Regras de operação do reservatório de Magos para controlo de cheias

Face à Directiva 2007/60/CE relativa à avaliação e gestão do risco de inundações, ao Decreto-Lei nº 344/2007 que aprova o Regulamento de Segurança de Barragens, ao aumento de áreas urbanizadas e às projecções dos modelos de clima para o fim do século, que apontam para o aumento da frequência e da intensidade da ocorrência de inundações causadas por eventos de precipitação intensa de curta duração, é crucial a definição de regras de operação nos reservatórios com controlo de cheias. O Reservatório de Magos pertence à bacia hidrográfica do rio Tejo, está situado no Concelho de Salvaterra de Magos e tem como usos principais a rega e o controlo de cheias. Este trabalho tem como objecto de estudo a definição das regras de operação (restrição no caudal descarregado) do Reservatório de Magos para controlo de cheias no troço a jusante. São aplicados o modelo hidrológico HEC-HMS 3.1.0, o modelo hidráulico HEC-RAS 3.1.3 e o modelo de simulação de reservatórios HEC-ResSim 3.O para o cálculo do hidrograma de cheia, da zona inundável e para simulação do balanço de água no reservatório, respectivamente. Como resultado são apresentadas as regras de operação (caudal máximo e mínimo a descarregar) do Reservatório de Magos para controlo da zona inundável a jusante, no caso de um evento de cheia. /ABSTRACT: Based on the Directive 2007/60/CE related to the Assessment and Management of Flood Risks, on the Decree-Law n. o 344/2007 which approves the Regulation for Dam Safety, the increased urban areas and to the projections of climate models by the end of the century which is pointing to an increased frequency and intensity of occurrence of floods caused by intense rainfall events of short duration, establishing rules of operation for flood control in reservoirs becomes crucial. The Magos Reservoir belongs to the river Tagus basin, located in the county of Salvaterra de Magos and has as its main uses the irrigation and flood control. This study aims to establish the rules of operation (flow discharged restriction) of the Reservoir of Magos for flood control in the downstream reach. The methodology used in the present work includes the application of the Hydrological model HEC-HMS 3.1.0, the Hydraulic model HEC-RAS 3.1.3 and a reservoir simulation model HEC-ResSim 3.0 to calculate the hydrograph of peak discharge, floodplain zone and simulate reservoir operations, respectively. As a result, the rules of operation (maximum flow and minimum discharge) of Magos Reservoir for flood control in a downstream reach in case of flood event are presented.

Avaliação do efeito do corte horizontal da copa, com máquina de podar de discos, em pomares de pera “Rocha

Current pear pruning making use of pneumatic shears still is a very labour intensive operation. The Proder project “Avaliação da poda mecânica em pomares de pera” was designed to contribute to solutions that would reduce the present dependence in labour and therefore to promote a reduction in pruning costs. This paper shows the results of a trial made to evaluate the influence of mechanical topping in manual pruning complement field work and pear yield. Topping was performed using a Reynolds 6DT 3.0m cutting bar with six hydraulic-driven circular disc-saws mounted in the three point tractor linkage system. The field trial was performed in a commercial orchard with 20 years, planted in an array of 4m x 2m with tree lines oriented in North-South direction. Trees were trained as the central leader system. In this trial, in a randomised complete block design with four replications, two treatments are being compared leading to 8 plots with one line of 14 trees per plot. The treatments tests were: T1 - manual pruning performed by workers using pneumatic shears, in each year; T2 - Topping the canopy parallel to the ground, using a discs-saw pruning machine mounted in a front loader of an agricultural tractor, followed by manual pruning complement performed by workers with pneumatic shears. Tree height and width was measured, before and after pruning. Work was timed and pear yields evaluated. Mechanical topping seems to be effective in the control of tree height, which can contribute to increase 14% of work rates on manual pruning complement. No significant differences in pear yield were found between treatments.