variable. Noteworthy is that the two better functions for monospecies cork oak stands have median NDVI or median SR as independent variable. When species composition dummy variables are included in the function (with stepwise regression) the best model has median NDVI as independent variable. The vegetation indices with the worse model performance were EVI and SAVI.

Protein markers of B. xylophilus Steiner & Buhrer, 1934 (Nickle, 1970) populations using quantitative proteomics and character compatibility.

The Pine Wood Nematode (PWN) Bursaphelenchus xylophilus is a severe forest pathogen in countries where it has been introduced and is considered a worldwide quarantine organism. In this study, protein markers for differentiating populations of this nematode were identified by studying differences among four selected Iberian and one American population. These populations were compared by quantitative proteomics (iTRAQ). From a total of 2860 proteins identified using the public database from the B. xylophilus genome project, 216 were unambiguous and significantly differentially regulated in the studied populations. Comparisons of their pairwise ratio were statistically treated and supported in order to convert them into discrete character states, suggesting that 141 proteins were not informative as population specific markers. Application of the Character Compatibility methodology on the remaining 75 proteins (belonging to families with different biological functions) excludes 27 which are incompatible among them. Considering only the compatible proteins, the method selects a subset of 30 specific unique protein markers which allowed the compared classification of the Iberian isolates. This approach makes it easier search for diagnostic tools and phylogenetic inference within species and populations of a pathogen exhibiting a high level of genetic diversity.