Implementation and Validation of a Self-Consumption Maximization Energy Management Strategy in a Vanadium Redox Flow BIPV Demonstrator

This paper presents the results of the implementation of a self-consumption maximization strategy tested in a real-scale Vanadium Redox Flow Battery (VRFB) (5 kW, 60 kWh) and Building Integrated Photovoltaics (BIPV) demonstrator (6.74 kWp). The tested energy management strategy aims to maximize the consumption of energy generated by a BIPV system through the usage of a battery. Whenever possible, the residual load is either stored in the battery to be used later or is supplied by the energy stored previously. The strategy was tested over seven days in a real-scale VRF battery to assess the validity of this battery to implement BIPV-focused energy management strategies. The results show that it was possible to obtain a self-consumption ratio of 100.0%, and that 75.6% of the energy consumed was provided by PV power. The VRFB was able to perform the strategy, although it was noticed that the available power (either to charge or discharge) varied with the state of charge.

Leaf water potential and sap flow as indicators of water stress in Crimson ‘seedless’ grapevines under different irrigation strategies

Vitis vinifera L. cv. Crimson Seedless is a late season red table grape developed in 1989, with a high market value and increasingly cultivated under protected environments to extend the availability of seedless table grapes into the late fall. The purpose of this work was to evaluate leaf water potential and sap flow as indicators of water stress in Crimson Seedless vines under standard and reduced irrigation strategy, consisting of 70 % of the standard irrigation depth. Additionally, two sub-treatments were applied, consisting of normal irrigation throughout the growing season and a short irrigation induced stress period between veraison and harvest. Leaf water potential measurements coherently signaled crop-available water variations caused by different irrigation treatments, suggesting that this plant-based method can be reliably used to identify water-stress conditions. The use of sap flow density data to establish a ratio based on a reference ‘well irrigated vine’ and less irrigated vines can potentially be used to signal differences in the transpiration rates, which may be suitable for improving irrigation management strategies while preventing undesirable levels of water stress. Although all four irrigation strategies resulted in the production of quality table grapes, significant differences (p ≤ 0.05) were found in both berry weight and sugar content between the standard irrigation and reduced irrigation treatments. Reduced irrigation increased slightly the average berry size as well as sugar content and technical maturity index. The 2-week irrigation stress period had a negative effect on these parameters.

Leaf water potential and sap flow as indicators of water stress in Crimson 'seedless' grapevines under different irrigation strategies

Abstract Vitis vinifera L. cv. Crimson Seedless is a late season red table grape developed in 1989, with a high market value and increasingly cultivated under protected environments to extend the availability of seedless table grapes into the late fall. The purpose of this work was to evaluate leaf water potential and sap flow as indicators of water stress in Crimson Seedless vines under standard and reduced irrigation strategy, consisting of 70 % of the standard irrigation depth. Additionally, two sub-treatments were applied, consisting of normal irrigation throughout the growing season and a short irrigation induced stress period between veraison and harvest. Leaf water potential measurements coherently signaled crop-available water variations caused by different irrigation treatments, suggesting that this plant-based method can be reliably used to identify water-stress conditions. The use of sap flow density data to establish a ratio based on a reference ‘well irrigated vine’ and less irrigated vines can potentially be used to signal differences in the transpiration rates, which may be suitable for improving irrigation management strategies while preventing undesirable levels of water stress. Although all four irrigation strategies resulted in the production of quality table grapes, significant differences (p ≤ 0.05) were found in both berry weight and sugar content between the standard irrigation and reduced irrigation treatments. Reduced irrigation increased slightly the average berry size as well as sugar content and technical maturity index. The 2-week irrigation stress period had a negative effect on these parameters.

Advances in integration of photovoltaic power and energy production in practical systems

This thesis presents advances in integration of photovoltaic (PV) power and energy in practical systems, such as existing power plants in buildings or directly integrated in the public electrical grid. It starts by providing an analyze of the current state of PV power and some of its limitations. The work done in this thesis begins by providing a model to compute mutual shading in large PV plants, and after provides a study of the integration of a PV plant in a biogas power plant. The remainder sections focus on the work done for project PVCROPS, which consisted on the construction and operation of two prototypes composed of a PV system and a novel battery connected to a building and to the public electrical grid. These prototypes were then used to test energy management strategies and validate the suitability of the two advanced batteries (a lithium-ion battery and a vanadium redox ow battery) for households (BIPV) and PV plants. This thesis is divided in 7 chapters: Chapter 1 provides an introduction to explain and develop the main research questions studied for this thesis; Chapter 2 presents the development of a ray-tracing model to compute shading in large PV elds (with or without trackers); Chapter 3 shows the simulation of hybridizing a biogas plant with a PV plant, using biogas as energy storage; Chapters 4 and 5 present the construction, programming, and initial operation of both prototypes (Chapter 4), EMS testing oriented to BIPV systems (Chapter 5). Finally, Chapters 6 provides some future lines of investigation that can follow this thesis, and Chapter 7 shows a synopsis of the main conclusions of this work; Resumo: Avanços na integracão de potência fotovoltaica e producão de energia em sistemas práticos Esta tese apresenta avanços na integração de potência e energia fotovoltaica (PV) em sistemas práticos, tais como centrais existentes ou a rede eléctrica pública. Come ça por analisar o estado corrente do fotovoltaico no mundo e aborda algumas das suas limitações. O trabalho feito para esta tese de doutoramento começou pelo desenvolvimento de um modelo para calcular os sombreamentos que ocorrem em grandes campos fotovoltaicos, e depois apresenta um estudo sobre a integração um sistema fotovoltaico em uma central eléctrica a bióg as. As ultimas secções da tese focam-se no trabalho feito para o projecto PVCROPS, que consistiu na construção e operação de dois demonstratores, cada um formado por um sistema fotovoltaico e bateria conectados a um edíficio e a rede eléctrica pública. Estes protótipos foram posteriormente utilizados para testar estratégias de gestão de energia (EMS) e para validar a operação de duas baterias avançadas (bateria de Iões de Li tio e bateria de Fluxo Redox de Van adio) e a sua utiliza ção para habitações e centrais PV. A tese está dividida em 7 capitulos: O capitulo 1 apresenta uma introdução para explicar e desenvolver as principais questões que foram investigadas nesta tese; O capitulo 2 mostra o desenvolvimento de um modelo baseado em traçados de raios para calcular sombreamentos mútuos em grandes centrais PV (com e sem seguidores); O capitulo 3 mostra a simulação da hibridização de uma central electrica a biogas com uma central PV, e utilizando o biógas como armazenamento de energia. Os capitulos 4 e 5 apresentam a construção, programação e operação inicial dos dois demonstradores (Capitúlo 4), o teste de EMS orientadas para sistemas PV em habitações (Capítulo 5). Finalmente, o capítulo 6 sugere algumas futuras linhas de investigação que poderão seguir esta tese, e o Capítulo 7 faz uma sinopse das principais conclusões deste trabalho.

An update on the genera Longidorus , Paralongidorus and Xiphinema (Family Longidoridae) in Portugal

The tribe Longidorini within the subfamily Longidorinae (Longidorus spp. and Paralongidorus spp.) and the subfamily Xiphineminae (Xiphinema spp.) are two large nematode groups with about 260 and 230 known species, respectively. They are globally two important groups of ectoparasitic nematodes considered to be major pests because of their activity as vectors of important plant nepovirus, with some species included in the list of quarantine pathogenic organisms in many European countries. Knowledge of the biodiversity and occurrence of this nematode group is a prerequisite for the establishment of sound management strategies and control measures. According to data collected from the databases (such as EPPO, FSTA, and Web of Science) and published in specialised literature, a total of 15 Longidorus, 1 Paralongidorus and 40 Xiphinema species have been recorded as present in Portugal. However, the taxonomic status of some species is controversial, and thus needs to be clarified. A comprehensive review for unravelling the biodiversity and occurrence of nematode species of the genus Longidorus, Paralongidorus and Xiphinema in Portugal is herein provided. This review includes an updated checklist of species with information on the localities, host plants and geographical distribution. Additionally, maps on the species distributions of Longidorinae and Xiphineminae nematodes present in Continental Portugal and the Portuguese Macaronesian islands are provided, as well as unpublished data on authors and comments on the current taxonomic status. Finally, new insights and directions for future research on Longidoridae in Portugal are presented.

Emergy analysis of a silvo-pastoral system, a case study in southern Portugal

The Mediterranean silvo-pastoral system known as Montado, in Portugal, is a complex land use system composed of an open tree stratum in various densities and an herbaceous layer, used for livestock grazing. Livestock also profit from the acorns, and the grazing contributes to avoid shrub encroachment. In the last 20 years, subsidies from the European Union have greatly promoted cattle rearing in this system and the introduction of heavy breeds, at the expense of sheep, goats or the native cattle breeds. The balance of the traditional system is thus threatened, and a precise assessment of the balance between the different components of the system, therefore is highly needed. The goal of this study was to gain a better under- standing of a Montado farm system with cattle rearing as the major economic activity by applying the emergy evaluation method to calculate indices of yield, investment, environmental loading and sustainability. By integrating different ecosystem components, the emergy evaluation method allows a comprehensive evaluation of this complex and multifunctional system at the scale of an individual farm. This method provides a set of indices that can help us understand the system and design management strategies that maximize emergy flow in the farm. In this paper, we apply the emergy evaluation method to a Montado farm with cattle rearing, as a way to gain a better understanding of this system at the farm scale. The value for the transformity of veal (2.66E?06 sej J-1) is slightly higher, when compared to other systems producing protein. That means that the investment of nature and man in this product was higher and it requires a premium price on the market. The renewa- bility for Holm Oaks Farm (49 %), lower than for other similar systems, supports the assumption that this is a farm in which, comparing with others, the number of purchased inputs in relation to renewable inputs provided by nature, is higher. The Emergy Investment Ratio is 0.91 for cattle rearing compared to a value of 0.49 for cork and 0.43 for firewood harvesting, making it clear that cattle rearing is a more labor demanding activity comparing with extractive activities as cork and firewood harvesting.