Submission to KPMG review of the Federal Government Initiative to “analyse dementia program and services funded by the Department of Social Services"

The comments I make are based on my nearly twenty years involvement in the dementia cause at both a national and international level. In preparation, I read two papers namely the Ministerial Dementia Forum – Option Paper produced by KPMG Management Consultants (2014) and Analysis of Dementia Programmes and Services Funded by the Department of Social Services: Conversation Starter prepared by KPMG as a preparation document for those attending a workshop in Brisbane on April 22nd 2015. Dementia is a complex “syndrome” and as is often said, “when you meet one person with dementia, you have met one” meaning that no two persons with dementia are the same. Even in dementia care, Australia is a “lucky country” and there is much to be said for the quality and diversity of dementia care available for people living with dementia. Despite this, I agree with the many views expressed in the material I read that there is scope for improvement, especially in the way that services are coordinated. In saying that, I do not purport to have all the solutions nor claim to have the knowledge required to comment on all the programs covered by this review. If I appear to be a “biased” advocate for Alzheimer’s Australia across the States and Territories, it is because I have seen constant evidence of ordinary people doing extraordinary things with inadequate resources. Dementia care is not cheap and if those funding dementia services are primarily only interested in economic outcomes and benefits, the real purpose of this consultation will be defeated. In addition, nowhere in the material I have read is there any recognition that in many instances program funding is a complex mix of government (at all levels) and private funding. This makes reviewing those programs more complex and less able to be coordinated at a Departmental level. It goes without saying therefore that the Federal Government is not” the only player in this game”. Of all those participating in this review, Alzheimer’s Australia is best placed to comment on programs as it is more connected to people living with dementia and has probably the best record of consulting with them. It would appear however that their role has been reduced to that of a “bit player”. Without wanting to be critical, the Forum Report which deals with the comments made at a gathering of 70 individuals and organisations, only three (3) or 4.28% were actual carers of people living with dementia. Even if it is argued that a number of organisations present represented consumers, the percentage goes up only marginally to 8.57% which is hardly an endorsement of the forum being “consumer driven”. The predominance of those present were service providers, each with their own agenda and each seeking advantage for their “business”. The final point I want to make before commenting on more specific, program related issues, is that many programs being reviewed have a much longer history than is reflected in the material I have read. Their growth and development was pioneered by Alzheimer’s Australia organisations across the country often with no government funding. Attempts to bring about better coordination of programs were often at the behest of Alzheimer’s Australia but in the main were ignored. The opportunity to now put this right is long overdue.

Report on the Development and Validation of the Best Practice Decision Matrix

The Co-operative Research Centre for Construction Innovation (CRC-CI) is funding a project known as Value Alignment Process for Project Delivery. The project consists of a study of best practice project delivery and the development of a suite of products, resources and services to guide project teams towards the best procurement approach for a specific project or group of projects. These resources will be focused on promoting the principles that underlie best practice project delivery rather than simply identifying an off-the-shelf procurement system. This project builds on earlier work by Sidwell, Kennedy and Chan (2002), on re-engineering the construction delivery process, which developed a procurement framework in the form of a Decision Matrix

Book review : "Community engagement in contemporary legal education : Pro Bono, Clinical legal education and services learning"

The result of a forum on community engagement held in November 2008 at Bond University, Community Engagement in Contemporary Legal Education is a compilation of papers presented at the forum by academics and professionals throughout Australia. Although found initially to be a topic of legal interest, it was not until the reviewer came across the Council of Australian Law Deans (CALD) “Standards for Australian Law Schools” (adopted 17 November 20093) then the full importance and potential of this book was revealed. Clause 2.2.4 of the CALD Standards recognises the importance of “experiential learning opportunities” for law students and cites examples such as clinical programs, internships, practical experience and pro-bono work. Clause 2.3.3 acknowledges the need to develop professional ethics and again cites pro-bono obligations as an example. Clause 9.6.2 encourages interaction of law schools with the profession and the community and again, pro-bono community service is identified as one method of doing so. Yet nowhere in the document are there any uniform standards or binding obligations that law schools must commit to. In the current climate where the importance of practical experience is continually emphasised and student numbers exceed the number of available paid legal positions, there should be more focus on the details of how these commitments should be converted to be included in a law school’s curriculum.

A story worth telling : putting oral history and digital collections online in cultural institutions

Digital platforms in cultural institutions offer exciting opportunities for oral history and digital storytelling that can augment and enrich traditional collections. The way in which cultural institutions allow access to the public is changing dramatically, prompting substantial expansions of their oral history and digital story holdings. In Queensland, Australia, public libraries and museums are becoming innovative hubs of a wide assortment of collections that represent a cross-section of community groups and organisations through the integration of oral history and digital storytelling. The State Library of Queensland (SLQ) features digital stories online to encourage users to explore what the institution has in the catalogue through their website. Now SLQ also offers oral history interviews online, to introduce users to oral history and other components of their collections,- such as photographs and documents to current, as well as new users. This includes the various departments, Indigenous centres and regional libraries affiliated with SLQ statewide, who are often unable to access the materials held within, or even full information about, the collections available within the institution. There has been a growing demand for resources and services that help to satisfy community enthusiasm and promote engagement. Demand increases as public access to affordable digital media technologies increases, and as community or marginalised groups become interested in do it yourself (DIY) history; and SLQ encourages this. This paper draws on the oral history and digital story-based research undertaken by the Queensland University of Technology (QUT) for the State Library of Queensland including: the Apology Collection: The Prime Minister’s apology to Australia’s Indigenous Stolen Generation; Five Senses: regional Queensland artists; Gay history of Brisbane; and The Queensland Business Leaders Hall of Fame.

Information dependencies between architects and services engineers for early design evaluation : a framework for an energy design tool for architects

Effective strategies for the design of effi cient and environmentally sensitive buildings require a close collaboration between architects and engineers in the design of the building shell and environmental control systems at the outset of projects. However, it is often not practical for engineers to be involved early on in the design process. It is therefore essential that architects be able to perform preliminary energy analyses to evaluate their proposed designs prior to the major building characteristics becoming fi xed. Subsequently, a need exists for a simplifi ed energy design tool for architects. This paper discusses the limitations of existing analysis software in supporting early design explorations and proposes a framework for the development of a tool that provides decision support by permitting architects to quickly assess the performance of design alternatives.

The synergy of renewable energy technology and services to the public

This talk explores a new opportunity renewable energy technology has for society.

Understanding evaluation of learning support in mathematics and statistics

With rapid and continuing growth of learning support initiatives in mathematics and statistics found in many parts of the world, and with the likelihood that this trend will continue, there is a need to ensure that robust and coherent measures are in place to evaluate the effectiveness of these initiatives. The nature of learning support brings challenges for measurement and analysis of its effects. After briefly reviewing the purpose, rationale for, and extent of current provision, this article provides a framework for those working in learning support to think about how their efforts can be evaluated. It provides references and specific examples of how workers in this field are collecting, analysing and reporting their findings. The framework is used to structure evaluation in terms of usage of facilities, resources and services provided, and also in terms of improvements in performance of the students and staff who engage with them. Very recent developments have started to address the effects of learning support on the development of deeper approaches to learning, the affective domain and the development of communities of practice of both learners and teachers. This article intends to be a stimulus to those who work in mathematics and statistics support to gather even richer, more valuable, forms of data. It provides a 'toolkit' for those interested in evaluation of learning support and closes by referring to an on-line resource being developed to archive the growing body of evidence. © 2011 Taylor & Francis.

Enhancing public transport passenger experience via mobile-mediated applications and services

Despite the rapidly urbanising population, public transport usage in metropolitan areas is not growing at a level that corresponds to the trend. Many people are reluctant to travel using public transport, as it is commonly associated with unpleasant experiences such as limited services, long wait time, and crowded spaces. This study aims to explore the use of mobile spatial interactions and services, and investigate their potential to increase the enjoyment of our everyday commuting experience. The main goal is to develop and evaluate mobile-mediated design interventions to foster interactions for and among passengers, as well as between passengers and public transport infrastructures, with the aim to positively influence the experience of commuting. Ultimately, this study hopes to generate findings and knowledge towards creating a more enjoyable public transport experience, as well as to explore innovative uses of mobile technologies and context-aware services for the urban lifestyle.

Phantom Scatter and the A-SI EPID

Introduction: The use of amorphous-silicon electronic portal imaging devices (a-Si EPIDs) for dosimetry is complicated by the effects of scattered radiation. In photon radiotherapy, primary signal at the detector can be accompanied by photons scattered from linear accelerator components, detector materials, intervening air, treatment room surfaces (floor, walls, etc) and from the patient/phantom being irradiated. Consequently, EPID measurements which presume to take scatter into account are highly sensitive to the identification of these contributions. One example of this susceptibility is the process of calibrating an EPID for use as a gauge of (radiological) thickness, where specific allowance must be made for the effect of phantom-scatter on the intensity of radiation measured through different thicknesses of phantom. This is usually done via a theoretical calculation which assumes that phantom scatter is linearly related to thickness and field-size. We have, however, undertaken a more detailed study of the scattering effects of fields of different dimensions when applied to phantoms of various thicknesses in order to derive scattered-primary ratios (SPRs) directly from simulation results. This allows us to make a more-accurate calibration of the EPID, and to qualify the appositeness of the theoretical SPR calculations. Methods: This study uses a full MC model of the entire linac-phantom-detector system simulated using EGSnrc/BEAMnrc codes. The Elekta linac and EPID are modelled according to specifications from the manufacturer and the intervening phantoms are modelled as rectilinear blocks of water or plastic, with their densities set to a range of physically realistic and unrealistic values. Transmissions through these various phantoms are calculated using the dose detected in the model EPID and used in an evaluation of the field-size-dependence of SPR, in different media, applying a method suggested for experimental systems by Swindell and Evans [1]. These results are compared firstly with SPRs calculated using the theoretical, linear relationship between SPR and irradiated volume, and secondly with SPRs evaluated from our own experimental data. An alternate evaluation of the SPR in each simulated system is also made by modifying the BEAMnrc user code READPHSP, to identify and count those particles in a given plane of the system that have undergone a scattering event. In addition to these simulations, which are designed to closely replicate the experimental setup, we also used MC models to examine the effects of varying the setup in experimentally challenging ways (changing the size of the air gap between the phantom and the EPID, changing the longitudinal position of the EPID itself). Experimental measurements used in this study were made using an Elekta Precise linear accelerator, operating at 6MV, with an Elekta iView GT a-Si EPID. Results and Discussion: 1. Comparison with theory: With the Elekta iView EPID fixed at 160 cm from the photon source, the phantoms, when positioned isocentrically, are located 41 to 55 cm from the surface of the panel. At this geometry, a close but imperfect agreement (differing by up to 5%) can be identified between the results of the simulations and the theoretical calculations. However, this agreement can be totally disrupted by shifting the phantom out of the isocentric position. Evidently, the allowance made for source-phantom-detector geometry by the theoretical expression for SPR is inadequate to describe the effect that phantom proximity can have on measurements made using an (infamously low-energy sensitive) a-Si EPID. 2. Comparison with experiment: For various square field sizes and across the range of phantom thicknesses, there is good agreement between simulation data and experimental measurements of the transmissions and the derived values of the primary intensities. However, the values of SPR obtained through these simulations and measurements seem to be much more sensitive to slight differences between the simulated and real systems, leading to difficulties in producing a simulated system which adequately replicates the experimental data. (For instance, small changes to simulated phantom density make large differences to resulting SPR.) 3. Comparison with direct calculation: By developing a method for directly counting the number scattered particles reaching the detector after passing through the various isocentric phantom thicknesses, we show that the experimental method discussed above is providing a good measure of the actual degree of scattering produced by the phantom. This calculation also permits the analysis of the scattering sources/sinks within the linac and EPID, as well as the phantom and intervening air. Conclusions: This work challenges the assumption that scatter to and within an EPID can be accounted for using a simple, linear model. Simulations discussed here are intended to contribute to a fuller understanding of the contribution of scattered radiation to the EPID images that are used in dosimetry calculations. Acknowledgements: This work is funded by the NHMRC, through a project grant, and supported by the Queensland University of Technology (QUT) and the Royal Brisbane and Women's Hospital, Brisbane, Australia. The authors are also grateful to Elekta for the provision of manufacturing specifications which permitted the detailed simulation of their linear accelerators and amorphous-silicon electronic portal imaging devices. Computational resources and services used in this work were provided by the HPC and Research Support Group, QUT, Brisbane, Australia.

On governance structures for cloud resources and assessing their effectiveness

This research suggests information technology (IT) governance structures to manage cloud computing resources. The interest in acquiring IT resources as a utility from the cloud is gaining momentum. Cloud computing resources present organizations with opportunities to manage their IT expenditure on an ongoing basis, and are providing organizations access to modern IT resources to innovate and manage their continuity. However, cloud computing resources are no silver bullet. Organizations would need to have appropriate governance structures and policies in place to manage the cloud resources. The subsequent decisions from these governance structures will ensure effective management of cloud resources. This management will facilitate a better fit of cloud resources into organizations existing processes to achieve business (process-level) and financial (firm-level) objectives. Using a triangulation approach, we suggest four possible governance structures for managing the cloud computing resources. These structures are a chief cloud officer, a cloud management committee, a cloud service facilitation centre, and a cloud relationship centre. We also propose that these governance structures would relate to organizations cloud-related business objectives directly and indirectly to cloud-related financial objectives. Perceptive field survey data from actual and prospective cloud service adopters confirmed that the suggested structures would contribute directly to cloud-related business objectives and indirectly to cloud-related financial objectives.

An examination of the critical resources and internet capabilities for leveraging global performance in international entrepreneurial firms

This PhD research investigates the critical resources and Internet capabilities utilized by firms for leveraging global performance in entrepreneurial firms. Firm resources have been identified as important firm assets, which contribute to the firm's competitive global position. The Internet is a critical resource for a new generation of small and medium sized enterprise (SME) in pursuing international opportunities. By facilitating international business, the Internet has the ability to increase the quality and speed of communications, lower transaction costs, and facilitate the development of networks. Despite the increasing numbers of firms utilizing the Internet to pursue international opportunities, limited research remains. Adopting multiple case study methodology and structural equation modelling, the research identified the firm-level resources, which coincide with capabilities in a model predicting how international performance in firms is achieved.

Australia lawyer well-being : workplace demands, resources and the impact of time-billing targets

The purpose of the present study was to examine the types of workplace demands and resources experienced by full-time Australian lawyers, and the prevalence of a range of psychological outcomes. The study further focussed on the impact of time-billing targets on lawyers’ experience of these variables. Participants were 384 full-time Australian lawyers who completed an online questionnaire distributed by their Australian State or Territory Law Society. Analysis revealed that emphasis on profits within the workplace was the highest perceived demand, and the perception of social value in their work was the highest available resource. The results indicated that 37% of participants displayed Moderate to Extremely Severe depressive symptoms, and 35% were a positive screen for hazardous or harmful drinking. A series of three multivariate analyses of variance revealed significant differences between non-billers, low-to-moderate billers and high billers, with high billers experiencing greater demands, fewer resources and poorer psychological outcomes. The practical applications of these results for the legal profession are discussed.

The role of intellectual resources, product innovation capability, reputational resources and marketing capability combinations in SME growth

This article examines the extent to which combinations of intellectual resources and product innovation capability, and reputational resources and marketing capability, influence the ability of small and medium-sized enterprises (SME) to meet or exceed performance goals. Empirical results drawn from 171 SMEs suggest that when the combination of intellectual resources and product innovation capability in addition to the combination of reputational resources and marketing capability are high, SME growth is enhanced. However, a high level of intellectual resources combined with a low level of product innovation capability as well as a combination of a high level of reputational resources with a low level of marketing capability (and vice versa) are not significantly related to growth. These results imply that a high level of resources cannot compensate for a low level of capabilities (and vice versa).