Effect of different doses of post-emergence-applied iodosulfuron on weed control and grain yield of malt barley (Hordeum distichum L.), under Mediterranean conditions

A study was carried out over a two year period (2009/2010 and 2012/2013) on an experimental farm in the Alentejo region (Beja), in southern Portugal where rainfed malt barley (Hordeum distichum L.) is sown at the end of autumn or beginning of winter (November– December). The aim of this experiment was to study the efficiency of the herbicide iodosulfuron-methyl-sodium to control post-emergence broadleaved weeds in this cereal crop. The malt barley crop was established using no-till farming. This technology provides the necessary machine bearing capacity of the soil to assure the post-emergence application of herbicides at two diferente weed development stages. The herbicide iodosulfuron-methyl-sodium was applied at three doses (5.0, 7.5, and 10.0 g a. i. · ha–1) and at two different broadleaved weed development stages (3 to 4 and 6 to 7 pairs of leaves), that also corresponded to two diferente crop development stages (beginning of tillering and complete tillering). The results indicated that early herbicide application timing provided a significantly higher efficiency for all the applied herbicide doses, but this better weed control was not reflected in a higher crop grain yield. The lack of a higher crop grain yield was probably due to a crop phytotoxicity of the herbicide, when used at an early application timing.

Modeling, control and field tests on an experimental irrigation canal

Irrigation canals are complex hydraulic systems difficult to control. Many models and control strategies have already been developed using linear control theory. In the present study, a PI controller is developed and implemented in a brand new prototype canal and its features evaluated experimentally. The base model relies on the linearized Saint-Venant equations which is compared with a reservoir model to check its accuracy. This technique will prove its capability and versatility in tuning properly a controller for this kind of systems.

Bidding and Optimization Strategies for Wind-PV Systems in Electricity Markets

The variability in non-dispatchable power generation raises important challenges to the integration of renewable energy sources into the electricity power grid. This paper provides the coordinated trading of wind and photovoltaic energy to mitigate risks due to the wind and solar power variability, electricity prices, and financial penalties arising out the generation shortfall and surplus. The problem of wind-photovoltaic coordinated trading is formulated as a linear programming problem. The goal is to obtain the optimal bidding strategy that maximizes the total profit. The wind-photovoltaic coordinated operation is modeled and compared with the uncoordinated operation. A comparison of the models and relevant conclusions are drawn from an illustrative case study of the Iberian day-ahead electricity market.

Bidding and Optimization Strategies for Wind-PV Systems in Electricity Markets Assisted by CPS

The variability in non-dispatchable power generation raises important challenges to the integration of renewable energy sources into the electricity power grid. This paper provides the coordinated trading of wind and photovoltaic energy assisted by a cyber-physical system for supporting management decisions to mitigate risks due to the wind and solar power variability, electricity prices, and financial penalties arising out the generation shortfall and surplus. The problem of wind-photovoltaic coordinated trading is formulated as a stochastic linear programming problem. The goal is to obtain the optimal bidding strategy that maximizes the total profit. The wind-photovoltaic coordinated operation is modelled and compared with the uncoordinated operation. A comparison of the models and relevant conclusions are drawn from an illustrative case study of the Iberian day-ahead electricity market.

Control and Supervision of Wind Energy Conversion Systems

This paper is about a PhD thesis and includes the study and analysis of the performance of an onshore wind energy conversion system. First, mathematical models of a variable speed wind turbine with pitch control are studied, followed by the study of different controller types such as integer-order controllers, fractional-order controllers, fuzzy logic controllers, adaptive controllers and predictive controllers and the study of a supervisor based on finite state machines is also studied. The controllers are included in the lower level of a hierarchical structure composed by two levels whose objective is to control the electric output power around the rated power. The supervisor included at the higher level is based on finite state machines whose objective is to analyze the operational states according to the wind speed. The studied mathematical models are integrated into computer simulations for the wind energy conversion system and the obtained numerical results allow for the performance assessment of the system connected to the electric grid. The wind energy conversion system is composed by a variable speed wind turbine, a mechanical transmission system described by a two mass drive train, a gearbox, a doubly fed induction generator rotor and by a two level converter.

Optimização das condições de cultura da Saccharomyces Cerevisiae e de outros fungos produtores de oligossacáridos

Este estudo envolve o controlo e a optimização das condições de culturas dos microrganismos: Saccharomyces cerevisiae CCMI 396, S. cerevisiae v. lab., Aspergillus oryzae CCMI 125, Aspergillus japonicus CCMI 443, Fusarium oxysporum CCMI 866, Aspergillus niger CCMI 296 com vista à produção de oligossacáridos. Determinaram-se os parâmetros característicos das culturas de duas diferentes estirpes de Saccharomyces com diferentes fontes de carbono e em diferentes condições ambientais. O perfil de crescimento da S. cerevisiae CCMI 396 foi semelhante nos diferentes meios de cultura estudados, sendo a velocidade específica de crescimento mais elevada no meio com glucose a pH 5 e a 30°C (0,36h-1). A S. cerevisiae v. lab. Teve velocidade específica de crescimento idêntica nas mesmas condições da outra estirpe, no entanto, o perfil de crescimento foi diferente nos outros meios de cultura. Estudou-se o efeito da adição de sumo de laranja ou de tomate ao meio de cultura com sacarose e avaliou-se a evolução glucídica no meio de cultura durante o ensaio por HPLC com detector RI. Determinou-se a frutosiltransferase no sobrenadante e na fracção intracelular e determinou-se a evolução dos oligossacáridos. Numa segunda parte deste trabalho efectuaram-se culturas dos quatro fungos filamentosos com vista a avaliar a capacidade de produção, nomeadamente, de fruto­oligassacáridos. Os resultados mostraram que a espécie Aspergillus japonicus CCMI 443 originou, nas mesmas condições de cultura, valores superiores, sendo a percentagem de produção FOStotais/GluCtotais de 61% para as enzimas intracelulares e 40% para as enzimas no sobrenadante. ABSTRACT; This study involves control and optimization of the cultures of microorganisms: Saccharomyces cerevisiae CCMI 396, S. cerevisiae v. lab., Aspergillus oryzae CCMI 125, Aspergillus japonicus CCMI 443, Fusarium oxysporum CCMI 866, Aspergillus níger CCMI 296 for oligosaccharides production. Were determined the parameters characteristic of the cultures of two different strains of Saccharomyces with different sources of carbon and in different environmental conditions. The growth profile of S. cerevisiae CCMI 396 was similar in different cultures media, but the highest specific growth was obtained in a medium with glucose, pH 5, at 30°C (0.36h-1). S. cerevisiae v. lab. had similar growth profile in a medium with glucose but with others culture media was different. We studied the effect of adding orange juice or tomato to the culture medium with sucrose and evaluated the evolution glucidic in the culture medium during the test by HPLC with RI detector. Fructosyltransferase was determined in the extracellular and the intracellular fractions and determined the evolution of oligosaccharides. ln the second part of this work were carried out cultures of four filamentous fungi in order to assess production capacity, in particular, fructoligosaccharides. The results showed that the specie Aspergillus japonicus CCMI 443 originated in the same culture conditions, higher values and the percentage of production FOStotal/Guctotal of 61% for intracellular enzymes and 40% for extracellular enzymes.

Modelling and PI Control of an Irrigation Canal

The main goal of this paper is to expose and validate a methodology to design efficient automatic controllers for irrigation canals, based on the Saint-Venant model. This model-based methodology enables to design controllers at the design stage (when the canal is not already built). The methodology is applied on an experimental canal located in Portugal. First the full nonlinear PDE model is calibrated, using a single steady-state experiment. The model is then linearized around a functioning point, in order to design linear PI controllers. Two classical control strategies are tested (local upstream control and distant downstream control) and compared on the canal. The experimental results show the effectiveness of the model.

SCADA configuration and control modes implementation on an experimental water supply canal

In the last years, digital controllers became a very interesting alternative (low costs and higher accuracy) to the analogue or to hydrodynamic traditional controllers in water supply canal automation, in order to match water supply to water demands. This kind of hydraulic systems needs particular research for control applications because they are big scale systems, open and characterized by big delays and great inertia. This paper presents several digital control modes tested in an experimental canal that will be used as a research platform on the automatic canal control domain. The canal operation and their control modes selection are supervised by a SCADA system developed and configured for this particular canal.

Special Issue “ Fluid Flow, Energy Transfer and Design”

Fluids are important because of their preponderance in our lives. Fluid mechanics touches almost every aspect of our daily lives, and it plays a central role in many branches of science and technology. Therefore, it is a challenging and exciting field of scientific activity due to the complexity of the subject studied and the breadth of the applications. The quest for advances in fluid mechanics, as in other scientific fields, emerge from analytical, computational (CFD) and experimental studies. The improvement in our ability to describe, predict and control the phenomena played (and plays) key roles in the technological breakthroughs. The present theme issue of “Fluid and Heat Flow: Simulation and Optimization” collects a selection of papers. selection of papers presented at Special Session “Fluid Flow, Energy Transfer and Design”