Pervasive technology and public transport : opportunities beyond telematics

The advancements of technology in the field of public transport have been considerable. Information Technology (IT) has made the dissemination of information effortless, contributing to reduced perceived waiting time, increased sense of security, and value for money. Nevertheless, and in light of the ever more obvious widespread presence of powerful mobile devices, it seems that the use of technology may be geared towards supplementary services other than telematics. Looking at it from a passenger’s perspective, this article provides an overview of what IT-based services are currently offered in public transport and what is their assessed impact. We finalise by putting forward possible directions that future services might follow, and stress out the necessity to come up with frameworks that enable for the impact assessment on service quality and customer satisfaction.

A robust reactive scheduling model for intensive care units

The ICU is an integral part of any hospital and is under great load from patient arrivals as well as resource limitations. Scheduling of patients in the ICU is complicated by the two general types; elective surgery and emergency arrivals. This complicated situation is handled by creating a tentative initial schedule and then reacting to uncertain arrivals as they occur. For most hospitals there is little or no flexibility in the number of beds that are available for use now or in the future. We propose an integer programming model to handle a parallel machine reacting system for scheduled and unscheduled arrivals.

Dynamic analysis of on-board mass data to determine tampering in heavy vehicle on-board mass systems

Transport Certification Australia Limited, jointly with the National Transport Commission, has undertaken a project to investigate the feasibility of on-board mass monitoring (OBM) devices for regulatory purposes. OBM increases jurisdictional confidence in operational heavy vehicle compliance. This paper covers technical issues regarding potential use of dynamic data from OBM systems to indicate that tampering has occurred. Tamper-evidence and accuracy of current OBM systems needed to be determined before any regulatory schemes were put in place for its use. Tests performed to determine potential for, and ease of, tampering. An algorithm was developed to detect tamper events. Its results are detailed.

Advancing the meaning of nursing and technology

Technology and Nursing Practice explains and critically engages with the practice implications of technology for nursing. It takes a broad view of technology, covering not only health informatics, but also 'tele-nursing' and the use of equipment in clinical practice.

Heavy vehicle suspensions : testing and analysis

Transport regulators consider that, with respect to pavement damage, heavy vehicles (HVs) are the riskiest vehicles on the road network. That HV suspension design contributes to road and bridge damage has been recognised for some decades. This thesis deals with some aspects of HV suspension characteristics, particularly (but not exclusively) air suspensions. This is in the areas of developing low-cost in-service heavy vehicle (HV) suspension testing, the effects of larger-than-industry-standard longitudinal air lines and the characteristics of on-board mass (OBM) systems for HVs. All these areas, whilst seemingly disparate, seek to inform the management of HVs, reduce of their impact on the network asset and/or provide a measurement mechanism for worn HV suspensions. A number of project management groups at the State and National level in Australia have been, and will be, presented with the results of the project that resulted in this thesis. This should serve to inform their activities applicable to this research. A number of HVs were tested for various characteristics. These tests were used to form a number of conclusions about HV suspension behaviours. Wheel forces from road test data were analysed. A “novel roughness” measure was developed and applied to the road test data to determine dynamic load sharing, amongst other research outcomes. Further, it was proposed that this approach could inform future development of pavement models incorporating roughness and peak wheel forces. Left/right variations in wheel forces and wheel force variations for different speeds were also presented. This led on to some conclusions regarding suspension and wheel force frequencies, their transmission to the pavement and repetitive wheel loads in the spatial domain. An improved method of determining dynamic load sharing was developed and presented. It used the correlation coefficient between two elements of a HV to determine dynamic load sharing. This was validated against a mature dynamic loadsharing metric, the dynamic load sharing coefficient (de Pont, 1997). This was the first time that the technique of measuring correlation between elements on a HV has been used for a test case vs. a control case for two different sized air lines. That dynamic load sharing was improved at the air springs was shown for the test case of the large longitudinal air lines. The statistically significant improvement in dynamic load sharing at the air springs from larger longitudinal air lines varied from approximately 30 percent to 80 percent. Dynamic load sharing at the wheels was improved only for low air line flow events for the test case of larger longitudinal air lines. Statistically significant improvements to some suspension metrics across the range of test speeds and “novel roughness” values were evident from the use of larger longitudinal air lines, but these were not uniform. Of note were improvements to suspension metrics involving peak dynamic forces ranging from below the error margin to approximately 24 percent. Abstract models of HV suspensions were developed from the results of some of the tests. Those models were used to propose further development of, and future directions of research into, further gains in HV dynamic load sharing. This was from alterations to currently available damping characteristics combined with implementation of large longitudinal air lines. In-service testing of HV suspensions was found to be possible within a documented range from below the error margin to an error of approximately 16 percent. These results were in comparison with either the manufacturer’s certified data or test results replicating the Australian standard for “road-friendly” HV suspensions, Vehicle Standards Bulletin 11. OBM accuracy testing and development of tamper evidence from OBM data were detailed for over 2000 individual data points across twelve test and control OBM systems from eight suppliers installed on eleven HVs. The results indicated that 95 percent of contemporary OBM systems available in Australia are accurate to +/- 500 kg. The total variation in OBM linearity, after three outliers in the data were removed, was 0.5 percent. A tamper indicator and other OBM metrics that could be used by jurisdictions to determine tamper events were developed and documented. That OBM systems could be used as one vector for in-service testing of HV suspensions was one of a number of synergies between the seemingly disparate streams of this project.

Tamper evidence for heavy vehicle on board mass systems

On-board mass (OBM) monitoring devices on heavy vehicles (HVs) have been tested in a national programme jointly by Transport Certification Australia Limited and the National Transport Commission. The tests were for, amongst other parameters, accuracy and tamper-evidence. The latter by deliberately tampering with the signals from OBM primary transducers during the tests. The OBM feasibility team is analysing dynamic data recorded at the primary transducers of OBM systems to determine if it can be used to detect tamper events. Tamper-evidence of current OBM systems needs to be determined if jurisdictions are to have confidence in specifying OBM for HVs as part of regulatory schemes. An algorithm has been developed to detect tamper events. The results of its application are detailed here.

On-board mass monitoring of heavy vehicles : results of testing program

The Transport Certification Australia on-board mass feasibility project is testing various on-board mass devices in a range of heavy vehicles (HVs). Extensive field tests of on-board mass measurement systems for HVs have been conducted during 2008. These tests were of accuracy, robustness and tamper-evidence of heavy vehicle on-board mass telematics. All the systems tested showed accuracies within approximately +/- 500 kg of gross combination mass or approximately +/- 2% of the attendant weighbridge reading. Analysis of the dynamic data also showed encouraging results and has raised the possibility of use of such dynamic information in tamper evidence in two areas. This analysis was to determine if the use of averaged dynamic data could identify potential tampering or incorrect operating procedures as well as the possibility of dynamic measurements flagging a tamper event by the use of metrics including a tampering index (TIX). Technical and business options to detect tamper events will now be developed during implementation of regulatory OBM system application to Australian heavy vehicles (HVs).

Designing for Awareness: An Experience-focused HCI Perspective

Within Human-Computer Interaction (HCI) and Computer Supported Cooperative Work (CSCW) research, the notion of technologically-mediated awareness is often used for allowing relevant people to maintain a mental model of activities, behaviors and status information about each other so that they can organize and coordinate work or other joint activities. The initial conceptions of awareness focused largely on improving productivity and efficiency within work environments. With new social, cultural and commercial needs and the emergence of novel computing technologies, the focus of technologically-mediated awareness has extended from work environments to people’s everyday interactions. Hence, the scope of awareness has extended from conveying work related activities to people’s emotions, love, social status and other broad range of aspects. This trend of conceptualizing HCI design is termed as experience-focused HCI. In my PhD dissertation, designing for awareness, I have reported on how we, as HCI researchers, can design awareness systems from experience-focused HCI perspective that follow the trend of conveying awareness beyond the task-based, instrumental and productive needs. Within the overall aim to design for awareness, my research advocates ethnomethodologically-informed approaches for conceptualizing and designing for awareness. In this sense, awareness is not a predefined phenomenon but something that is situated and particular to a given environment. I have used this approach in two design cases of developing interactive systems that support awareness beyond task-based aspects in work environments. In both the cases, I have followed a complete design cycle: collecting an in-situ understanding of an environment, developing implications for a new technology, implementing a prototype technology to studying the use of the technology in its natural settings.

Being social @ work: designing for playfully mediated social awareness in work environments

Awareness within work environments should not be seen limited to important work-related information, activities and relationships. Mediating somewhat casual and engaging encounters related to non-work issues could also lead to meaningful and pleasurable experiences. This paper explores a design approach to support playfully mediated social awareness within an academic environment. Using ethnographic exploration and understanding the current and aspired practices, we provide details of two broad (and some times overlapping) categories of interaction for supporting and enhancing playfully mediated social awareness amongst staff members: 1) Self-Reflections and 2) Casual Encounters. We implement these two categories of interaction in an intelligent, asynchronous, large screen display called Panorama, for the staff room of our computer science department. Panorama attempts to mediate non-critical, non-work related information about the staff-members in an engaging manner to enhance social awareness within the department. We particularly emphasize on the soft design issues like reflections, belonging, care, pleasure and playfulness utilized in our design approach. The result of a two-phase assessment study suggests that our conceptualization of social awareness and the Panorama application has the potential to be easily incorporated into our academic environment.

Theatre, networked performance, and notions of ‘democratised’ spectatorship

The potential to cultivate new relationships with spectators has long been cited as a primary motivator for those using digital technologies to construct networked or telematics performances or para-performance encounters in which performers and spectators come together in virtual – or at least virtually augmented – spaces and places. Today, with Web 2.0 technologies such as social media platforms becoming increasingly ubiquitous, and increasingly easy to use, more and more theatre makers are developing digitally mediated relationships with spectators. Sometimes for the purpose of an aesthetic encounter, sometimes for critical encounter, or sometimes as part of an audience politicisation, development or engagement agenda. Sometimes because this is genuinely an interest, and sometimes because spectators or funding bodies expect at least some engagement via Facebook, Twitter or Instagram. In this paper, I examine peculiarities and paradoxes emerging in some of these efforts to engage spectators via networked performance or para-performance encounters. I use examples ranging from theatre, to performance art, to political activism – from ‘cyberformaces’ on Helen Varley Jamieson’s Upstage Avatar Performance Platform, to Wafaa Bilal’s Domestic Tension installation where spectators around the world could use a webcam in a chat room to target him with paintballs while he was in residence in a living room set up in a gallery for a week, as a comment on use of drone technology in war, to Liz Crow’s Bedding Out where she invited people to physically and virtually join her in her bedroom to discuss the impact of an anti-disabled austerity politics emerging in her country, to Dislife’s use of holograms of disabled people popping up in disabled parking spaces when able bodied drivers attempted to pull into them, amongst others. I note the frequency with which these performance practices deploy discourses of democratisation, participation, power and agency to argue that these technologies assist in positioning spectators as co-creators actively engaged in the evolution of a performance (and, in politicised pieces that point to racism, sexism, or ableism, pushing spectators to reflect on their agency in that dramatic or daily-cum-dramatic performance of prejudice). I investigate how a range of issues – from the scenographic challenges in deploying networked technologies for both participant and bystander audiences others have already noted, to the siloisation of aesthetic, critical and audience activation activities on networked technologies, to conventionalised dramaturgies of response informed by power, politics and impression management that play out in online as much as offline performances, to the high personal, social and professional stakes involved in participating in a form where spectators responses are almost always documented, recorded and re-represented to secondary and tertiary sets of spectators via the circulation into new networks social media platforms so readily facilitate – complicate discourses of democratic co-creativity associated with networked performance and para-performance activities.