Understanding QC and EQA : an authentic learning model for undergraduate students (Conference Abstract)

Introduction QC and EQA are integral to good pathology laboratory practice. Medical Laboratory Science students undertake a project exploring internal QC and EQA procedures used in chemical pathology laboratories. Each student represents an individual lab and the class group represents the peer group of labs performing the same assay using the same method. Methods Using a manual BCG assay for serum albumin, normal and abnormal controls are run with a patient sample over 7 weeks. The QC results are assessed each week using calculated z-scores and both 2S & 3S control rules to determine whether a run is ‘in control’. At the end of the 7 weeks a completed LJ chart is assessed using the Westgard Multirules. Students investigate causes of error and the implications for both lab practice and patient care if runs are not ‘in control’. Twice in the 7 weeks two EQA samples (with target values unknown) are assayed alongside the weekly QC and patient samples. Results from each student are collated and form the basis of an EQA program. ALP are provided and students complete a Youden Plot, which is used to analyse the performance of each ‘lab’ and the method to identify bias. Students explore the concept of possible clinical implications of a biased method and address the actions that should be taken if a lab is not in consensus with the peer group. Conclusion This project is a model of ‘real world’ practice in which student demonstrate an understanding of the importance of QC procedures in a pathology laboratory, apply and interpret statistics and QC rules and charts, apply critical thinking and analytical skills to quality performance data to make recommendations for further practice and improve their technical competence and confidence.

Performance-Based Quality Assurance/Quality Control (QA/QC) Acceptance Procedures for In-Place Soil Testing Phase 3

One of the objectives of this study was to evaluate soil testing equipment based on its capability of measuring in-place stiffness or modulus values. As design criteria transition from empirical to mechanistic-empirical, soil test methods and equipment that measure properties such as stiffness and modulus and how they relate to Florida materials are needed. Requirements for the selected equipment are that they be portable, cost effective, reliable, a ccurate, and repeatable. A second objective is that the selected equipment measures soil properties without the use of nuclear materials.The current device used to measure soil compaction is the nuclear density gauge (NDG). Equipment evaluated in this research included lightweight deflectometers (LWD) from different manufacturers, a dynamic cone penetrometer (DCP), a GeoGauge, a Clegg impact soil tester (CIST), a Briaud compaction device (BCD), and a seismic pavement analyzer (SPA). Evaluations were conducted over ranges of measured densities and moistures.Testing (Phases I and II) was conducted in a test box and test pits. Phase III testing was conducted on materials found on five construction projects located in the Jacksonville, Florida, area. Phase I analyses determined that the GeoGauge had the lowest overall coefficient of variance (COV). In ascending order of COV were the accelerometer-type LWD, the geophone-type LWD, the DCP, the BCD, and the SPA which had the highest overall COV. As a result, the BCD and the SPA were excluded from Phase II testing.In Phase II, measurements obtained from the selected equipment were compared to the modulus values obtained by the static plate load test (PLT), the resilient modulus (MR) from laboratory testing, and the NDG measurements. To minimize soil and moisture content variability, the single spot testing sequence was developed. At each location, test results obtained from the portable equipment under evaluation were compared to the values from adjacent NDG, PLT, and laboratory MR measurements. Correlations were developed through statistical analysis. Target values were developed for various soils for verification on similar soils that were field tested in Phase III. The single spot testing sequence also was employed in Phase III, field testing performed on A-3 and A-2-4 embankments, limerock-stabilized subgrade, limerock base, and graded aggregate base found on Florida Department of Transportation construction projects. The Phase II and Phase III results provided potential trend information for future research—specifically, data collection for in-depth statistical analysis for correlations with the laboratory MR for specific soil types under specific moisture conditions. With the collection of enough data, stronger relationships could be expected between measurements from the portable equipment and the MR values. Based on the statistical analyses and the experience gained from extensive use of the equipment, the combination of the DCP and the LWD was selected for in-place soil testing for compaction control acceptance. Test methods and developmental specifications were written for the DCP and the LWD. The developmental specifications include target values for the compaction control of embankment, subgrade, and base materials.

Etapas del cambio en personas inactivas tras un programa de promoción de la actividad física en Atención Primaria

Objetivo El objetivo del estudio fue evaluar las Etapas del cambio en relación con la actividad física y el estado de salud general entre personas que participaron en un Programa de promoción de la actividad física (PPAF) de 12 semanas frente a un grupo control. Diseño Ensayo clínico aleatorizado. Participantes Noventa y ocho personas inactivas de ambos sexos con una edad media de 62,82 años procedentes de 2 centros de Atención Primaria del Distrito Sanitario Costa del Sol. Intervención Un PPAF organizado en grupos y siguiendo los criterios del Colegio Americano de Medicina del Deporte, 2 sesiones semanales de 60 min durante 12 semanas. Mediciones principales La variable principal de resultado fue resistencia al cambio en relación con la actividad física. La variable secundaria fue el estado de salud general (componentes físicos y mentales), determinado con el cuestionario de salud general SF12. Resultados Se encontraron diferencias significativas en las etapas del cambio a favor del grupo experimental (p < 0,05). No se encontraron diferencias estadísticamente significativas entre grupos después de la intervención en el estado general de salud. Conclusión Las etapas del cambio se modificaron en las personas inactivas que realizaron el PPAF en Atención Primaria. Futuros estudios son necesarios para identificar qué factores del entorno de los participantes influyen en la resistencia al cambio de la actividad física. Abstract Objective This study has aimed to evaluate the stages of change in relation to physical activity and overall health status among persons who participated in a 12-week Physical activity promotion program (PAPP) compared to a control group. Design Randomized clinical trial. Participants The study included 98 inactive persons of both sexes with a mean age of 62.82 years from 2 of Primary Care Centers of the Malaga Health Care District. Interventions A PAPP organized in groups according to the American College of Sports Medicine criteria including two weekly sessions of 60 minutes each for 3 months. Main measures The primary outcome was to assess resistance to change in relation to physical activity. The secondary variable was overall health (physical and mental components) determined with the SF12 general health questionnaire. Results Significant differences were found in the stages of change (P<.05). There were no significant differences found in general health status improvement in regards to the initial assessment. Conclusion The stages of change were modified in the inactive persons who carried out the PAPP in Primary Care. Future studies are needed to identify which environmental factors influence the resistance to change in physical activity of the participants.

Cambios hematológicos tras un programa de promoción de actividad física en sujetos inactivos. Ensayo aleatorizado controlado

Objetivo Comparar los cambios antropométricos y bioquímicos en personas inactivas, que realizan un programa de actividad física frente a los que no lo realizan desde los Centros de Atención Primaria. Métodos Cien personas inactivas de ambos sexos, mayores de 55 años fueron aleatorizadas a un grupo experimental (n = 50) y a un grupo control (n = 50). Se realizó un programa de promoción de actividad física siguiendo los criterios del Colegio Americano de Medicina del Deporte, de 60 min cada sesión, 2 sesiones por semana, durante 3 meses. Las medidas antropométricas incluyeron el índice de masa corporal y el porcentaje graso, y como variables bioquímicas el perfil lipídico, hematíes y la creatina kinasa. Resultados Completaron el estudio 75 personas. Esta investigación no presentó cambios significativos a nivel antropométrico, ni en las variables bioquímicas del perfil lipídico. Sí se observaron efectos clínicamente relevantes en la concentración de los hematíes de las mujeres que realizaron dicho programa. Conclusiones El efecto clínico global fue pequeño en las personas que realizaron el programa, pero relevante para la salud de la población. Esta intervención produce efectos a corto plazo en la bioquímica de las personas inactivas. Abstract in English Objective Compare anthropometry and biochemical changes in inactive people who participate in a physical activity program versus those who do not from the Primary Health Care Centers. Methods One hundred inactive subjects of both genders, 55 years and older, from Torremolinos, Spain were randomized into an experimental group (n = 50) and a control group (n = 50). A program promoting physical activity was carried out following the American Medical Society for Sport's Medicine criteria. The program included sessions a week for 3 months. Antropometric measurements included body mass index and fat percentage, and such as biochemical measures: the lipid profile, erythrocytes, and creatine kinase. Results Seventy-five persons completed the study. This research did not show significant changes to anthropometric or biochemical outcomes of the lipid profile. However, there were clinically relevant effects regarding red blood cells concentration in the women who participated in this program. Conclusions Overall clinical effect was small in those participating in the program, but relevant for the health of the population. This program has short-term effects on biochemistry results of inactive subjects.

Scientists in Control: a progressive approach to preparing work ready graduates in QC, EQA and method evaluation

Introduction QC, EQA and method evaluation are integral to delivery of quality patient results. To ensure QUT graduates have a solid grounding in these key areas of practice, a theory-to-practice approach is used to progressively develop and consolidate these skills. Methods Using a BCG assay for serum albumin, each student undertakes an eight week project analysing two levels of QC alongside ‘patient’ samples. Results are assessed using both single rules and Multirules. Concomitantly with the QC analyses, an EQA project is undertaken; students analyse two EQA samples, twice in the semester. Results are submitted using cloud software and data for the full ‘peer group’ returned to students in spreadsheets and incomplete Youden plots. Youden plots are completed with target values and calculated ALP values and analysed for ‘lab’ and method performance. The method has a low-level positive bias, which leads to the need to investigate an alternative method. Building directly on the EQA of the first project and using the scenario of a lab that services renal patients, students undertake a method validation comparing BCP and BCG assays in another eight-week project. Precision and patient comparison studies allow students to assess whether the BCP method addresses the proportional bias of the BCG method and overall is a ‘better’ alternative method for analysing serum albumin, accounting for pragmatic factors, such as cost, as well as performance characteristics. Results Students develop understanding of the purpose and importance of QC and EQA in delivering quality results, the need to optimise testing to deliver quality results and importantly, a working knowledge of the analyses that go into ensuring this quality. In parallel to developing these key workplace competencies, students become confident, competent practitioners, able to pipette accurately and precisely and organise themselves in a busy, time pressured work environment.