Biodiesel production from waste cooking oil over sulfonated catalysts

Biodiesel production from waste cooking oil with methanol was carried out in the presence of poly(vinyl alcohol) with sulfonic acid groups (PVA-SO3H) and polystyrene with sulfonic acid groups (PS-SO3H), at 60°C. The PVA-SO3H catalyst showed higher catalytic activity than the PS-SO3H one. In order to optimize the reaction conditions, different parameters were studied. An increase of waste cooking oil conversion into fatty acid methyl esters with the amount of PVA-SO3H was observed. When the transesterification and esterification of WCO was carried out with ethanol over PVA-SO3H, at 60°C, a decrease of biodiesel production was also observed. The WCO conversion into fatty acid ethyl ester increased when the temperature was increased from 60 to 80°C. When different amounts of free fatty acids were added to the reaction mixture, a slight increase on the conversion was observed. The PVASO3H catalyst was reused and recycled with negligible loss in the activity.

Energy consumption and energy efficiency in olive oil mills: case studies in Portugal and Spain in the frame of TESLA project

TESLA project (Transfering Energy Save Laid on Agroindustry) financed by the European Commission, had the main goals of evaluating the energy consumption and to identify the best available practices to improve energy efficiency in key agro-food sectors, such as the olive oil mills. A general analysis of energy consumptions allowed identifying the partition between electrical and thermal energy (approximately 50%) and the production processes responsible for the higher energy consumptions, as being the in the mill and paste preparation and the phases separation. Some measures for reducing energy waste and for improving energy efficiency were identified and the impact was evaluated by using the TESLA tool developed by Circe and available at the TESLA website.

Economic feasibility analysis of the implementation of a high value-added molecule extraction system in an olive oil mill

The production of olive oil generates several by-products that can be seen as an additional business opportunity. Among them are the olive pits, already used for heat and/or electricity generation in some mills. They contain compounds that are commercially very interesting and, if recovered, contribute to the sustainability of the olive mills. The work presented in this paper is a preliminary evaluation of the economic feasibility of implementing a system based on a batch prototype with 1 m3 for the extraction of high value-added bioactive molecules from olive pits that are separated during the production of virgin olive oil. For the analysis, a small representative olive mill in Portugal was considered and the traditional Discounted Cash Flow Method was applied. Based on the assumptions made, the simple payback for implementation a system for the extraction of value-added molecules from the olive pits is around 7 years.