Changes in the spatial distribution of tree species in a terra firme rain forest in Brazilian Amazonia after logging.

The objective of this paper was to determine changes in the spatial distribution of tree species in a logged compared to an unlogged forest of the Tapajos National Forest in the municipality of Belterra, State of Para, Brazil, over an eight-year period. The distribution pattern was determined for trees> 5 cm dbh and, also, for trees > 30 cm dbh. The relationship (a quadrate method) discussed by McGinnis was selected to be used in this study. Forty-seven percent of species with trees > 5 cm dbh showed clumped distribution in the studied forests. Geissospermwn sericeunz Benth & Hook., Minquartia guianensis Aubl., Poureria bilocularis (H. Winkler) Bachni, Protium guacayantan Cuatrec, Sclerolobium chrysophyllunz Poepp. et Endl. and the Sapotaceae family (9 species) occurred in clumps of small trees (5 cm 5 dbh < 30 cm) and big trees (dbh > 30 cm) in both the logged and undisturbed forest. Trees in all sizes of these species certainly have aggregation characteristics in different light condition's during the whole growth-cycle. Only Sclerolobium cizzysophylltan out of fourteen species that occurred aggregated in all forest conditions was light demanding. The shade-tolerant Lecythis lurida (Miers) Mori and Manilkara huberi (Ducke) Stand!. showed also aggregated distribution for small and big trees in the unlogged forest. An aggregated distribution is not always directly correlated to abundance, considering that most of the clumped species had less than seven trees per hectare.

Root behavior of savanna species in Brazil's Pantanal wetland.

The objective of this study was to determine the maximum depth, structure, diameter and biomass of the roots of common woody species in two savanna physiognomies (savanna woodland and open woody savanna) in Brazil's Pantanal wetland. The root systems of 37 trees and 34 shrubs of 15 savanna species were excavated to measure their length and depth and estimate the total root biomass through allometric relationships with stem diameter at ground level. In general, statistical regression models between root weight and stem diameter at ground level showed a significance of P < 0.05 and R2 values close to or above 0.8. The average depths of the root system in wetland savanna woodland and open woody savanna are 0.8 ± 0.3 m and 0.7 ± 0.2 m, respectively, and differ from the root systems of savanna woody species in non-flooding areas, whose depth usually ranges from 3 to 19 m.Weattribute this difference to the adaptation of woody plant to the shallow water table, particularly during the wet season. This singularity of woody species in wetland savannas is important when considering biomass and carbon stocks for national and global carbon inventories.

Spatial scale effects of sampling on the interpolation of species distribution models in the southwestern Amazon.

Knowledge of the geographical distribution of timber tree species in the Amazon is still scarce. This is especially true at the local level, thereby limiting natural resource management actions. Forest inventories are key sources of information on the occurrence of such species. However, areas with approved forest management plans are mostly located near access roads and the main industrial centers. The present study aimed to assess the spatial scale effects of forest inventories used as sources of occurrence data in the interpolation of potential species distribution models. The occurrence data of a group of six forest tree species were divided into four geographical areas during the modeling process. Several sampling schemes were then tested applying the maximum entropy algorithm, using the following predictor variables: elevation, slope, exposure, normalized difference vegetation index (NDVI) and height above the nearest drainage (HAND). The results revealed that using occurrence data from only one geographical area with unique environmental characteristics increased both model overfitting to input data and omission error rates. The use of a diagonal systematic sampling scheme and lower threshold values led to improved model performance. Forest inventories may be used to predict areas with a high probability of species occurrence, provided they are located in forest management plan regions representative of the environmental range of the model projection area.

Plasticity in leaf-level water relations of tropical rainforest trees in response to experimental drought.

The tropics are predicted to become warmer and drier, and understanding the sensitivity of tree species to drought is important for characterizing the risk to forests of climate change. This study makes use of a long-term drought experiment in the Amazon rainforest to evaluate the role of leaf-level water relations, leaf anatomy and their plasticity in response to drought in six tree genera. The variables (osmotic potential at full turgor, turgor loss point, capacitance, elastic modulus, relative water content and saturated water content) were compared between seasons and between plots (control and through-fall exclusion) enabling a comparison between short- and long-term plasticity in traits. Leaf anatomical traits were correlated with water relation parameters to determine whether water relations differed among tissues. The key findings were: osmotic adjustment occurred in response to the long-term drought treatment; species resistant to drought stress showed less osmotic adjustment than drought-sensitive species; and water relation traits were correlated with tissue properties, especially the thickness of the abaxial epidermis and the spongy mesophyll. These findings demonstrate that cell-level water relation traits can acclimate to long-term water stress, and highlight the limitations of extrapolating the results of short-term studies to temporal scales associated with climate change.

Reducing competition in agroforestry by pruning native trees.

The degree to which pruning helps reestablish balance in agroforestry was assessed in a system established in São Carlos, São Paulo, Brazil, in 2008. Seven native tree species were planted at a density of 600 trees/ha in five strips of three rows each, and annual crops were cultivated in the 17-m crop strips between the tree strips. Competition was established after 35 months, decreasing the aboveground biomass production of corn planted close to the trees. An assessment of black oats in the dry season following tree pruning showed that the proximity of trees caused reductions in plant and panicle density, aboveground biomass production, number of grains per panicle and grain weight. Because pruning was not sufficient to maintain crop yields, tree thinning is recommended in order to minimize competition and restore conditions for adequate crop production.

Investigating genetic diversity in sapucaia using inter simple sequence repeat markers.

Sapucaia is a tree species originating from the Brazilian Amazon and is widely distributed in Brazil, especially in the mid-north region (Piauí and Maranhão states). Its seeds are rich in calories and proteins, and possess great potential for commercialization. Little is known about the genetic variability in the germplasm of most Lecythis species.

Regeneration in felling gaps after logging in Acre state, Western Amazon.

Regeneration of tree species in felling gaps were studied during the first two years following harvesting in a tropical forest in Acre state, Brazil. Felling gaps averaged 340 m2 in size, while canopy openings averaged 17%. Seedling mortality in adjacent undisturbed forest was 4.6% yr', and 59.6% yr·1 and 100% yr' in the crown and trunk zones respectively, two years after logging. Recruitment of new seedlings inthe undisturbed forest understorey averaged 462 plants ha' yr', two years after gap creation. Inthe crown zones of the gaps, recruitment of seedlings averaged 1350 ha' yr', and in the trunk zones 1392 ha' yr'. The entire seedling community in trunk zones after logging was composed of new recruits. lhere was a tendency for seedling growth rates to increase from the natural forest (0,21cm yr-1) to the crown zone (0.40cm yr'), Before gap creation, species richness and diversity and seedling density were quite similar. After gap creation a sharp decrease could be verified in the gap.zones, however the differences between gap and undisturbed forest decreased rapidly in the second year after gap creation. lhe regeneration of commercial species was not affected by gap creation apart from the increase in growth rates.

Growth of native trees in two agroforestry systems.

Agroforestry systems with eucalyptus prevail in Central and Southeast Brazil, and little information is available about systems using native trees. The aim of the present study was to evaluate the development of seven native tree species grown under two agroforestry systems. The experiment was conducted starting in 2007 in 12-hectare area in the municipality of São Carlos, São Paulo state, Brazil. The tree species planted in the two systems (a silvopastoral system and an agrisilvicultural system) were: 'capixingui' (Croton floribundus) and 'mutambo' (Guazuma ulmifolia) (tutors), 'jequitibá-branco' (Cariniana estrellensis), 'canafistula' (Peltophorum dubium) and 'ipê felpudo' (Zeyheria tuberculosa) (timber trees), and 'angico-branco' (Anadenanthera colubrina) and 'pau-jacaré' (Piptadenia gonoacantha) (N-fixing trees). Data were collected for 48 months. The results show differences among tree development, which was evaluated as growth in height and diameter, as well as sensitivity to insect and disease damage. The overall results show that the agrisilvicultural system allowed better tree development. The species with best performance in the two systems were capixingui, mutambo and canafístula. Ipê-felpudo and jequitibá-branco showed the worst results. The high variability among individuals of the same species indicates the possibility of high production advances with selective breeding of these species.

Metodologia para medição da potência necessária ao corte por um triturador florestal.

Resumo: Para execução do processo de raleamento na Caatinga é importante utilizar máquinas do tipo rotores trituradores acoplados em tratores de baixa potência, visando a diminuição de tempo e mão-de-obra dos agricultores familiares na, implantação de sistemas de exploração sustentáveis, sistemas agrossilvipastoris. Para o projeto de uma máquina que seja acessível a estes produtores, o primeiro passo é se conhecer a potência de corte necessária para a operação de raleamento. O objetivo deste trabalho foi desenvolver e avaliar uma metodologia de ensaio para medir a potência durante o corte de uma espécie arbórea, podendo assim avaliar os parâmetros a serem utilizados futuramente no projeto da máquina. Como espécie teste, utilizou-se o eucalyptus citriodora, por ser uma madeira que apresenta resistência de corte elevada e similar ao das espécies da Caatinga. Observou-se que a metodologia proposta, ao padronizar os procedimentos, permitiu adquirir de forma rápida e precisa os valores dos parâmetros de importância no projeto de máquinas destinadas a cortar e triturar espécies arbóreas. Também a utilização dos dados obtidos por meio da aplicação da metodologia, possibilitam maior confiabilidade e precisão no projeto de máquinas destinadas a este tipo de trabalho. [Methodology for obtaining the cutting power of a forest crusher]. Abstract: For executions the thinning process in Caatinga is important to use machines as Rotors Crushers coupled in low- power tractors, aimed at decrease of time and hand labor of Family Farmers in the implementation of sustainable exploration systems, agrosylvopastoral Systems. For the project for the design of a machine that is accessible these producers, the first step is knowing the cut power needed for a thinning operation. The objective of this study was to develop and evaluate a test methodology to measure the power during the cutting of a tree species and can evaluate the cutting parameters used in the future in machine design. As a test species, we used the eucalyptus citriodora, as this wood has cut high resistance and similar to Species of Caatinga. It was observed that the methodology proposal, to the standardize procedures, allows to get quickly and accurately the values of importance parameters in the design of machines designed to cut and grind tree species. Also the use of data obtained through the application of the methodology , enable greater reliability and precision in machine design intended for this type of work.