Numeric model to estimate pesticide deposition and losses from aerial spraying.

Pesticides applications have been described by many researches as a very inefficient process. In some cases, there are reports that only 0.02% of the applied products are used for the effective control of the problem. The main factor that influences pesticides applications is the droplet size formed on spraying nozzles. Many parameters affects the dynamic of the droplets, like wind, temperature, relative humidity, and others. Small droplets are biologically more active, but they are affected by evaporation and drift. On the other hand, the great droplets do not promote a good distribution of the product on the target. In this sense, associated with the risk of non target areas contamination and with the high costs involved in applications, the knowledge of the droplet size is of fundamental importance in the application technology. When sophisticated technology for droplets analysis is unavailable, is common the use of artificial targets like water-sensitive paper to sample droplets. On field sampling, water-sensitive papers are placed on the trials where product will be applied. When droplets impinging on it, the yellow surface of this paper will be stained dark blue, making easy their recognition. Collected droplets on this papers have different kinds of sizes. In this sense, the determination of the droplet size distribution gives a mass distribution of the material and so, the efficience of the application of the product. The stains produced by droplets shows a spread factor proportional to their respectives initial sizes. One of methodologies to analyse the droplets is a counting and measure of the droplets made in microscope. The Porton N-G12 graticule, that shows equaly spaces class intervals on geometric progression of square 2, are coulpled to the lens of the microscope. The droplet size parameters frequently used are the Volumetric Median Diameter (VMD) and the Numeric Median Diameter. On VMD value, a representative droplets sample is divided in two equal parts of volume, in such away one part contains droplets of sizes smaller than VMD and the other part contains droplets of sizes greater that VMD. The same process is done to obtaining the NMD, which divide the sample in two equal parts in relation to the droplets size. The ratio between VMD and NMD allows the droplets uniformity evaluation. After that, the graphics of accumulated probability of the volume and size droplets are plotted on log scale paper (accumulated probability versus median diameter of each size class). The graphics provides the NMD on the x-axes point corresponding to the value of 50% founded on the y-axes. All this process is very slow and subjected to operator error. So, in order to decrease the difficulty envolved with droplets measuring it was developed a numeric model, implemented on easy and accessfull computational language, which allows approximate VMD and NMD values, with good precision. The inputs to this model are the frequences of the droplets sizes colected on the water-sensitive paper, observed on the Porton N-G12 graticule fitted on microscope. With these data, the accumulated distribution of the droplet medium volumes and sizes are evaluated. The graphics obtained by plotting this distributions allow to obtain the VMD and NMD using linear interpolation, seen that on the middle of the distributions the shape of the curves are linear. These values are essential to evaluate the uniformity of droplets and to estimate the volume deposited on the observed paper by the density (droplets/cm2). This methodology to estimate the droplets volume was developed by 11.0.94.224 Project of the CNPMA/EMBRAPA. Observed data of herbicides aerial spraying samples, realized by Project on Pelotas/RS county, were used to compare values obtained manual graphic method and with those obtained by model has shown, with great precision, the values of VMD and NMD on each sampled collector, allowing to estimate a quantities of deposited product and, by consequence, the quantities losses by drifty. The graphics of variability of VMD and NMD showed that the quantity of droplets that reachs the collectors had a short dispersion, while the deposited volume shows a great interval of variation, probably because the strong action of air turbulence on the droplets distribution, enfasizing the necessity of a deeper study to verify this influences on drift.

Phytate-phosphorus and phytase contents on the relative weight of organs, intestinal morphometry and performance of broilers.

ABSTRACT: In order to evaluate the efficiency of phytase in diets with low and high phytate phosphorus (PP) content, as a consequence of wheat bran inclusion, on the relative weight of organs, intestinal morphometry and performance, three hundred and eighty-four male Cobb500 broilers were housed in metabolic cages. Animals were assigned into four treatments in a 2x2 factorial scheme in a randomized block design with eight replicates of 12 birds each. From 11 days of age birds received experimental diets, which consisted of: Diet low in PP; Diet low in PP with phytase (500FTU kg-1); Diet with a high PP and Diet with a high PP with phytase (500FTU kg-1). At 22 and 32 days of age two birds were slaughtered in order to collect gizzard, heart, liver, cecum, cloacal bursa, and at 32 days, a portion of the duodenum, jejunum and ileum was collected for morphometric evaluation. From 22 to 32 days of age average feed intake, average weight gain, average body weight and feed conversion ratio were also evaluated. Data were subjected to analysis of variance, fixed effects of diet and phytase and interaction between factors as well as the random block effects were tested. There was no significant interaction for the variables studied, concluding that phytase in diets with low or high phytate phosphorus content did not change the relative weight of organs, intestinal morphometrics and performance; only isolated effects were observed. RESUMO: Para avaliar a eficiência da fitase em dietas com baixo e alto teor de fósforo fítico (PP), em função da inclusão ou não do farelo de trigo, sobre o peso relativo de órgãos, morfometria intestinal e desempenho, foram alojados 384 frangos de corte, machos da linhagem Cobb500, em gaiolas metabólicas. Os animais foram distribuídos em quatro tratamentos em um arranjo fatorial 2x2 em delineamento de blocos casualizados com oito repetições e 12 aves por unidade experimental (UE). A partir de 11 dias de idade as aves receberam as dietas experimentais, que consistiram em: Dieta com baixo teor de PP; Dieta com baixo teor de PP com fitase (500FTU kg-1); Dieta com alto teor de PP e Dieta com alto teor de PP com fitase (500FTU kg-1). Aos 22 e 32 dias de idade foram abatidas duas aves por UE para coletar a moela, coração, fígado, ceco, bolsa cloacal, e aos 32 dias foi coletada uma porção do duodeno, jejuno e íleo para avaliação da morfometria. No período de 22 a 32 dias de idade foram avaliados o consumo médio de ração, ganho de peso médio, peso médio corporal e a conversão alimentar. Os dados foram submetidos à análise de variância, onde foram testados os efeitos fixos de dieta e fitase e a interação entre os fatores, bem como o efeito aleatório de bloco. Não foi observada interação significativa para nenhuma das variáveis estudadas, concluindo-se que a fitase em dietas com baixo ou alto de PP não altera o peso relativo dos órgãos, a morfometria intestinal e o desempenho, apenas efeitos isolados foram observados.