Union strategies in representing ‘new workers’ : the case of UK retail union

The purpose of this paper is to explore the changing nature of employee voice through trade union representation in the retail industry. The retail industry is a major employer in the UK and is one of the few private sector service industries with union representation (Griffin et al 2003). The requisite union: the Distributive and Allied Workers (USDAW) union is one of the biggest unions in the country. However, the characteristics of the industry provide unique challenges for employee voice and representation including: high labour turnover; high use of casual, female and student labour; and, variable levels of union recognition (Reynolds et al 2005). Irrespective of these challenges, any extension of representation and organisation by unions in the retail sector is inherently valuable, socially and politically, given that retail workers are often categorised as vulnerable, due to the fact that they are among the lowest paid in the economy, sourced from disadvantages labour markets and increasingly subject to atypical employment arrangements (Broadbridge 2002; Henley 2006; Lynch 2005; Roan 2003).

Union strategies in representing ‘new’ workers : the comparative case of UK and Australian retail unions

This paper is a comparative exploratory study of the changing nature of employee voice through trade union representation in the retail industry in the UK and Australia. In both countries, the retail industry is a major employer and is one of the few private sector service industries with significant union membership (Griffin et al 2003). The relevant unions, the Distributive and Allied Workers Union (USDAW) and the Shop, Distributive and Allied Union (SDA), are the fourth largest and largest unions in the UK and Australia respectively. However, despite this seeming numerical strength in membership, the characteristics of the industry provide unique challenges for employee voice and representation. The significance of the study is that any extension of representation and organisation by unions in the retail sector is valuable socially and politically, given that retail workers are often categorised a s vulnerable, due to their low pay, the predominance of disadvantaged labour market groups such a s women and young people, workers’ atypical employment arrangements and, in the case of the UK, variable levels of union recognition which inhibit representation (Broadbridge 2002; Henley 2006; Lynch 2005; Roan & Diamond 2003; Reynolds et al 2005). In addition, specifically comparative projects have value in that they allow some variables relating to the ‘industry’ to be held constant, thus reducing the range of potential explanations of differences in union strategy. They also have value in that the research partners may be more likely to notice and problematise taken-for-granted aspects of practices in another country, thus bringing to the fore key features and potentially leading to theoretical innovation. Finally, such projects may assist in transnational diffusion of union strategy.

Remediation strategies of shaft and common mode voltages in adjustable speed drive systems

AC motors are largely used in a wide range of modern systems, from household appliances to automated industry applications such as: ventilations systems, fans, pumps, conveyors and machine tool drives. Inverters are widely used in industrial and commercial applications due to the growing need for speed control in ASD systems. Fast switching transients and the common mode voltage, in interaction with parasitic capacitive couplings, may cause many unwanted problems in the ASD applications. These include shaft voltage and leakage currents. One of the inherent characteristics of Pulse Width Modulation (PWM) techniques is the generation of the common mode voltage, which is defined as the voltage between the electrical neutral of the inverter output and the ground. Shaft voltage can cause bearing currents when it exceeds the amount of breakdown voltage level of the thin lubricant film between the inner and outer rings of the bearing. This phenomenon is the main reason for early bearing failures. A rapid development in power switches technology has lead to a drastic decrement of switching rise and fall times. Because there is considerable capacitance between the stator windings and the frame, there can be a significant capacitive current (ground current escaping to earth through stray capacitors inside a motor) if the common mode voltage has high frequency components. This current leads to noises and Electromagnetic Interferences (EMI) issues in motor drive systems. These problems have been dealt with using a variety of methods which have been reported in the literature. However, cost and maintenance issues have prevented these methods from being widely accepted. Extra cost or rating of the inverter switches is usually the price to pay for such approaches. Thus, the determination of cost-effective techniques for shaft and common mode voltage reduction in ASD systems, with the focus on the first step of the design process, is the targeted scope of this thesis. An introduction to this research – including a description of the research problem, the literature review and an account of the research progress linking the research papers – is presented in Chapter 1. Electrical power generation from renewable energy sources, such as wind energy systems, has become a crucial issue because of environmental problems and a predicted future shortage of traditional energy sources. Thus, Chapter 2 focuses on the shaft voltage analysis of stator-fed induction generators (IG) and Doubly Fed Induction Generators DFIGs in wind turbine applications. This shaft voltage analysis includes: topologies, high frequency modelling, calculation and mitigation techniques. A back-to-back AC-DC-AC converter is investigated in terms of shaft voltage generation in a DFIG. Different topologies of LC filter placement are analysed in an effort to eliminate the shaft voltage. Different capacitive couplings exist in the motor/generator structure and any change in design parameters affects the capacitive couplings. Thus, an appropriate design for AC motors should lead to the smallest possible shaft voltage. Calculation of the shaft voltage based on different capacitive couplings, and an investigation of the effects of different design parameters are discussed in Chapter 3. This is achieved through 2-D and 3-D finite element simulation and experimental analysis. End-winding parameters of the motor are also effective factors in the calculation of the shaft voltage and have not been taken into account in previous reported studies. Calculation of the end-winding capacitances is rather complex because of the diversity of end winding shapes and the complexity of their geometry. A comprehensive analysis of these capacitances has been carried out with 3-D finite element simulations and experimental studies to determine their effective design parameters. These are documented in Chapter 4. Results of this analysis show that, by choosing appropriate design parameters, it is possible to decrease the shaft voltage and resultant bearing current in the primary stage of generator/motor design without using any additional active and passive filter-based techniques. The common mode voltage is defined by a switching pattern and, by using the appropriate pattern; the common mode voltage level can be controlled. Therefore, any PWM pattern which eliminates or minimizes the common mode voltage will be an effective shaft voltage reduction technique. Thus, common mode voltage reduction of a three-phase AC motor supplied with a single-phase diode rectifier is the focus of Chapter 5. The proposed strategy is mainly based on proper utilization of the zero vectors. Multilevel inverters are also used in ASD systems which have more voltage levels and switching states, and can provide more possibilities to reduce common mode voltage. A description of common mode voltage of multilevel inverters is investigated in Chapter 6. Chapter 7 investigates the elimination techniques of the shaft voltage in a DFIG based on the methods presented in the literature by the use of simulation results. However, it could be shown that every solution to reduce the shaft voltage in DFIG systems has its own characteristics, and these have to be taken into account in determining the most effective strategy. Calculation of the capacitive coupling and electric fields between the outer and inner races and the balls at different motor speeds in symmetrical and asymmetrical shaft and balls positions is discussed in Chapter 8. The analysis is carried out using finite element simulations to determine the conditions which will increase the probability of high rates of bearing failure due to current discharges through the balls and races.

Industrial land price and its impact on urban growth : a Chinese case study

China is experiencing rapid progress in industrialization, with its own rationale toward industrial land development based on a deliberate change from an extensive to intensive form of urban land use. One result has been concerted attempts by local government to attract foreign investment by a low industrial land price strategy, which has resulted in a disproportionally large amount of industrial land within the total urban land use structure at the expense of the urban sprawl of many cities. This paper first examines “Comparable Benchmark Price as Residential land use” (CBPR) as the theoretical basis of the low industrial land price phenomenon. Empirical findings are presented from a case study based on data from Jinyun County, China. These data are analyzed to reveal the rationale of industrial land price from 2000 to 2010 concerning the CBPR model. We then explore the causes of low industrial land prices in the form of a “Centipede Game Model”, involving two neighborhood regions as “major players” to make a set of moves (or strategies). When one of the players unilaterally reduces the land price to attract investment with the aim to maximize profits arising from the revenues generated from foreign investment and land premiums, a two-player price war begins in the form of a dynamic game, the effect of which is to produce a downward spiral of prices. In this context, the paradox of maximizing profits for each of the two players are not accomplished due to the inter-regional competition of attracted investment leading to a lose-lose situation for both sides’ in competing for land premium revenues. A short-term solution to the problem is offered involving the establishment of inter-regional cooperative partnerships. For the longer term, however, a comprehensive reform of the local financial system, more adroit regional planning and an improved means of evaluating government performance is needed to ensure the government's role in securing pubic goods is not abandoned in favor of one solely concerned with revenue generation.