O comprimento descritivo mínimo na amostragem por transectos lineares

Apresenta·se um breve resumo histórico da evolução da amostragem por transectos lineares e desenvolve·se a sua teoria. Descrevemos a teoria de amostragem por transectos lineares, proposta por Buckland (1992), sendo apresentados os pontos mais relevantes, no que diz respeito à modelação da função de detecção. Apresentamos uma descrição do princípio CDM (Rissanen, 1978) e a sua aplicação à estimação de uma função densidade por um histograma (Kontkanen e Myllymãki, 2006), procedendo à aplicação de um exemplo prático, recorrendo a uma mistura de densidades. Procedemos à sua aplicação ao cálculo do estimador da probabilidade de detecção, no caso dos transectos lineares e desta forma estimar a densidade populacional de animais. Analisamos dois casos práticos, clássicos na amostragem por distâncias, comparando os resultados obtidos. De forma a avaliar a metodologia, simulámos vários conjuntos de observações, tendo como base o exemplo das estacas, recorrendo às funções de detecção semi-normal, taxa de risco, exponencial e uniforme com um cosseno. Os resultados foram obtidos com o programa DISTANCE (Thomas et al., in press) e um algoritmo escrito em linguagem C, cedido pelo Professor Doutor Petri Kontkanen (Departamento de Ciências da Computação, Universidade de Helsínquia). Foram desenvolvidos programas de forma a calcular intervalos de confiança recorrendo à técnica bootstrap (Efron, 1978). São discutidos os resultados finais e apresentadas sugestões de desenvolvimentos futuros. ABSTRACT; We present a brief historical note on the evolution of line transect sampling and its theoretical developments. We describe line transect sampling theory as proposed by Buckland (1992), and present the most relevant issues about modeling the detection function. We present a description of the CDM principle (Rissanen, 1978) and its application to histogram density estimation (Kontkanen and Myllymãki, 2006), with a practical example, using a mixture of densities. We proceed with the application and estimate probability of detection and animal population density in the context of line transect sampling. Two classical examples from the literature are analyzed and compared. ln order to evaluate the proposed methodology, we carry out a simulation study based on a wooden stakes example, and using as detection functions half normal, hazard rate, exponential and uniform with a cosine term. The results were obtained using program DISTANCE (Thomas et al., in press), and an algorithm written in C language, kindly offered by Professor Petri Kontkanen (Department of Computer Science, University of Helsinki). We develop some programs in order to estimate confidence intervals using the bootstrap technique (Efron, 1978). Finally, the results are presented and discussed with suggestions for future developments.

Some comments about the use of GHP in Alentejo (Portugal)

In this work we advocate the use of geothermal pumps to cool the isolated houses that can be observed in the plain of Alentejo. Passive cooling of the houses, made for centuries, becomes insufficient when it aims to promote tourism in the region. The climatic characteristics of the region and the relatively high values of the thermal conductivity of the ground favour this type of use. The available land around the houses provide places where you can drill or make trenches to put the pipes under the surface . Some values of pipe lengths were obtained using values appropriate for the region. The need to try to preserve the shape of the typical houses of the region discourages the use of solar panels placed on the roofs. The length and time of use of the equipment is another factor to take into account in the analysis of the costs.

Simplified Chinese lacquer techniques and Nanban style decoration on Luso-Asian objects from the late sixteenth or early seventeenth centuries

The meeting of multiple cultures and their mutual influence during the Portuguese expansion in Asia led to the emergence of different types of fusion styles in objects commissioned by the settlers, merchants, and religious orders present in Portuguese India. The east-Asian lacquer coatings of modestly sized wooden objects of various types dating from the sixteenth and early seventeenth centuries have been analyzed as part of the research for a doctoral thesis that aims to establish their cultural and geographical attribution within the context of the Getty Conservation Institute’s lacquer research project. Among the objects were three seventeenthcentury lacquered trays from Portuguese museums and private collections that had previously been classified as Japanese Nanban, Chinese or Ryukyuan lacquers or even as Indo-Portuguese artifacts. The materials and techniques that were identified show close similarities with Chinese techniques mentioned in historic accounts — the only existing Ming Chinese Treatise on lacquering Xiushi lu and the eighteenth-century memoirs of the Jesuit priest d’Incarville. These nearly 400-year-old artifacts are among the first lacquered objects commissioned by Europeans and probably the first of Chinese origin. Their detailed technical study contributes to international lacquer research and complements existing knowledge and perceptions of the lacquering processes that were applied in response to an early European demand for exotic items.

Uncover the mantle: rediscovering Gregório Lopes palette and technique with a study on the painting “Mater Misericordiae”

Grego´rio Lopes (c. 1490–1550) was one of the most prominent painters of the renaissance and Mannerism in Portugal. The painting “Mater Misericordiae” made for the Sesimbra Holy House of Mercy, circa 1535–1538, is one of the most significant works of the artist, and his only painting on this theme, being also one of the most significant Portuguese paintings of sixteenth century. The recent restoration provided the possibility to study materially the painting for the first time, with a multianalytical methodology incorporating portable energy-dispersive X-ray fluorescence spectroscopy, scanning electron microscopy–energy-dispersive spectroscopy, micro-X-ray diffraction, micro-Raman spectroscopy and high-performance liquid chromatography coupled to diode array and mass spectrometry detectors. The analytical study was complemented by infrared reflectography, allowing the study of the underdrawing technique and also by dendrochronology to confirm the date of the wooden panels (1535–1538). The results of this study were compared with previous ones on the painter’s workshop, and significant differences and similitudes were found in the materials and techniques used

God is in the detail. Gold, silver and polychromy

The visible polychromy of a wooden sculpture representing St. John the Evangelist, from Museu Nacional de Arte Antiga, Lisbon (Portugal) presents several techniques that complement each other on the creation of a sumptuous estofado. This case-study allowed the survey on gilding, silvering and polychromy practices, and observations on their execution are briefly reported and documented with results from a multi-analytical approach. Examination included digital photomicrography and the observation of micro-samples cross-sections, while material identification resorted to several analytical methods that included scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS) and X-ray diffraction (XRD).

Methods of earth building in the Huila Province, Angola

In Angola, the construction made of raw earth is a cultural heritage widely used by low income households, representing over 80% of the population [1, 3]. In Huila province is evident construction in raw earth in a large scale, either in urban or in periurban and rural areas. The construction methods follow the ancestral standards, distributed throughout the region of Huila, being built by the several ethnic groups. Among the construction techniques in earth, stand out: the adobe, wattle-and-daub and more recently on CEB (Compressed Earth Block). The type of soil used to make the adobes is mainly silty-clayed sand [1]. The most applied materials are: rods, reeds, wood, grass, straw, soil and stone, almost with the same characteristics [2]. The manufacture of adobe, consists essentially in mixing clay and grass (plant fibers), then put the mixture inside a wooden mold, having a size of 42 cm long and 18 cm high and taking three to four days to dry and be applied in housing construction. The application of these materials makes the construction less expensive because they are collected, transformed and applied by the owner himself of housing without any project, based only on the result of the practice and experience acquired from their ancestors. They are simple constructions, presenting a typology of grouped and isolated single-family housing, ranging between 2 and 3 bedrooms [2]. The construction techniques used in such small housings have positive environmental aspects, both as regards the materials employed, such as the manner in which the constructions are raised, showing special concerns for the quality improvement of them, as regards the resistance, durability and comfort [4].

19th c. Coloured stuccos and plasters from Grilos' Church (Oporto, Portugal): Materials and techniques employed

The Oporto's St. Lourenço Church of the Jesuit College is locally known, since the St. Augustin Barefooted Eremites occupation (1779/80), as Grilos' Church. The Oporto's siege laid by D. Pedro and D. Miguel (1832/33) succeed in the college abandonment by Grilo's Friars. Throughout Augustin Friars presence period, the white plasters of the nave (end of 18th c.) were executed and it was constructed the Holly Sacrament Chapel (early 19th c.) with neoclassic coloured stuccos and plasters, influenced by Robert Adam, Luigi Chiari and Teixeira Barreto ornamental motifs. Pigments were added to the external layer to imitate the marble and to achieve the “base” colour of the panels. This study of the blue, rose and white stuccos and plasters of H.S. Chapel of Grilo's Church allows carrying out useful database on the original mortars composition by the use of different analytical techniques, important to select the most adequate solutions for restoration interventions. Optical microscopy, XRD, TG-DTA, SEM-EDS, XRF analysis results were considered to identify the composition of different layers and to provide mineralogical, microstructure and chemical characterization of the mortars components and to quantify the binder content in those mortars. These results were compared with collected information on compositions from other sources. This study allowed the identification of the decay causes of decorative stuccos and plaster, suggesting that water retention in the masonries and wooden laths structure of the dome of the chapel is the main factor.

Abstraction and use of groundwater for heating buildings in a hard rock environment

In order to turn more efficient the heating of class rooms in the lower floor of the old building of the University of Évora (a XVI century building), five drillings were organised inside the area of the university (Figure 1). The purpose was to use the temperature differential of groundwater in relation to air, by means of a heat exchanger, and use this process to heat the rooms using less energy, turning the heating process less expensive. The wells were drilled in fractured rocks (gneisses), and the purpose was to locate them at least around 100 m one from each other, whilst trying to have a hydraulic connection in-between. From the five initial wells, four were successful in terms of productivity, but just two of them (RA1 and RA2) proved to be hydraulically connected. The wells were equipped with screens for all their drilled depth (100 m), except for the first six meters and some two or three pipes of six meters each, to allow space for the installation for submersible pumps. The length of the installed screens guarantees a good efficiency of the system. In the wells with no connection, the heating system can work using each single well for abstraction and injection, but the process is much less efficient than in the cases where interaction between wells is possible through the rock’s fracture network.