Starter packs : a good start to therapy?

Samples of drugs are often given to doctors by pharmaceutical representatives as part of a marketing strategy. Despite the well described advantages of drug samples, little has been published on the potential adverse outcomes. A series of consumer calls to the Adverse Medicine Events Line has highlighted concerns regarding the quality use of medicines associated with drug samples. The most commonly reported problems were drug samples being supplied to patients with inadequate information regarding dosage, administration, storage and possible adverse effects. In addition, some patients were given excessive quantities of a drug. To reduce such adverse outcomes, the drug industry, health professionals and consumers should be aware of the potential problems associated with starter packs.

Is your sample cupboard relevant to your practice?

Sample medications represented 4 (3.8 million Australian dollars) of the Australian general practice promotional budget of pharmaceutical companies in the second quarter of 2005. In the United States, general practitioners have been shown to use sample medication in up to 20 of encounters both for commencing and for full treatment. Given the USA does not have a universal subsidy for medications like Australia, sample use may be higher than Australian GPs operating with the Pharmaceutical Benefits Scheme. Australian GPs perceive benefits for samples as a trial run: to test patient tolerability, enhance patient satisfaction, and for those who cannot afford multiple trials of drugs. Acceptance of samples by GPs is associated with preference for and rapid prescription of new drugs and positive attitudes toward pharmaceutical representatives. Concerns with sample medications include prescribing medication that is not the GP's preferred choice owing to the limited range of samples available. Other concerns include dispensing expired medication and wastage of medications.

The role of education and awareness in workplace alcohol and drug use in the Australian construction industry : proposed program of research and preliminary results

The main aim of this paper is to outline a proposed program of research which will attempt to quantify the extent of the problem of alcohol and other drugs in the Australian construction industry, and furthermore, develop an appropriate industry-wide policy and cultural change management program and implementation plan to address the problem. This paper will also present preliminary results from the study. The study will use qualitative and quantitative methods (in the form of interviews and surveys, respectively) to evaluate the extent of the problem of alcohol and other drug use in this industry, to ascertain the feasibility of an industry-wide policy and cultural change management program, and to develop an appropriate implementation plan. The study will be undertaken in several construction organisations, at selected sites in South Australia, Victoria and Northern Territory. It is anticipated that approximately 500 employees from the participating organisations across Australia will take part in the study. The World Health Organisation’s Alcohol Use Disorders Identification Test (AUDIT) will be used to measure the extent of alcohol use in the industry. Illicit drug use, ‘‘readiness to change’’, impediments to reducing impairment, feasibility of proposed interventions, and employee attitudes and knowledge regarding workplace AOD impairment, will also be measured through a combination of interviews and surveys. Among the preliminary findings, for 51% (n=127) of respondents, score on the AUDIT indicated alcohol use at hazardous levels. Of the respondents who were using alcohol at hazardous levels, 76% reported (n97) that they do not have a problem with drinking and 54% (n=68) reported that it would be easy to ‘‘cut down’’ or stop drinking. Nearly half (49%) of all respondents (n=122) had used marijuana/cannabis at some time prior to being surveyed. The use of other illicit substances was much less frequently reported. Preliminary interview findings indicated a lack of adequate employee knowledge regarding the physical effects of alcohol and other drugs in the workplace. As for conclusions, the proposed study will address a major gap in the literature with regard to the extent of the problem of alcohol and other drug use in the construction industry in Australia. The study will also develop and implement a national, evidence-based workplace policy, with the aim of mitigating the deleterious effects of alcohol and other drugs in this industry.

Safety impacts of alcohol and other drugs in the construction industry : a research methodology

Anecdotal evidence from the infrastructure and building sectors highlights issues of drugs and alcohol and its association with safety risk on construction sites. Operating machinery and mobile equipment, proximity to live traffic together with congested sites, electrical equipment and operating at heights conspire to accentuate the potential adverse impact of drugs and alcohol in the workplace. While most Australian jurisdictions have identified this as a critical safety issue, information is limited regarding the prevalence of alcohol and other drugs in the workplace and there is limited evidential guidance regarding how to effectively and efficiently address such an issue. No known study has scientifically evaluated the relationship between the use of drugs and alcohol and safety impacts in construction, and there has been only limited adoption of nationally coordinated strategies, supported by employers and employees to render it socially unacceptable to arrive at a construction workplace with impaired judgement from drugs and alcohol. A nationally consistent collaborative approach across the construction workforce - involving employers and employees; clients; unions; contractors and sub-contractors is required to engender a cultural change in the construction workforce – in a similar manner to the on-going initiative in securing a cultural change to drink-driving in our society where peer intervention and support is encouraged. This study has four key objectives. Firstly, using the standard World Health Organisation AUDIT, a national qualitative and quantitative assessment of the use of drugs and alcohol will be carried out. This will build upon similar studies carried out in the Australian energy and mining sectors. Secondly, the development of an appropriate industry policy will adopt a non-punitive and rehabilitative approach developed in consultation with employers and employees across the infrastructure and building sectors, with the aim it be adopted nationally for adoption at the construction workplace. Thirdly, an industry-specific cultural change management program will be developed through a nationally collaborative approach to reducing the risk of impaired performance on construction sites and increasing workers’ commitment to drugs and alcohol safety. Finally, an implementation plan will be developed from data gathered from both managers and construction employees. Such an approach stands to benefit not only occupational health and safety, through a greater understanding of the safety impacts of alcohol and other drugs at work, but also alcohol and drug use as a wider community health issue. This paper will provide an overview of the background and significance of the study as well as outlining the proposed methodology that will be used to evaluate the safety impacts of alcohol and other drugs in the construction industry.

Empirical basis for adopting a theory-driven approach to preventing alcohol and other drug impairment (AOD) in the workplace

Background: A State-based industry in Australia is in the process of developing a programme to prevent AOD impairment in the workplace. The objective of this study was to determine whether the Theory of Planned Behaviour can help explain the mechanisms by which behaviour change occurs with regard to AOD impairment in the workplace. ---------- Method: A survey of 1165 employees of a State-based industry in Australia was conducted, and a response rate of 98% was achieved. The survey included questions relevant to the Theory of Planned Behaviour: behaviour; behavioural intentions; attitude; perceptions of social pressure; and perceived behavioural control with regard to workplace AOD impairment. ---------- Findings: Less than 3% of participants reported coming to work impaired by AODs. Fewer than 2% of participants reported that they intended to come to work impaired by AODs. The majority of participants (over 80%) reported unfavourable attitudes toward AOD impairment at work. Logistic regression analyses suggest that, consistent with the theory of planned behaviour: attitudes, perceptions of social pressure, and perceived behavioural control with regard to workplace AOD impairment, all predict behavioural intentions (P < .001); and behavioural intentions predict (self-reported) behaviour regarding workplace AOD impairment (P < .001). ---------- Conclusions: The Theory of Planned Behaviour appears to assist with understanding the mechanisms by which behaviour change occurs with regard to AOD impairment in the workplace. An occupational AOD programme which targets those mechanisms for change may improve its impact in preventing workplace AOD impairment.

Safety impacts of alcohol and other drugs in construction : development of an industry policy and cultural change management program

There is increasing concern about the impact of employees‟ alcohol and other drug (AOD) consumption on workplace safety and performance, particularly within the construction industry. While most Australian jurisdictions have identified this as a critical safety issue, information is limited regarding the prevalence of AODs in the workplace and there is limited evidential guidance regarding how to effectively and efficiently address such an issue. The current research aims to scientifically evaluate the use of AODs within the Australian construction industry in order to reduce the potential resulting safety and performance impacts and engender a cultural change in the workforce - to render it unacceptable to arrive at a construction workplace with impaired judgement from AODs. The study will adopt qualitative and quantitative methods to firstly evaluate the extent of general AOD use in the industry. Secondly, the development of an appropriate industry policy will adopt a non-punitive and rehabilitative approach developed in consultation with employers and employees across the infrastructure and building sectors, with the aim it be adopted nationally for adoption at the construction workplace. Finally, an industry specific cultural change management program and implementation plan will be developed through a nationally collaborative approach. Final results indicate that a proportion of those sampled in the construction sector may be at risk of hazardous alcohol consumption. A total of 286 respondents (58%) scored above the cut-off cumulative score for risky or hazardous alcohol. Other drug use was also identified as a major issue. Results support the need for evidence-based, preventative educational initiatives that are tailored to the industry. This paper will discuss the final survey and interview results.

Alcohol and other drugs in the Australian construction industry : a pathway for safety focused cultural change

Background: Anecdotal evidence from the infrastructure and building sectors highlights issues of alcohol and other drugs (AODs) and its association with safety risk on construction sites. Currently, there is no clear evidence on the prevalence and risk of AOD use among Australian construction workers and there is limited evidential guidance regarding how to effectively address such an issue. Aims: The current research aims to scientifically evaluate the use of AODs within the Australian construction industry in order to reduce the potential resulting safety and performance impacts and engender a cultural change in the workforce. A nationally consistent and collaborative approach across the workforce will be adopted. Methods: A national assessment of the use of AODs was conducted in participating organisations across three states. The World Health Organisation’s Alcohol Use Disorders Identification Test (AUDIT) was used to measure alcohol use. Illicit drug use, ‘readiness to change’, impediments to reducing impairment, feasibility of proposed interventions, and employee attitudes and knowledge regarding AOD was also measured through a combination of survey items and interviews. Through an educative approach and consultation with employers, employees, union groups and leaders in applied AOD research, this assessment was used to inform and support cultural change management of AOD use in the industry. Results: Results (n=494) indicate that as in the general population, a proportion of those sampled in the construction sector may be at risk of hazardous alcohol consumption. A total of 286 respondents (58%) scored above the cut-off cumulative score for risky or hazardous alcohol use. Other drug use was also identified as a major issue. Interview responses and input from all project partners is presented within a guiding principle framework for cultural change. Conclusions: Results support the need for evidence-based, comprehensive and tailored responses in the workplace. This paper will discuss the final results in the context of facilitating cultural change in the construction industry.

Mathematical modelling of controlled drug release from polymer micro-spheres : incorporating the effects of swelling, diffusion and dissolution via moving boundary problems

Controlled drug delivery is a key topic in modern pharmacotherapy, where controlled drug delivery devices are required to prolong the period of release, maintain a constant release rate, or release the drug with a predetermined release profile. In the pharmaceutical industry, the development process of a controlled drug delivery device may be facilitated enormously by the mathematical modelling of drug release mechanisms, directly decreasing the number of necessary experiments. Such mathematical modelling is difficult because several mechanisms are involved during the drug release process. The main drug release mechanisms of a controlled release device are based on the device’s physiochemical properties, and include diffusion, swelling and erosion. In this thesis, four controlled drug delivery models are investigated. These four models selectively involve the solvent penetration into the polymeric device, the swelling of the polymer, the polymer erosion and the drug diffusion out of the device but all share two common key features. The first is that the solvent penetration into the polymer causes the transition of the polymer from a glassy state into a rubbery state. The interface between the two states of the polymer is modelled as a moving boundary and the speed of this interface is governed by a kinetic law. The second feature is that drug diffusion only happens in the rubbery region of the polymer, with a nonlinear diffusion coefficient which is dependent on the concentration of solvent. These models are analysed by using both formal asymptotics and numerical computation, where front-fixing methods and the method of lines with finite difference approximations are used to solve these models numerically. This numerical scheme is conservative, accurate and easily implemented to the moving boundary problems and is thoroughly explained in Section 3.2. From the small time asymptotic analysis in Sections 5.3.1, 6.3.1 and 7.2.1, these models exhibit the non-Fickian behaviour referred to as Case II diffusion, and an initial constant rate of drug release which is appealing to the pharmaceutical industry because this indicates zeroorder release. The numerical results of the models qualitatively confirms the experimental behaviour identified in the literature. The knowledge obtained from investigating these models can help to develop more complex multi-layered drug delivery devices in order to achieve sophisticated drug release profiles. A multi-layer matrix tablet, which consists of a number of polymer layers designed to provide sustainable and constant drug release or bimodal drug release, is also discussed in this research. The moving boundary problem describing the solvent penetration into the polymer also arises in melting and freezing problems which have been modelled as the classical onephase Stefan problem. The classical one-phase Stefan problem has unrealistic singularities existed in the problem at the complete melting time. Hence we investigate the effect of including the kinetic undercooling to the melting problem and this problem is called the one-phase Stefan problem with kinetic undercooling. Interestingly we discover the unrealistic singularities existed in the classical one-phase Stefan problem at the complete melting time are regularised and also find out the small time behaviour of the one-phase Stefan problem with kinetic undercooling is different to the classical one-phase Stefan problem from the small time asymptotic analysis in Section 3.3. In the case of melting very small particles, it is known that surface tension effects are important. The effect of including the surface tension to the melting problem for nanoparticles (no kinetic undercooling) has been investigated in the past, however the one-phase Stefan problem with surface tension exhibits finite-time blow-up. Therefore we investigate the effect of including both the surface tension and kinetic undercooling to the melting problem for nanoparticles and find out the the solution continues to exist until complete melting. The investigation of including kinetic undercooling and surface tension to the melting problems reveals more insight into the regularisations of unphysical singularities in the classical one-phase Stefan problem. This investigation gives a better understanding of melting a particle, and contributes to the current body of knowledge related to melting and freezing due to heat conduction.

Perception of prescription medicine sample packs among Australian professional, government, industry, and consumer organizations, based on automated textual analysis of one-on-one interviews

Background Prescription medicine samples provided by pharmaceutical companies are predominantly newer and more expensive products. The range of samples provided to practices may not represent the drugs that the doctors desire to have available. Few studies have used a qualitative design to explore the reasons behind sample use. Objective The aim of this study was to explore the opinions of a variety of Australian key informants about prescription medicine samples, using a qualitative methodology. Methods Twenty-three organizations involved in quality use of medicines in Australia were identified, based on the authors' previous knowledge. Each organization was invited to nominate 1 or 2 representatives to participate in semistructured interviews utilizing seeding questions. Each interview was recorded and transcribed verbatim. Leximancer v2.25 text analysis software (Leximancer Pty Ltd., Jindalee, Queensland, Australia) was used for textual analysis. The top 10 concepts from each analysis group were interrogated back to the original transcript text to determine the main emergent opinions. Results A total of 18 key interviewees representing 16 organizations participated. Samples, patient, doctor, and medicines were the major concepts among general opinions about samples. The concept drug became more frequent and the concept companies appeared when marketing issues were discussed. The Australian Pharmaceutical Benefits Scheme and cost were more prevalent in discussions about alternative sample distribution models, indicating interviewees were cognizant of budgetary implications. Key interviewee opinions added richness to the single-word concepts extracted by Leximancer. Conclusions Participants recognized that prescription medicine samples have an influence on quality use of medicines and play a role in the marketing of medicines. They also believed that alternative distribution systems for samples could provide benefits. The cost of a noncommercial system for distributing samples or starter packs was a concern. These data will be used to design further research investigating alternative models for distribution of samples.

Using DNA as a drug : challenges and opportunities for process engineers

The maturing of the biotechnology industry and a focus on productivity has seen a shift from discovery science to small-scale bench-top research to higher productivity, large scale production. Health companies are aggressively expanding their biopharmaceutical interests, an expansion which is facilitated by biochemical and bioprocess engineering. An area of continuous growth is vaccines. Vaccination will be a key intervention in the case of an influenza pandemic. The global manufacturing capacity for fast turn around vaccines is currently woefully inadequate at around 300 million shots. As the prevention of epidemics requires > 80 % vaccination, in theory the world should currently be aiming for the ability to produce around 5.3 billion vaccines. Presented is a production method for the creation of a fast turn around DNA vaccine. A DNA vaccine could have a production time scale of as little as two weeks. This process has been harnessed into a pilot scale production system for the creation of a pre-clinical grade malaria vaccine in a collaborative project with the Coppel Lab, Department of Microbiology, Monash University. In particular, improvements to the fermentation, chromatography and delivery stages will be discussed. Consideration will then be given as to how the fermentation stage affects the mid and downstream processing stages.

Evaluation of a workplace alcohol and other drug policy

BACKGROUND The current impetus for developing alcohol and/or other drugs (AODs) workplace policies in Australia is to reduce workplace AOD impairment, improve safety, and prevent AOD-related injury in the workplace. For these policies to be effective, they need to be informed by scientific evidence. Evidence to inform the development and implementation of effective workplace AOD policies is currently lacking. There does not currently appear to be conclusive evidence for the effectiveness of workplace AOD policies in reducing impairment and preventing AOD-related injury. There is also no apparent evidence regarding which factors facilitate or impede the success of an AOD policy, or whether, for example, unsuccessful policy outcomes were due to poor policy or merely poor implementation of the policy. It was the aim of this research to undertake a process, impact, and outcome evaluation of a workplace AOD policy, and to contribute to the body of knowledge on the development and implementation of effective workplace AOD policies. METHODS The research setting was a state-based power-generating industry in Australia between May 2008 and May 2010. Participants for the process evaluation study were individuals who were integral to either the development or the implementation of the workplace AOD policy, or both of these processes (key informants), and comprised the majority of individuals who were involved in the process of developing and/or implementing the workplace AOD policy. The sample represented the two main groups of interest—management and union delegates/employee representatives—from all three of the participating organisations. For the impact and outcome evaluation studies, the population included all employees from the three participating organisations, and participants were all employees who consented to participate in the study and who completed both the pre-and post-policy implementation questionnaires. Qualitative methods in the form of interviews with key stakeholders were used to evaluate the process of developing and implementing the workplace AOD policy. In order to evaluate the impact of the policy with regard to the risk factors for workplace AOD impairment, and the outcome of the policy in terms of reducing workplace AOD impairment, quantitative methods in the form of a non-randomised single group pre- and post-test design were used. Changes from Time 1 (pre) to Time 2 (post) in the risk factors for workplace AOD impairment, and changes in the behaviour of interest—(self-reported) workplace AOD impairment—were measured. An integration of the findings from the process, impact, and outcome evaluation studies was undertaken using a combination of qualitative and quantitative methods. RESULTS For the process evaluation study Study respondents indicated that their policy was developed in the context of comparable industries across Australia developing workplace AOD policies, and that this was mainly out of concern for the deleterious health and safety impacts of workplace AOD impairment. Results from the process evaluation study also indicated that in developing and implementing the workplace AOD policy, there were mainly ‗winners', in terms of health and safety in the workplace. While there were some components of the development and implementation of the policy that were better done than others, and the process was expensive and took a long time, there were, overall, few unanticipated consequences to implementing the policy and it was reported to be thorough and of a high standard. Findings also indicated that overall the policy was developed and implemented according to best-practice in that: consultation during the policy development phase (with all the main stakeholders) was extensive; the policy was comprehensive; there was universal application of the policy to all employees; changes in the workplace (with regard to the policy) were gradual; and, the policy was publicised appropriately. Furthermore, study participants' responses indicated that the role of an independent external expert, who was trusted by all stakeholders, was integral to the success of the policy. For the impact and outcome evaluation studies Notwithstanding the limitations of pre- and post-test study designs with regard to attributing cause to the intervention, the findings from the impact evaluation study indicated that following policy implementation, statistically significant positive changes with regard to workplace AOD impairment were recorded for the following variables (risk factors for workplace AOD impairment): Knowledge; Attitudes; Perceived Behavioural Control; Perceptions of the Certainty of being punished for coming to work impaired by AODs; Perceptions of the Swiftness of punishment for coming to work impaired by AODs; and Direct and Indirect Experience with Punishment Avoidance for workplace AOD impairment. There were, however, no statistically significant positive changes following policy implementation for Behavioural Intentions, Subjective Norms, and Perceptions of the Severity of punishment for workplace AOD impairment. With regard to the outcome evaluation, there was a statistically significant reduction in self-reported workplace AOD impairment following the implementation of the policy. As with the impact evaluation, these findings need to be interpreted in light of the limitations of the study design in being able to attribute cause to the intervention alone. The findings from the outcome evaluation study also showed that while a positive change in self-reported workplace AOD impairment following implementation of the policy did not appear to be related to gender, age group, or employment type, it did appear to be related to levels of employee general alcohol use, cannabis use, site type, and employment role. Integration of the process, impact, and outcome evaluation studies There appeared to be qualitative support for the relationship between the process of developing and implementing the policy, and the impact of the policy in changing the risk factors for workplace AOD impairment. That is, overall the workplace AOD policy was developed and implemented well and, following its implementation, there were positive changes in the majority of measured risk factors for workplace AOD impairment. Quantitative findings lend further support for a relationship between the process and impact of the policy, in that there was a statistically significant association between employee perceived fidelity of the policy (related to the process of the policy) and positive changes in some risk factors for workplace AOD impairment (representing the impact of the policy). Findings also indicated support for the relationship between the impact of the policy in changing the risk factors for workplace AOD impairment and the outcome of the policy in reducing workplace AOD impairment: positive changes in the risk factors for workplace AOD impairment (impact) were related to positive changes in self reported workplace AOD impairment (representing the main goal and outcome of the policy). CONCLUSIONS The findings from the research indicate support for the conclusion that the policy was appropriately implemented and that it achieved its objectives and main goal. The Doctoral research findings also addressed a number of gaps in the literature on workplace AOD impairment, namely: the likely effectiveness of AOD policies for reducing AOD impairment in the workplace, which factors in the development and implementation of a workplace AOD policy are likely to facilitate or impede the effectiveness of the policy to reduce workplace AOD impairment, and which employee groups are less likely to respond well to policies of this type. The findings from this research not only represent an example of translational, applied research—through the evaluation of the study industry's policy—but also add to the body of knowledge on workplace AOD policies and provide policy-makers with evidence which may be useful in the development and implementation of effective workplace AOD policies. Importantly, the findings espouse the importance of scientific evidence in the development, implementation, and evaluation of workplace AOD policies.