Assessment of the spatial variability in Tall wheatgrass forage using LANDSAT 8 satellite imagery to delineate potential management zones

Little information is available on the degree of within-field variability of potential production of Tall wheatgrass (Thinopyrum ponticum) forage under unirrigated conditions. The aim of this study was to characterize the spatial variability of the accumulated biomass (AB) without nutritional limitations through vegetation indexes, and then use this information to determine potential management zones. A 27-×-27-m grid cell size was chosen and 84 biomass sampling areas (BSA), each 2 m(2) in size, were georeferenced. Nitrogen and phosphorus fertilizers were applied after an initial cut at 3 cm height. At 500 °C day, the AB from each sampling area, was collected and evaluated. The spatial variability of AB was estimated more accurately using the Normalized Difference Vegetation Index (NDVI), calculated from LANDSAT 8 images obtained on 24 November 2014 (NDVInov) and 10 December 2014 (NDVIdec) because the potential AB was highly associated with NDVInov and NDVIdec (r (2) = 0.85 and 0.83, respectively). These models between the potential AB data and NDVI were evaluated by root mean squared error (RMSE) and relative root mean squared error (RRMSE). This last coefficient was 12 and 15 % for NDVInov and NDVIdec, respectively. Potential AB and NDVI spatial correlation were quantified with semivariograms. The spatial dependence of AB was low. Six classes of NDVI were analyzed for comparison, and two management zones (MZ) were established with them. In order to evaluate if the NDVI method allows us to delimit MZ with different attainable yields, the AB estimated for these MZ were compared through an ANOVA test. The potential AB had significant differences among MZ. Based on these findings, it can be concluded that NDVI obtained from LANDSAT 8 images can be reliably used for creating MZ in soils under permanent pastures dominated by Tall wheatgrass.

Geomorphological constraining of tsunami (?) run-up in the Alcantarilha coastal lowland (Central Algarve, Portugal)

The Alcantarilha lowland, partly barred by a well developed barrier, including foredunes covering Pleistocene-Holocene beachrock and aeolianite, develops across the Alcantarilha infilled estuary, the beach-dune extending further SE until the Salgados lagoon. A topographic and coring survey revealed a peculiar feature at the leeward toe of the dune ridge close to the inlet area: a sandy fan with location, shape and morphology suggesting emplacement by single or multiple overwash of the barrier tip rather than tidal forcing. Its storm or tsunami origin and age are under investigation, and the only time-constrain available at present is that it should post-date ca. 6600 cal BP, the most recent in situ aeolianite (Moura et al., 2007) dated so far. METHODS, DATA SET AND RESULTS The fan boundaries are distinctive in aerial photos and satellite images: it is roughly ellipsoidal, ~200 m wide and ~300 m elongated paralleling the shoreline, rising ~ 0.9-1.2 m above the surrounding floodplain surface. Detailed topography shows that its short axis aligns with SW-NE elongated (though irregular) depressions in the dune crest, which link the beach with the fan. This could have favoured funnelling of, or erosion by, water overtopping the barrier but, in either case, the fan should correspond to extreme and abrupt event(s) of coastal flooding. 18 trenches and cores were performed in the exposed area of the fan and nearby flood plain to obtain samples and data on its sedimentology, lithostratigraphy and geometry. The fan consists of well sorted and rounded sand (Fig. 2). It thins away and wedges out landwards of the apex (located near Alc29T) where it is partly covered by dune sand. Its lower boundary is undulating and marked by textural contrast between sand (fan) and underlying mud (alluvial/lagoonal); an accumulation of marine-sourced perforated pebbles showing limited lateral continuity may pinpoint this boundary near the foredune (core Alc 25, ca. 80 m westward of profile in Fig.1); mud-balls were also observed immediately above this surface in cores and trenches. As the washover was probably emplaced in a barred lagoonal/estuarine floodplain setting, the fan’s northern outer belt is enclosed by low-energy sediments (not shown in Fig. 2).

Irrigation management with remote sensing: Evaluating irrigation requirement for maize under Mediterranean climate condition

tWater use control methods and water resources planning are of high priority. In irrigated agriculture, theright way to save water is to increase water use efficiency through better management. The present workvalidates procedures and methodologies using remote sensing to determine the water availability in thesoil at each moment, giving the opportunity for the application of the water depth strictly necessaryto optimise crop growth (optimum irrigation timing and irrigation amount). The analysis is applied tothe Irrigation District of Divor, Évora, using 7 experimental plots, which are areas irrigated by centre-pivot systems, cultivated to maize. Data were determined from images of the cultivated surface obtainedby satellite and integrated with atmosphere and crop parameters to calculate biophysical indicatorsand indices of water stress in the vegetation—Normalized Difference Vegetation Index (NDVI), Kc, andKcb. Therefore, evapotranspiration (ETc) was estimated and used to calculate crop water requirement,together with the opportunity and the amount of irrigation water to allocate. Although remote sensingdata available from satellite imagery presented some practical constraints, the study could contribute tothe validation of a new methodology that can be used for irrigation management of a large irrigated area,easier and at lower costs than the traditional FAO recommended crop coefficients method. The remotesensing based methodology can also contribute to significant saves of irrigation water.

New insight on the underdrawing of 16th Flemish-Portuguese easel paintings by combined surface analysis and microanalytical techniques

This paper focusses on the study of the underdrawings of 16th century easel paintings attributed to the workshop of the Portuguese-Flemish Master Frei Carlos. This investigation encompasses multidisciplinary research that relates the results of surface exams (infrared reflectography, standard light photography and infrared photography) with analytical investigations. The surface analysis of Frei Carlos’ underdrawings by infrared reflectography has shown heterogeneous work, revealing two different situations: (1) an abundant and expressive underdrawing, revealing a Flemish influence and (2) a simple and outlined underdrawing. This preliminary research raised an important question related to this Portuguese-Flemish workshop and to the analytical approach: Is the underdrawing's heterogeneity, as observed in the reflectograms, related to different artists or is this rather an effect that is produced due to the use of different materials in the underdrawing's execution? Consequently, if different materials were used, how can we have access to the hidden underdrawings? In order to understand the reasons for this dissemblance, chemical analysis of micro-samples collected in underdrawing areas and representing both situations were carried out by optical microscopy, micro Fourier transform infrared spectroscopy (μ-FTIR), scanning electron microscopy coupled with energy dispersive X-ray spectrometry (SEM-EDX) and micro-Raman spectroscopy (μ-Raman). Taking into account the different possibilities and practical and theoretical limitations of surface and punctual examinations in the study of easel painting underdrawings, the methodology of research was adjusted, sometimes resulting in a re-analysis of experimental results. This research shows the importance of combining multispectral surface exams and chemical analysis in the understanding of the artistic creative processes of 16th century easel paintings.