A novel Compound Elliptical-type Concentrator for parabolic primaries with tubular receiver

The Parabolic Trough (PT) is the most used concentrator in CSP (Concentrated Solar Power). However, this concentrator technology is facing a significant challenge to increase its overall efficiency and cost-effectiveness. Meanwhile, other low-cost solutions such as Fresnel concentrators are also being perceived as potentially attractive. In order to achieve the lower cost goal, new optical solutions can be considered, in parallel with improvements coming, for instance, through the use of new materials or manufacturing solutions. But conventional PTs can still be improved to yield, for instance, higher concentration values, a possible starting point for higher conversion efficiency. These new solutions, in turn, can also be useful for other technologies and applications (Fresnel Concentrators, Central Tower Receivers, etc.). However it is easier to develop and test these solutions in conjunction with parabolic primaries (continuum primary). And that is the topic of this paper: to present a new Compound Elliptical-type Concentrator for a parabolic primary with a tubular receiver. A comparison is made between this new concentrator and two other concentrators (a conventional PT concentrator and a XX SMS (Simultaneous Multiple Surface) concentrator), as well as a calculation of the total amount of collected energy (kW h) for a particular location, Faro (Portugal). The paper ends with a discussion of the results obtained, their impact and possible applications in the future.

Materiais electrocrómicos e mecaelectroquímicos: contextualização e experimentação na disciplina de química do 12º ano

Durante os últimos 1O anos, em particular, tem-se assistido à descoberta e desenvolvimento de materiais com propriedades únicas e potencialmente úteis em vários domínios da Ciência e Tecnologia. Quer seja na área das Ciências Biomédicas e do Ambiente, na área das Novas Tecnologias de Informação e Comunicação ou nas Novas Tecnologias relacionadas com sistemas de Conversão e Armazenamento de Energia Eléctrica, encontram-se inúmeros exemplos de Novos Materiais com propriedades muito interessantes, e cujas aplicações inovadoras podem revolucionar o nosso Mundo. O presente trabalho é uma proposta de contextualização e experimentação do tema "Materiais Electrocrómicos e Mecaelectroquímicos" no Programa de Química de 12° Ano, nomeadamente na terceira Unidade - Plásticos, Vidros e Novos Materiais. Neste, é apresentada uma sub-unidade que possa integrar a unidade referida. Faz-se especial referência às aplicações dos polímeros condutores, que pela sua inovação e actualidade tomam a leccionação do tema mais apelativa, interessante e facilitadora de uma literacia científica. São apresentadas experiências laboratoriais demonstrativas e elucidativas do tema em questão. Como forma de apoiar a leccionação do referido tema, é apresentada a proposta de uma animação gráfica animada em Power Point. ABSTRACT: During the past 1O years, in particular, it has witnessed to the discovery and development of materials with unique properties and potentially useful in various fields of Science and Technology. There are numerous examples of new materials in different areas, such as Biomedical, Energy and Environmental Sciences and New information and Communication Technologies, with very interesting properties, and whose innovative applications can have an outstanding impact in our world. This dissertation is a proposal of contextualization and experimentation of theme "Electrochromic Materials and Electrochemical Artificial Muscles" in the Program of Chemistry, in 12th year, particularly in the third unit - Plastics, Glass and New Materials. lt will present a sub-unit that can integrate the unit above. The definitions and some applications of the Electrochromic Materials and Electrochemical Artificial Muscles are showed. Demonstrative and illustrative laboratory experiments of the theme are proposed. ln order to support the teaching of that subject, it is presented an animated graphical presentation in Power Point.

O engenheiro Adriano Monteiro e a utilização do ferro na reconversão e refuncionalização de espaços em Évora: o caso do Palácio D. Manuel e dos Paços do Concelho

Resumo A partir da segunda metade do século XIX e XX assistiu-se à introdução de novos materiais, como o ferro fundido, o aço e o vidro, na remodelação ou construção de edifícios que procuravam dar resposta às novas necessidades de gestão urbana e de criação de espaços de lazer e sociabilidade. Nestas intervenções, que ficaram marcadas pela arquitectura do ferro, os engenheiros, grupo profissional detentor de competências técnicas que os habilitavam a trabalhar com estes materiais, tiveram um papel determinante. Na cidade de Évora a ligação entre a utilização de novos materiais e os engenheiros, é visível no papel que o Engenheiro Adriano Monteiro teve na reconversão do Palácio D. Manuel e na remodelação do edifício dos Paços do Concelho. Palavras-chave: Engenheiro, Arquitectura do Ferro, Évora, Palácio D. Manuel, Paços do Concelho Abstract From the second half of the nineteenth century onwards, there was the introduction of new materials, such as cast iron, steel and glass, in the remodeling or in the construction of buildings that sought to satisfy the new needs of urban management and the creation of leisure spaces and sociability. In these interventions that were marked by the iron architecture, the engineers, a professional group with technical skills that enabled them to work with these materials, played a decisive role. In the city of Évora this link between the utilization of new materials and engineers, is visible in the role that engineer Adriano Monteiro had in the conversion of the D. Manuel Palace and in the remodeling of the Town Hall building. Keywords: Engineers, Iron Architecture, Évora, D. Manuel Palace, City Hall

A new look into the archaeological materials from the Museum of Évora, Portugal – the case study of the Zambujeiro Dolmen

This paper presents the results of a multidisciplinary and multi-analytical study of the amber beads, red pigments, lithic arrowheads and selected ceramics from the Museum of Évora’s collection of the Zambujeiro Dolmen. Amber beads were studied by Attenuated Total Reflectance Fourier Transformed Infrared Spectroscopy (ATR-FTIR) and Pyrolysis coupled to Gas Chromatography and Mass Spectrometry (Py-GC/MS) to confirm their chemical nature and provenance. The red pigments, frequently found in funerary Neolithic context of the Iberian Peninsula, were studied with micro-Raman, and Scanning Electron Microscopy coupled to Energy Dispersive X-Ray Spectroscopy (SEM-EDS) to identify their chemical nature and provenance. The lithic arrowheads were analysed by portable X-Ray Fluorescence (p-XRF), micro X-Ray Diffraction (XRD), SEM-EDS, and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). The ceramic materials were studied to infer provenance and production technology by p-XRF, XRD and SEM-EDS; ceramic contents were evaluated by GC/MS. The studies have shown that while some materials travel hundreds or thousands of kilometres to arrive to the Zambujeiro Dolmen, local materials were also used in the items selected by the communities to honour their deceased.

Development of a sheep vertebroplasty model for bioceramic materials assessment

Development of a sheep vertebroplasty model for bioceramic materials assessment Sheep has been widely used as an animal orthopaedic model. Although several studies report anatomic and biomechanical similarities as well as distinctions of ovine lumbar vertebrae when compared to human’s, only a few studies describe its actual use as a vertebroplasty model. Due to distinct anatomic features, sheep lumbar vertebrae pose a challenge when developing a minimally invasive procedure for vertebroplasty material testing, under conditions meant to be the most similar to clinical procedure. The present work describes the development of an appropriate surgical percutaneous vertebroplasty model in the lumbar spine of sheep, applicable in vivo, that minimizes the risk of post-surgical complications. This model was mechanically evaluated ex-vivo regarding its safety, and used to evaluate the injectability and radiopacity of two new bioceramic materials when compared to a commercial bioceramic bone substitute (Cerament™ SpineSupport). Microtomography techniques helped in the development of the model and results assessment. Under fluoroscopic guidance, a defect was created through a bilateral modified parapedicular access in the cranial hemivertebrae of 30 sheep lumbar vertebrae (L4, L5 and L6). The manually drilled defect had an average volume of 1209 ±226 mm3 and allowed the novel materials injection through a standardized injection cannula placed in one of the entrance points. Adequate defect filling was observed with all tested materials. No mechanical failure was observed under loads higher than the physiological.