A Low Cost Controller Board for Teaching Robotics

This paper presents the Smarty Board; a new micro-controller board designed specifically for the robotics teaching needs of Australian schools. The primary motivation for this work was the lack of commercially available and cheap controller boards that would have all their components including interfaces on a single board. Having a single board simplifies the construction of programmable robots that can be used as platforms for teaching and learning robotics. Reducing the cost of the board as much as possible was one of the main design objectives. The target user groups for this device are the secondary and tertiary students, and hobbyists. Previous studies have shown that equipment cost is one of the major obstacles for teaching robotics in Australia. The new controller board was demonstrated at high-school seminars. In these demonstrations the new controller board was used for controlling two robots that we built. These robots are available as kits. Given the strong demand from high-school teachers, new kits will be developed for the next robotic Olympiad to be held in Australia in 2006.

Wireless sensor devices for animal tracking and control

This paper describes some new wireless sensor hardware developed for pastoral and environmental applications. From our early experiments with Mote hardware we were inspired to develop our devices with improved radio range, solar power capability, mechanical and electrical robustness, and with unique combinations of sensors. Here we describe the design and evolution of a small family of devices: radio/processor board, a soil moisture sensor interface, and a single board multi-sensor unit for animal tracking experiments.

A comprehensive dual-scale wood torrefaction model : application to the analysis of thermal run-away in industrial heat treatment processes

A dual-scale model of the torrefaction of wood was developed and used to study industrial configurations. At the local scale, the computational code solves the coupled heat and mass transfer and the thermal degradation mechanisms of the wood components. At the global scale, the two-way coupling between the boards and the stack channels is treated as an integral component of the process. This model is used to investigate the effect of the stack configuration on the heat treatment of the boards. The simulations highlight that the exothermic reactions occurring in each single board can be accumulated along the stack. This phenomenon may result in a dramatic eterogeneity of the process and poses a serious risk of thermal runaway, which is often observed in industrial plants. The model is used to explain how thermal runaway can be lowered by increasing the airflow velocity, the sticker thickness or by gas flow reversal.

Better to light a single candle than to curse the darkness : promoting law student well-being through a first year law subject

Australian law teachers are increasingly recognising that psychological distress is an issue for our students. This article describes how the Queensland University of Technology Law School is reforming its curriculum to promote student psychological well-being. Part I of the article examines the literature on law student psychological distress in Australia. It is suggested that cross-sectional and longitudinal studies undertaken in Australia provide us with different, but equally important, information with respect to law student psychological well-being. Part II describes a subject in the QUT Law School - Lawyering and Dispute Resolution – which has been specifically designed as one response to declines in law student psychological well-being. Part III then considers two key elements of the design of the subject: introducing students to the idea of a positive professional identity, and introducing students to non-adversarial lawyering and the positive role of lawyers in society as dispute resolvers. These two areas of focus specifically promote law student psychological well-being by encouraging students to engage with elements of positive psychology – in particular, hope and optimism.

Predicting single-vehicle fatal crashes for two-lane rural highways in Southeastern United States

The rural two-lane highway in the southeastern United States is frequently associated with a disproportionate number of serious and fatal crashes and as such remains a focus of considerable safety research. The Georgia Department of Transportation spearheaded a regional fatal crash analysis to identify various safety performances of two-lane rural highways and to offer guidance for identifying suitable countermeasures with which to mitigate fatal crashes. The fatal crash data used in this study were compiled from Alabama, Georgia, Mississippi, and South Carolina. The database, developed for an earlier study, included 557 randomly selected fatal crashes from 1997 or 1998 or both (this varied by state). Each participating state identified the candidate crashes and performed physical or video site visits to construct crash databases with enhance site-specific information. Motivated by the hypothesis that single- and multiple-vehicle crashes arise from fundamentally different circumstances, the research team applied binary logit models to predict the probability that a fatal crash is a single-vehicle run-off-road fatal crash given roadway design characteristics, roadside environment features, and traffic conditions proximal to the crash site. A wide variety of factors appears to influence or be associated with single-vehicle fatal crashes. In a model transferability assessment, the authors determined that lane width, horizontal curvature, and ambient lighting are the only three significant variables that are consistent for single-vehicle run-off-road crashes for all study locations.

Student engagement with an ePortfolio : a case study of pre-service education students

The emergence of ePortfolios is relatively recent in the university sector as a way to engage students in their learning and assessment, and to produce records of their accomplishments. An ePortfolio is an online tool that students can utilise to record, catalogue, retrieve and present reflections and artefacts that support and demonstrate the development of graduate students’ capabilities and professional standards across university courses. The ePortfolio is therefore considered as both process and product. Although ePortfolios show promise as a useful tool and their uptake has grown, they are not yet a mainstream higher education technology. To date, the emphasis has been on investigating their potential to support the multiple purposes of learning, assessment and employability, but less is known about whether and how students engage with ePortfolios in the university setting. This thesis investigates student engagement with an ePortfolio in one university. As the educational designer for the ePortfolio project at the University, I was uniquely positioned as a researching professional to undertake an inquiry into whether students were engaging with the ePortfolio. The participants in this study were a cohort (defined by enrolment in a unit of study) of second and third year education students (n=105) enrolled in a four year Bachelor of Education degree. The students were introduced to the ePortfolio in an introductory lecture and a hands-on workshop in a computer laboratory. They were subsequently required to complete a compulsory assessment task – a critical reflection - using the ePortfolio. Following that, engagement with the ePortfolio was voluntary. A single case study approach arising from an interpretivist paradigm directed the methodological approach and research design for this study. The study investigated the participants’ own accounts of their experiences with the ePortfolio, including how and when they engaged with the ePortfolio and the factors that impacted on their engagement. Data collection methods consisted of an attitude survey, student interviews, document collection, a researcher reflective journal and researcher observations. The findings of the study show that, while the students were encouraged to use the ePortfolio as a learning and employability tool, most students ultimately chose to disengage after completing the assessment task. Only six of the forty-five students (13%) who completed the research survey had used the ePortfolio in a sustained manner. The data obtained from the students during this research has provided insight into reasons why they disengaged from the ePortfolio. The findings add to the understandings and descriptions of student engagement with technology, and more broadly, advance the understanding of ePortfolios. These findings also contribute to the interdisciplinary field of technology implementation. There are three key outcomes from this study, a model of student engagement with technology, a set of criteria for the design of an ePortfolio, and a set of recommendations for effective practice for those implementing ePortfolios. The first, the Model of Student Engagement with Technology (MSET) (Version 2) explored student engagement with technology by highlighting key engagement decision points for students The model was initially conceptualised by building on work of previous research (Version 1), however, following data analysis a new model emerged, MSET (Version 2). The engagement decision points were identified as: • Prior Knowledge and Experience, leading to imagined usefulness and imagined ease of use; • Initial Supported Engagement, leading to supported experience of usefulness and supported ease of use; • Initial Independent Engagement, leading to actual experience of independent usefulness and actual ease of use; and • Ongoing Independent Engagement, leading to ongoing experience of usefulness and ongoing ease of use. The Model of Student Engagement with Technology (MSET) goes beyond numerical figures of usage to demonstrate student engagement with an ePortfolio. The explanatory power of the model is based on the identification of the types of decisions that students make and when they make them during the engagement process. This model presents a greater depth of understanding student engagement than was previously available and has implications for the direction and timing of future implementation, and academic and student development activities. The second key outcome from this study is a set of criteria for the re-conceptualisation of the University ePortfolio. The knowledge gained from this research has resulted in a new set of design criteria that focus on the student actions of writing reflections and adding artefacts. The process of using the ePortfolio is reconceptualised in terms of privileging student learning over administrative compliance. The focus of the ePortfolio is that the writing of critical reflections is the key function, not the selection of capabilities. The third key outcome from this research consists of five recommendations for university practice that have arisen from this study. They are that, sustainable implementation is more often achieved through small steps building on one another; that a clear definition of the purpose of an ePortfolio is crucial for students and staff; that ePortfolio pedagogy should be the driving force not the technology; that the merit of the ePortfolio is fostered in students and staff; and finally, that supporting delayed task performance is crucial. Students do not adopt an ePortfolio just because it is provided. While students must accept responsibility for their own engagement with the ePortfolio, the institution has to accept responsibility for providing the environment, and technical and pedagogical support to foster engagement. Ultimately, an ePortfolio should be considered as a joint venture between student and institution where strong returns on investment can be realised by both. It is acknowledged that the current implementation strategies for the ePortfolio are just the beginning of a much longer process. The real rewards for students, academics and the university lie in the future.

Single crystal Raman spectroscopy of brandholzite Mg[Sb(OH)6]2•6H2O and bottinoite Ni[Sb(OH)6]2•6H2O and the polycrystalline Raman spectrum of mopungite Na[Sb(OH)6]

The single crystal Raman spectra of minerals brandholzite and bottinoite, formula M[Sb(OH)6]2•6H2O, where M is Mg+2 and Ni+2 respectively, and the non-aligned Raman spectrum of mopungite, formula Na[Sb(OH)6], are presented for the first time. The mixed metal minerals comprise of alternating layers of [Sb(OH)6]-1 octahedra and mixed [M(H2O)6]+2 / [Sb(OH)6]-1 octahedra. Mopungite comprises hydrogen bonded layers of [Sb(OH)6]-1 octahedra linked within the layer by Na+ ions. The spectra of the three minerals were dominated by the Sb-O symmetric stretch of the [Sb(OH)6]-1 octahedron, which occurs at approximately 620 cm-1. The Raman spectrum of mopungite showed many similarities to spectra of the di-octahedral minerals informing the view that the Sb octahedra gave rise to most of the Raman bands observed, particularly below 1200 cm-1. Assignments have been proposed based on the spectral comparison between the minerals, prior literature and density field theory calculations of the vibrational spectra of the free [Sb(OH)6]-1 and [M(H2O)6]+2 octahedra by a model chemistry of B3LYP/6-31G(d) and lanl2dz for the Sb atom. The single crystal data spectra showed good mode separation, allowing the majority of the bands to be assigned a symmetry species of A or E.

Teaching motor racing engineering through real-life projects: benefits and challenges

Project-based learning (PBL) is widely used in engineering courses. The closer to real-life the project, the greater the relevance and depth of learning experienced by students. Formula Society of Automotive Engineering (FSAE) is a fine example of a team-based project modelled on real-life problems whereby each student team designs and builds a small race car for competitive evaluation. Queensland University of Technology (QUT) has participated in FSAE-Australia since 2004. Based on the success of the project, QUT has gone the additional step of introducing a motor-racing specialization (second major) to complement its mechanical engineering degree. In this paper, the benefits of teaching motor-racing engineering through real-life projects are presented together with a discussion of the challenges faced and how they have been addressed. In order to validate the authors' observations on the teaching approaches used, student feedback was solicited through QUT's online learning experience survey (LEX), as well as a customized paper-based survey. The results of the surveys are analysed and discussed in this paper.

Industrial JIG measurements : survey measurements assisting QUT motorsport

This paper outlines our literature review background, investigation and practical application utilizing a precise optical survey level and total station technology for a specialist industrial measurement application. The practical part of the project was to measure and check specific critical features of the Industrial JIG assembly table used by the Queensland University of Technology (QUT) Motorsport group. The JIG is used in constructing a new Formula SAE race-car frame each year and is used throughout the racing season to check the production frame for twists, bends and potential stresses. The industrial JIG table required two survey approaches, firstly determination of the overall flatness throughout its’ steel base surface. Secondly was the validation of verticality of the steel uprights used to support and hold the race-car frame in place during construction and checking alignment for key suspension components. In addition the investigation brings realisations that there are far more accurate, efficient and economical technologies to be harnessed in industrial metrology.

The 3D kinematics of the single leg flat and decline squat

Background: Pre-participation screening is commonly used to measure and assess potential intrinsic injury risk. The single leg squat is one such clinical screening measure used to assess lumbopelvic stability and associated intrinsic injury risk. With the addition of a decline board, the single leg decline squat (SLDS) has been shown to reduce ankle dorsiflexion restrictions and allowed greater sagittal plane movement of the hip and knee. On this basis, the SLDS has been employed in the Cricket Australia physiotherapy screening protocols as a measure of lumbopelvic control in the place of the more traditional single leg flat squat (SLFS). Previous research has failed to demonstrate which squatting technique allows for a more comprehensive assessment of lumbopelvic stability. Tenuous links are drawn between kinematics and hip strength measures within the literature for the SLS. Formal evaluation of subjective screening methods has also been suggested within the literature. Purpose: This study had several focal points namely 1) to compare the kinematic differences between the two single leg squatting conditions, primarily the five key kinematic variables fundamental to subjectively assess lumbopelvic stability; 2) determine the effect of ankle dorsiflexion range of motion has on squat kinematics in the two squat techniques; 3) examine the association between key kinematics and subjective physiotherapists’ assessment; and finally 4) explore the association between key kinematics and hip strength. Methods: Nineteen (n=19) subjects performed five SLDS and five SLFS on each leg while being filmed by an 8 camera motion analysis system. Four hip strength measures (internal/external rotation and abd/adduction) and ankle dorsiflexion range of motion were measured using a hand held dynamometer and a goniometer respectively on 16 of these subjects. The same 16 participants were subjectively assessed by an experienced physiotherapist for lumbopelvic stability. Paired samples t-tests were performed on the five predetermined kinematic variables to assess the differences between squat conditions. A Bonferroni correction for multiple comparisons was used which adjusted the significance value to p = 0.005 for the paired t-tests. Linear regressions were used to assess the relationship between kinematics, ankle range of motion and hip strength measures. Bivariate correlations between hip strength measures and kinematics and pelvic obliquity were employed to investigate any possible relationships. Results: 1) Significant kinematic differences between squats were observed in dominant (D) and non-dominant (ND) end of range hip external rotation (ND p = <0.001; D p = 0.004) and hip adduction kinematics (ND p = <0.001; D p = <0.001). With the mean angle, only the non-dominant leg observed significant differences in hip adduction (p = 0.001) and hip external rotation (p = <0.001); 2) Significant linear relationships were observed between clinical measures of ankle dorsiflexion and sagittal plane kinematic namely SLFS dominant ankle (p = 0.006; R2 = .429), SLFS non-dominant knee (p = 0.015; R2 = .352) and SLFS non-dominant ankle (p = 0.027; R2 = .305) kinematics. Only the dominant ankle (p = 0.020; R2 = .331) was found to have a relationship with the decline squat. 3) Strength measures had tenuous associations with the subjective assessments of lumbopelvic stability with no significant relationships being observed. 4) For the non-dominant leg, external rotation strength and abduction strength were found to be significantly correlated with hip rotation kinematics (Newtons r = 0.458 p = 0.049; Normalised for bodyweight: r = 0.469; p = 0.043) and pelvic obliquity (normalised for bodyweight: r = 0.498 p = 0.030) respectively for the SLFS only. No significant relationships were observed in the dominant leg for either squat condition. Some elements of the hip strength screening protocols had linear relationships with kinematics of the lower limb, particularly the sagittal plane movements of the knee and ankle. Strength measures had tenuous associations with the subjective assessments of lumbopelvic stability with no significant relationships being observed; Discussion: The key finding of this study illustrated that kinematic differences can occur at the hip without significant kinematic differences at the knee as a result of the introduction of a decline board. Further observations reinforce the role of limited ankle dorsiflexion range of motion on sagittal plane movement of the hip and knee and in turn multiplanar kinematics of the lower limb. The kinematic differences between conditions have clinical implications for screening protocols that employ frontal plane movement of the knee as a guide for femoral adduction and rotation. Subjects who returned stronger hip strength measurements also appeared to squat deeper as characterised by differences in sagittal plane kinematics of the knee and ankle. Despite the aforementioned findings, the relationship between hip strength and lower limb kinematics remains largely tenuous in the assessment of the lumbopelvic stability using the SLS. The association between kinematics and the subjective measures of lumbopelvic stability also remain tenuous between and within SLS screening protocols. More functional measures of hip strength are needed to further investigate these relationships. Conclusion: The type of SLS (flat or decline) should be taken into account when screening for lumbopelvic stability. Changes to lower limb kinematics, especially around the hip and pelvis, were observed with the introduction of a decline board despite no difference in frontal plane knee movements. Differences in passive ankle dorsiflexion range of motion yielded variations in knee and ankle kinematics during a self-selected single leg squatting task. Clinical implications of removing posterior ankle restraints and using the knee as a guide to illustrate changes at the hip may result in inaccurate screening of lumbopelvic stability. The relationship between sagittal plane lower limb kinematics and hip strength may illustrate that self-selected squat depth may presumably be a useful predictor of the lumbopelvic stability. Further research in this area is required.

Navigating the muddy waters of the research into single sex classrooms in co-educational middle years settings

Establishing single sex classes within co-educational sites is an option that Australian schools are again exploring. To date Australia has experienced three ‘waves’ of interest in establishing single sex classes, the first focused on equitable education opportunities for girls (Alloway & Gilbert, 1997), the second centered on boys’ literacy and engagement (Gilbert & Gilbert, 1998) and this current wave focuses on perceived difference between the sexes in co-educational classrooms (Protheroe, 2009; Gurian, Stevens & Daniels, 2009). With the intersection of middle schooling movement, focusing on learner centered classrooms (Pendergast & Bahr, 2010) and current educational agendas aimed at improving student performance and measurable learning outcomes (Ministerial Council on Education, Employment, Training and Youth Affairs, 2008), it is understandable that schools are exploring such student grouping options. However, after thirty years of international research into the efficacy of single sex classes in co-educational settings, the results still remain unclear. This paper seeks to navigate the ‘muddy waters’ of this body of research and suggests a framework to help guide school communities through the decision-making process associated with considering single sex classes.

Ensuring student success : establishing a community of practice for culturally and linguistically diverse preservice teachers

This paper discusses the primacy of communities of practice within learning contexts at university and during practicum for culturally and linguistically diverse preservice teachers. The study illustrates that learning occurs when there are adequate opportunities for participation and practice. Data from interviews with 28 culturally and linguistically diverse preservice teachers illustrate that tensions created by social, cultural differences impact upon modes of identification and dimensions of practice (Lave & Wenger, 1991; Wenger, 1998). The study concludes by reiterating the importance of establishing proactive communities of practice to ensure success in learning and practice for this group of preservice teachers.

Analysing student programs in the PHP intelligent tutoring system

Programming is a subject that many beginning students find difficult. The PHP Intelligent Tutoring System (PHP ITS) has been designed with the aim of making it easier for novices to learn the PHP language in order to develop dynamic web pages. Programming requires practice. This makes it necessary to include practical exercises in any ITS that supports students learning to program. The PHP ITS works by providing exercises for students to solve and then providing feedback based on their solutions. The major challenge here is to be able to identify many semantically equivalent solutions to a single exercise. The PHP ITS achieves this by using theories of Artificial Intelligence (AI) including first-order predicate logic and classical and hierarchical planning to model the subject matter taught by the system. This paper highlights the approach taken by the PHP ITS to analyse students’ programs that include a number of program constructs that are used by beginners of web development. The PHP ITS was built using this model and evaluated in a unit at the Queensland University of Technology. The results showed that it was capable of correctly analysing over 96 % of the solutions to exercises supplied by students.