Modelling of Electric Fields

South Africa has an electrical transmission grid of over 25 000 km of overhead power lines with voltages of 132 kV to 765 kV. The grid has been largely designed and built by the power utility, Eskom. This book embodies the planning philosophies, design principles and construction practices of Eskom. It is the culmination of decades of thought, study, research and the practical experience of many overhead power line engineers and researchers. The book covers the main aspects of overhead power line design and construction, from electrical first principles, system planning, insulation co-ordination (including live line working), mechanical design through to environmental impact management and power line communications. The content emphasises the need for close interaction between all technical disciplines involved and the importance of optimising designs for economy and performance. Additional challenges in South Africa are the relatively high altitude of the interior plateau (1 000 m to 1 700 m above sea level), severe lightning in some areas and long transmission distances. The book explains how these factors are accommodated in modern designs. Other advanced work covered includes the use and understanding of polymeric insulators, the judicious reduction of phase-to-phase spacings and the adoption of guyed structures.

Towards Bayesian experimental design for nonlinear models that require a large number of sampling times

The use of Bayesian methodologies for solving optimal experimental design problems has increased. Many of these methods have been found to be computationally intensive for design problems that require a large number of design points. A simulation-based approach that can be used to solve optimal design problems in which one is interested in finding a large number of (near) optimal design points for a small number of design variables is presented. The approach involves the use of lower dimensional parameterisations that consist of a few design variables, which generate multiple design points. Using this approach, one simply has to search over a few design variables, rather than searching over a large number of optimal design points, thus providing substantial computational savings. The methodologies are demonstrated on four applications, including the selection of sampling times for pharmacokinetic and heat transfer studies, and involve nonlinear models. Several Bayesian design criteria are also compared and contrasted, as well as several different lower dimensional parameterisation schemes for generating the many design points.

Interpretation of morphological data to inform design Bridge to Bridge: Ridge to Ridge urban design workshop

The importance of design practice informed by urban morphology has led to intensification in interest, signalled by the formation of the ISUF Research and Practice Task Force and voiced through several recent academic publications cognisant of this current debate, this paper reports on a recent urban design workshop at which morphology was set as one of the key themes. Initially planned to be programmed as a augmented concurrent event to the 2013 20th ISUF conference held in Brisbane, the two day Bridge to Bridge: Ridge to Ridge urban design workshop nevertheless took place the following month, and involved over one hundred design professionals and academics. The workshop sought to develop several key urban design principles and recommendations addressing a major government development proposal sited in the most important heritage precinct of the city. The paper will focus specifically on one of the nine groups, in which the design proposal was purposefully guided by morphological input. The discussion will examine the design outcomes and illicit review and feedback from participants, shedding critical light on the issues that arise from such a design approach.

From mundane to smart: Exploring interactions with ‘smart' design objects

In addition to functional and technological features, the role of augmented objects should also be seen in terms of how effectively they fit into the everyday practices of users and how they enhance users' experiences. In this article, the authors introduce a low-tech, internet-of-things technology called CAM (Cooperative Artefact Memory) that is used as a collaborative tool in design studio environments. CAM works as an object memory technology and allows industrial and product designers to collaboratively store relevant information onto their physical design objects, such as sketches, collages, storyboards, and physical mock-ups in the form of messages, annotations and external web links. In the context of this study, CAM serves as an important probing device to understand designers' interaction and experiences with augmented design objects, in their natural environment. The authors carried out a small-scale field trial of CAM in an academic design studio, over three student design projects. In this article, they discuss the findings of their field trial and show how CAM was used by the participants, how it was integrated into the design process and how it was appropriated for different purposes. The authors also found that CAM supported coordination and awareness within the design teams, yet its serendipitous and asynchronous nature facilitated creative and playful interactions between team members. In general, the results show how CAM transformed mundane design objects into “smart” objects that made the creative and playful side of cooperative design visible.

Optimal mission path planning (MPP) for an air sampling unmanned aerial system

This paper presents advanced optimization techniques for Mission Path Planning (MPP) of a UAS fitted with a spore trap to detect and monitor spores and plant pathogens. The UAV MPP aims to optimise the mission path planning search and monitoring of spores and plant pathogens that may allow the agricultural sector to be more competitive and more reliable. The UAV will be fitted with an air sampling or spore trap to detect and monitor spores and plant pathogens in remote areas not accessible to current stationary monitor methods. The optimal paths are computed using a Multi-Objective Evolutionary Algorithms (MOEAs). Two types of multi-objective optimisers are compared; the MOEA Non-dominated Sorting Genetic Algorithms II (NSGA-II) and Hybrid Game are implemented to produce a set of optimal collision-free trajectories in three-dimensional environment. The trajectories on a three-dimension terrain, which are generated off-line, are collision-free and are represented by using Bézier spline curves from start position to target and then target to start position or different position with altitude constraints. The efficiency of the two optimization methods is compared in terms of computational cost and design quality. Numerical results show the benefits of coupling a Hybrid-Game strategy to a MOEA for MPP tasks. The reduction of numerical cost is an important point as the faster the algorithm converges the better the algorithms is for an off-line design and for future on-line decisions of the UAV.

Signalling layout for fixed-block railway lines with real-coded genetic algorithms.

Signalling layout design is one of the keys to railway operations with fixed-block signalling system and it also carries direct effect on overall train efficiency and safety. Based on an analysis to system objectives, this paper presents an optimization model with two objectives in order to devise an efficient signalling layout scheme. Taking into account the present railway line design practices in China, the paper describes steps of the computer-based signalling layout optimisation with real-coded genetic algorithms. A computer-aided system, based on train movement simulator, has also been employed to assist the optimisation process. A case study on a practical railway line has been conducted to make comparisons between the proposed GA-based approach and the current practices. The results illustrate the improved performance of the proposed approach in reducing signal block joints and shortening minimum train service headway.

Clinical impacts of mammalian target of rapamycin expression in human colorectal cancers

This study investigated the clinicopathologic roles of mammalian target of rapamycin (mTOR) expression and its relationship to carcinogenesis and tumor progression in a colorectal adenoma-adenocarcinoma model. Two colon cancer cell lines with different pathologic stages (SW480 and SW48) and 1 normal colonic epithelial cell line (FHC) were used, in addition to 119 colorectal adenocarcinomas and 32 adenomas. mTOR expression profiles at messenger RNA (mRNA) and protein levels were investigated in the cells and tissues using real-time quantification polymerase chain reaction and immunohistochemistry. The findings were correlated with the clinicopathologic features of the tumors. The colon cell line from stage III cancer (SW48) showed higher expression of mTOR mRNA than that from stage II cancer (SW480). At the tissue level, mTOR showed higher mRNA and protein expression in colorectal carcinoma than in adenoma. The mRNA and protein expression was correlated with each other in approximately one-third of the carcinomas and adenomas. High levels of mTOR mRNA expression were noted more in carcinoma or adenoma arising from the distal portion of the large intestine (P = .025 and .019, respectively). Within the colorectal cancer population, a high level of expression of mTOR mRNA was related to the presence of lymph node metastases (P = .031), advanced pathologic stage (P = .05), and presence of persistent disease or tumor recurrence (P = .035). To conclude, the study has indicated that mTOR is likely to be involved in the development and progression of colorectal cancer and is linked to cancer initiation, invasiveness, and progression.

Reciprocal habituation : a study of older people and the Kinect

We explore relationships between habits and technology interaction by reporting on older people's experience of the Kinect for Xbox. We contribute to theoretical and empirical understandings of habits in the use of technology to inform understanding of the habitual qualities of our interactions with computing technologies, particularly systems exploiting natural user interfaces. We situate ideas of habit in relation to user experience and usefulness in interaction design, and draw on critical approaches to the concept of habit from cultural theory to understand the embedded, embodied, and situated contexts in our interactions with technologies. We argue that understanding technology habits as a process of reciprocal habituation in which people and technologies adapt to each other over time through design, adoption, and appropriation offers opportunities for research on user experience and interaction design within human-computer interaction, especially as newer gestural and motion control interfaces promise to reshape the ways in which we interact with computers.

Association of hearing impairment and subsequent driving mobility in older adults

- Purpose of the study Hearing impairment (HI) is associated with driving safety (e.g., increased crashes and poor on-road driving performance). However, little is known about HI and driving mobility. This study examined the longitudinal association of audiometric hearing with older adults’ driving mobility over three years. - Design and Methods Secondary data analyses were conducted of 500 individuals (63-90 years) from the Staying Keen in Later Life (SKILL) study. Hearing (pure tone average of 0.5, 1, and 2 kHz) was assessed in the better hearing ear and categorized into normal hearing <25 dB HL; mild HI 26-40 dB HL; or moderate and greater HI>41 dB HL. The Useful Field of View Test (UFOV) was used to estimate the risk for adverse driving events. MANCOVA compared driving mobility between HI levels across time, adjusting for age, sex, race, hypertension, and stroke. Adjusting for these same covariates, Cox regression analyses examined incidence of driving cessation by HI across three years. - Results Individuals with moderate or greater HI performed poorly on the UFOV, indicating increased risk for adverse driving events (p<.001). No significant differences were found among older adults with varying levels of HI for driving mobility (ps>.05), including driving cessation rates (p=.38), across time. - Implications Although prior research indicates older adults with HI may be at higher risk for crashes, they may not modify driving over time. Further exploration of this issue is required to optimize efforts to improve driving safety and mobility among older adults.

Lower limb amputation in Northern Netherlands: Unchanged incidence from 1991-1992 to 2003-2004

Background Investigating population changes gives insight into effectiveness and need for prevention and rehabilitation services. Incidence rates of amputation are highly varied, making it difficult to meaningfully compare rates between studies and regions or to compare changes over time. Study Design Historical cohort study of transtibial amputation, knee disarticulation, and transfemoral amputations resulting from vascular disease or infection, with/without diabetes, in 2003-2004, in the three Northern provinces of the Netherlands. Objectives To report the incidence of first transtibial amputation, knee disarticulation, or transfemoral amputation in 2003-2004 and the characteristics of this population, and to compare these outcomes to an earlier reported cohort from 1991 to 1992. Methods Population-based incidence rates were calculated per 100,000 person-years and compared across the two cohorts. Results Incidence of amputation was 8.8 (all age groups) and 23.6 (≥45 years) per 100,000 person-years. This was unchanged from the earlier study of 1991-1992. The relative risk of amputation was 12 times greater for people with diabetes than for people without diabetes. Conclusions Investigation is needed into reasons for the unchanged incidence with respect to the provision of services from a range of disciplines, including vascular surgery, diabetes care, and multidisciplinary foot clinics. Clinical relevance This study shows an unchanged incidence of amputation over time and a high risk of amputation related to diabetes. Given the increased prevalence of diabetes and population aging, both of which present an increase in the population at risk of amputation, finding methods for reducing the rate of amputation is of importance.

Technology, design and process innovation in the built environment

Buildings and infrastructure represent principal assets of any national economy as well as prime sources of environmental degradation. Making them more sustainable represents a key challenge for the construction, planning and design industries and governments at all levels; and the rapid urbanisation of the 21st century has turned this into a global challenge. This book embodies the results of a major research programme by members of the Australia Co-operative Research Centre for Construction Innovation and its global partners, presented for an international audience of construction researchers, senior professionals and advanced students. It covers four themes, applied to regeneration as well as to new build, and within the overall theme of Innovation: Sustainable Materials and Manufactures, focusing on building material products, their manufacture and assembly – and the reduction of their ecological ‘fingerprints’, the extension of their service lives, and their re-use and recyclability. It also explores the prospects for applying the principles of the assembly line. Virtual Design, Construction and Management, viewed as increasing sustainable development through automation, enhanced collaboration (such as virtual design teams), real time BL performance assessment during design, simulation of the construction process, life-cycle management of project information (zero information loss) risk minimisation, and increased potential for innovation and value adding. Integrating Design, Construction and Facility Management over the Project Life Cycle, by converging ICT, design science engineering and sustainability science. Integration across spatial scales, enabling building–infrastructure synergies (such as water and energy efficiency). Convergences between IT and design and operational processes are also viewed as a key platform increased sustainability.

Design of compact coupled-line couplers

The size of rat-race and branch-line couplers can be reduced by using periodic loading or artificial transmission lines. The objective of this work is to extend the idea of size reduction through periodic loading to coupled-line 90° hybrids. A procedure for the extraction of the characteristic parameters of a coupled-line 4-port from a single set of S-parameters is described. This method can be employed to design of coupled artificial transmission line couplers of arbitrary geometry. The procedure is illustrated through the design a broadside-coupled stripline hybrid, periodically loaded with stubs. Measured results for a prototype coupler confirm the validity of the theory.

‘Spotty Dick’ : a research experiment to test design suitability for the use of jewelled spot matrix patterns for UV aware men’s swimwear

The great male Aussie cossie is growing spots. The ‘dick’ tog, as it is colloquially referred to, is linked to Australia’s national identify with overtly masculine bronzed Aussie bodies clothed in this iconic apparel. Yet the reality is our hunger for worshiping the sun and the addiction to a beach lifestyle is tempered by the pragmatic need for neck-to-knee, or more apt head-to-toe, swimwear. Spotty Dick is an irreverent play on male swimwear – it experiments with alternate modes to sheath the body with Lyrca in order to protect it from searing UV’s and at the same time light-heartedly fools around with texture and pattern; to be specific, black Scharovsky crystals, jewelled in spot patterns - jewelled clothing is not characteristically aligned to menswear and even less so to the great Aussie cossie. The crystals form a matrix of spots that attempt to provoke a sense of mischievousness aligned to the Aussie beach larrikin. Ironically, spot patterns are in itself a form of a parody, as prolonged sun exposure ages the skin and sun spots can occur if appropriate sun protection is not used. ‘Spotty Dick’ – a research experiment to test design suitability for the use of jewelled spot matrix patterns for UV aware men’s swimwear. The creative work was paraded at 56 shows, over a 2 week period, and an estimated 50,000 people viewed the work.

Transit line passenger transmission and productiveness under high load conditions

Deterministic transit capacity analysis applies to planning, design and operational management of urban transit systems. The Transit Capacity and Quality of Service Manual (1) and Vuchic (2, 3) enable transit performance to be quantified and assessed using transit capacity and productive capacity. This paper further defines important productive performance measures of an individual transit service and transit line. Transit work (p-km) captures the transit task performed over distance. Passenger transmission (p-km/h) captures the passenger task delivered by service at speed. Transit productiveness (p-km/h) captures transit work performed over time. These measures are useful to operators in understanding their services’ or systems’ capabilities and passenger quality of service. This paper accounts for variability in utilized demand by passengers along a line and high passenger load conditions where passenger pass-up delay occurs. A hypothetical case study of an individual bus service’s operation demonstrates the usefulness of passenger transmission in comparing existing and growth scenarios. A hypothetical case study of a bus line’s operation during a peak hour window demonstrates the theory’s usefulness in examining the contribution of individual services to line productive performance. Scenarios may be assessed using this theory to benchmark or compare lines and segments, conditions, or consider improvements.

Design and implementation of wideband baluns for Archimedean spiral antennas

The demand for high-speed data services for portable device has become a driving force for development of advanced broadband access technologies. Despite recent advances in broadband wireless technologies, there remain a number of critical issues to be resolved. One of the major concerns is the implementation of compact antennas that can operate in a wide frequency band. Spiral antenna has been used extensively for broadband applications due to its planar structure, wide bandwidth characteristics and circular polarisation. However, the practical implementation of spiral antennas is challenged by its high input characteristic impedance, relatively low gain and the need for balanced feeding structures. Further development of wideband balanced feeding structures for spiral antennas with matching impedance capabilities remain a need. This thesis proposes three wideband feeding systems for spiral antennas which are compatible with wideband array antenna geometries. First, a novel tapered geometry is proposed for a symmetric coplanar waveguide (CPW) to coplanar strip line (CPS) wideband balun. This balun can achieve the unbalanced to balanced transformation while matching the high input impedance of the antenna to a reference impedance of 50 . The discontinuity between CPW and CPS is accommodated by using a radial stub and bond wires. The bandwidth of the balun is improved by appropriately tapering the CPW line instead of using a stepped impedance transformer. Next, the tapered design is applied to an asymmetric CPW to propose a novel asymmetric CPW to CPS wideband balun. The use of asymmetric CPW does away with the discontinuities between CPW and CPS without having to use a radial stub or bond wires. Finally, a tapered microstrip line to parallel striplines balun is proposed. The balun consists of two sections. One section is the parallel striplines which are connected to the antenna, with the impedance of balanced line equal to the antenna input impedance. The other section consists of a microstrip line where the width of the ground plane is gradually reduced to eventually resemble a parallel stripline. The taper accomplishes the mode and impedance transformation. This balun has significantly improved bandwidth characteristics. Characteristics of proposed feeding structures are measured in a back-to-back configuration and compared to simulated results. The simulated and measured results show the tapered microstrip to parallel striplines balun to have more than three octaves of bandwidth. The tapered microstrip line to parallel striplines balun is integrated with a single Archimedean spiral antenna and with an array of spiral antennas. The performance of the integrated structures is simulated with the aid of electromagnetic simulation software, and results are compared to measurements. The back-to-back microstrip to parallel strip balun has a return loss of better than 10 dB over a wide bandwidth from 1.75 to 15 GHz. The performance of the microstrip to parallel strip balun was validated with the spiral antennas. The results show the balun to be an effective mean of feeding network with a low profile and wide bandwidth (2.5 to 15 GHz) for balanced spiral antennas.