The origin of a large (>3km) maar volcano by coalescence of multiple shallow craters: Lake Purrumbete maar, southeastern Australia

Lake Purrumbete maar is located in the intraplate, monogenetic Newer Volcanics Province in southeastern Australia. The extremely large crater of 3000. m in diameter formed on an intersection of two fault lines and comprises at least three coalesced vents. The evolution of these vents is controlled by the interaction of the tectonic setting and the properties of both hard and soft rock aquifers. Lithics in the maar deposits originate from country rock formations less than 300. m deep, indicating that the large size of the crater cannot only be the result of the downwards migration of the explosion foci in a single vent. Vertical crater walls and primary inward dipping beds evidence that the original size of the crater has been largely preserved. Detailed mapping of the facies distributions, the direction of transport of base surges and pyroclastic flows, and the distribution of ballistic block fields, form the basis for the reconstruction of the complex eruption history,which is characterised by alternations of the eruption style between relatively dry and wet phreatomagmatic conditions, and migration of the vent location along tectonic structures. Three temporally separated eruption phases are recognised, each starting at the same crater located directly at the intersection of two local fault lines. Activity then moved quickly to different locations. A significant volcanic hiatus between two of the three phases shows that the magmatic system was reactivated. The enlargement of especially the main crater by both lateral and vertical growth led to the interception of the individual craters and the formation of the large circular crater. Lake Purrumbete maar is an excellent example of how complicated the evolution of large, seemingly simple, circular maar volcanoes can be, and raises the question if these systems are actually monogenetic.

Micro-structure differences in kaolinite suspensions

SEM observations of the aqueous suspensions of kaolinite from Birdwood (South Australia) and Georgia (USA) show noticeable differences in number of physical behaviour which has been explained by different microstructure constitution.. Birdwood kaolinite dispersion gels are observed at very low solid loadings in comparison with Georgia KGa-1 kaolinite dispersions which remain fluid at higher solids loading. To explain this behaviour, the specific particle interactions of Birdwood kaolinite, different from interaction in Georgia kaolinite have been proposed. These interactions may be brought about by the presence of nano-bubbles on clay crystal edges and may force clay particles to aggregate by bubble coalescence. This explains the predominance of stair step edge-edge like (EE) contacts in suspension of Birdwood kaolinite. Such EE linked particles build long strings that form a spacious cell structure. Hydrocarbon contamination of colloidal kaolinite particles and low aspect ratio are discussed as possible explanations of this unusual behaviour of Birdwood kaolinite. In Georgia KGa-1 kaolinite dispersions instead of EE contact between platelets displayed in Birdwood kaolinite, most particles have edge to face (EF) contacts building a cardhouse structure. Such an arrangement is much less voluminous in comparison with the Birdwood kaolinite cellular honeycomb structure observed previously in smectite aqueous suspensions. Such structural characteristics of KGa-1 kaolinite particles enable higher solid volume fractions pulps to form before significantly networked gel consistency is attained.

Subjectivizations : Deleuze and Architecture

My thesis is an exploration of the architectural production surrounding the French philosopher Gilles Deleuze, specifically, through the overarching theme of Deleuze’s theory of subjectivity, which I will call subjectivization. I interpret this to mean the strange coalescence of matter, architectural subject, and event, in architectural experience and culture. I speculate that subjectivization presents a yet under-explored dimension of deleuzianism in architecture. In order to develop this I pursue two independent trajectories: firstly the narrative of architectural production surrounding Deleuze, from the 1970s until today, as it is an emergence of changing groupings, alliances, formations and disbandment in the pursuit of creative-intellectual tasks—what might be called the subjectivization of architecture—and, secondly, through a speculation about the architecture of subjectivization—that is, an attempt to explore, concretely, what might be the space and time of subjectivization. Chapter One traces an oral history of deleuzianism in architecture, through conversations with Sanford Kwinter and John Rajchman, describing how the Deleuze milieu makes its way into architectural practice and discussion—subjectivization as a social and cultural emergence—whereas Chapter Two theorizes the emergence of an architectural subjectivity where architecture constitutes its own affective event—what I call subjectivization or material becoming-subject.

Self-organized quantum dot arrays : kinetic mapping of adatom capture

Deterministic synthesis of self-organized quantum dot arrays for renewable energy, biomedical, and optoelectronic applications requires control over adatom capture zones, which are presently mapped using unphysical geometric tessellation. In contrast, the proposed kinetic mapping is based on simulated two-dimensional adatom fluxes in the array and includes the effects of nucleation, dissolution, coalescence, and process parameters such as surface temperature and deposition rate. This approach is generic and can be used to control the nanoarray development in various practical applications. © 2009 American Institute of Physics.

SWCNT networks on nanoporous silica catalyst support : morphological and connectivity control for nanoelectronic, gas-sensing, and biosensing devices

Effective control of morphology and electrical connectivity of networks of single-walled carbon nanotubes (SWCNTs) by using rough, nanoporous silica supports of Fe catalyst nanoparticles in catalytic chemical vapor deposition is demonstrated experimentally. The very high quality of the nanotubes is evidenced by the G-to-D Raman peak ratios (>50) within the range of the highest known ratios. Transitions from separated nanotubes on smooth SiO2 surface to densely interconnected networks on the nanoporous SiO2 are accompanied by an almost two-order of magnitude increase of the nanotube density. These transitions herald the hardly detectable onset of the nanoscale connectivity and are confirmed by the microanalysis and electrical measurements. The achieved effective nanotube interconnection leads to the dramatic, almost three-orders of magnitude decrease of the SWCNT network resistivity compared to networks of similar density produced by wet chemistry-based assembly of preformed nanotubes. The growth model, supported by multiscale, multiphase modeling of SWCNT nucleation reveals multiple constructive roles of the porous catalyst support in facilitating the catalyst saturation and SWCNT nucleation, consistent with the observed higher density of longer nanotubes. The associated mechanisms are related to the unique surface conditions (roughness, wettability, and reduced catalyst coalescence) on the porous SiO2 and the increased carbon supply through the supporting porous structure. This approach is promising for the direct integration of SWCNT networks into Si-based nanodevice platforms and multiple applications ranging from nanoelectronics and energy conversion to bio- and environmental sensing.

Degree of value alignment : a grounded theory of rural nurse resignations

INTRODUCTION: The shortage of nurses willing to work in rural Australian healthcare settings continues to worsen. Australian rural areas have a lower retention rate of nurses than metropolitan counterparts, with more remote communities experiencing an even higher turnover of nursing staff. When retention rates are lower, patient outcomes are known to be poorer. This article reports a study that sought to explore the reasons why registered nurses resign from rural hospitals in the state of New South Wales, Australia. METHODS: Using grounded theory methods, this study explored the reasons why registered nurses resigned from New South Wales rural hospitals. Data were collected from 12 participants using semi-structured interviews; each participant was a registered nurse who had resigned from a rural hospital. Nurses who had resigned due to retirement, relocation or maternity leave were excluded. Interviews were transcribed verbatim and imported into NVivo software. The constant comparative method of data collection and analysis was followed until a core category emerged. RESULTS: Nurses resigned from rural hospitals when their personal value of how nursing should occur conflicted with the hospital's organisational values driving the practice of nursing. These conflicting values led to a change in the degree of value alignment between the nurse and hospital. The degree of value alignment occurred in three dynamic stages that nurses moved through prior to resigning. The first stage, sharing values, was a time when a nurse and a hospital shared similar values. The second stage was conceding values where, due to perceived changes in a hospital's values, a nurse felt that patient care became compromised and this led to a divergence of values. The final stage was resigning, a stage where a nurse 'gave up' as they felt that their professional integrity was severely compromised. The findings revealed that when a nurse and organisational values were not aligned, conflict was created for a nurse about how they could perform nursing that aligned with their internalised professional values and integrity. Resignation occurred when nurses were unable to realign their personal values to changed organisational values - the organisational values changed due to rural area health service restructures, centralisation of budgets and resources, cumbersome hierarchies and management structures that inhibited communication and decision making, out-dated and ineffective operating systems, insufficient and inexperienced staff, bullying, and a lack of connectedness and shared vision. CONCLUSIONS: To fully comprehend rural nurse resignations, this study identified three stages that nurses move through prior to resignation. Effective retention strategies for the nursing workforce should address contributors to a decrease in value alignment and work towards encouraging the coalescence of nurses' and hospitals' values. It is imperative that strategies enable nurses to provide high quality patient care and promote a sense of connectedness and a shared vision between nurse and hospital. Senior managers need to have clear ways to articulate and imbue organisational values and be explicit in how these values accommodate nurses' values. Ward-level nurse managers have a significant responsibility to ensure that a hospital's values (both explicit and implicit) are incorporated into ward culture.

Simulating droplet motion on virtual leaf surfaces

A curvilinear thin film model is used to simulate the motion of droplets on a virtual leaf surface, with a view to better understand the retention of agricultural sprays on plants. The governing model, adapted from Roy et al. (2002 J. Fluid Mech. 454, 235–261) with the addition of a disjoining pressure term, describes the gravity- and curvature driven flow of a small droplet on a complex substrate: a cotton leaf reconstructed from digitized scan data. Coalescence is the key mechanism behind spray coating of foliage, and our simulations demonstrate that various experimentally observed coalescence behaviours can be reproduced qualitatively. By varying the contact angle over the domain, we also demonstrate that the presence of a chemical defect can act as an obstacle to the droplet’s path, causing break-up. In simulations on the virtual leaf, it is found that the movement of a typical spray size droplet is driven almost exclusively by substrate curvature gradients. It is not until droplet mass is sufficiently increased via coalescence that gravity becomes the dominating force.

Pentacene on Ni(111): room-temperature molecular packing and temperature-activated conversion to graphene

We investigate, using scanning tunnelling microscopy, the adsorption of pentacene on Ni(111) at room temperature and the behaviour of these monolayer films with annealing up to 700 °C. We observe the conversion of pentacene into graphene, which begins from as low as 220 °C with the coalescence of pentacene molecules into large planar aggregates. Then, by annealing at 350 °C for 20 minutes, these aggregates expand into irregular domains of graphene tens of nanometers in size. On surfaces where graphene and nickel carbide coexist, pentacene shows preferential adsorption on the nickel carbide phase. The same pentacene to graphene transformation was also achieved on Cu(111), but at a higher activation temperature, producing large graphene domains that exhibit a range of moiré superlattice periodicities.

A curve shortening flow rule for closed embedded plane curves with a prescribed rate of change in enclosed area

Motivated by a problem from fluid mechanics, we consider a generalization of the standard curve shortening flow problem for a closed embedded plane curve such that the area enclosed by the curve is forced to decrease at a prescribed rate. Using formal asymptotic and numerical techniques, we derive possible extinction shapes as the curve contracts to a point, dependent on the rate of decreasing area; we find there is a wider class of extinction shapes than for standard curve shortening, for which initially simple closed curves are always asymptotically circular. We also provide numerical evidence that self-intersection is possible for non-convex initial conditions, distinguishing between pinch-off and coalescence of the curve interior.