Order statistic filters for image matching

The rank and census are two filters based on order statistics which have been applied to the image matching problem for stereo pairs. Advantages of these filters include their robustness to radiometric distortion and small amounts of random noise, and their amenability to hardware implementation. In this paper, a new matching algorithm is presented, which provides an overall framework for matching, and is used to compare the rank and census techniques with standard matching metrics. The algorithm was tested using both real stereo pairs and a synthetic pair with ground truth. The rank and census filters were shown to significantly improve performance in the case of radiometric distortion. In all cases, the results obtained were comparable to, if not better than, those obtained using standard matching metrics. Furthermore, the rank and census have the additional advantage that their computational overhead is less than these metrics. For all techniques tested, the difference between the results obtained for the synthetic stereo pair, and the ground truth results was small.

Entrenchment of GIS technology for enterprise solutions in Maryland's state and local government

Beginning in 1974, the State of Maryland created spatial databases under the MAGI (Maryland's Automated Geographic Information) system. Since that early GIS, other state and local agencies have begun GISs covering a range of applications from critical lands inventories to cadastral mapping. In 1992, state agencies, local agencies, universities, and businesses began a series of GIS coordination activities, resulting in the formation of the Maryland Local Geographic Information Committee and the Maryland State Government Geographic Information Coordinating Committee. GIS activities and system installations can be found in 22 counties plus Baltimore City, and most state agencies. Maryland's decision makers rely on a variety of GIS reports and products to conduct business and to communicate complex issues more effectively. This paper presents the status of Maryland's GIS applications for local and state decision making.

Understanding the participatory library through a grounded theory study

Lankes and Silverstein (2006) introduced the “participatory library” and suggested that the nature and form of the library should be explored. In the last several years, some attempts have been made in order to develop contemporary library models that are often known as Library 2.0. However, little research has been based on empirical data and such models have had a strong focus on technical aspects but less focus on participation. The research presented in this paper fills this gap. A grounded theory approach was adopted for this study. Six librarians were involved in in-depth individual interviews. As a preliminary result, five main factors of the participatory library emerged including technological, human, educational, social-economic, and environmental. Five factors influencing the participation in libraries were also identified: finance, technology, education, awareness, and policy. The study’s findings provide a fresh perspective on contemporary library and create a basis for further studies on this area.

Design and modeling of collaboration architecture for security

Threats against computer networks evolve very fast and require more and more complex measures. We argue that teams respectively groups with a common purpose for intrusion detection and prevention improve the measures against rapid propagating attacks similar to the concept of teams solving complex tasks known from field of work sociology. Collaboration in this sense is not easy task especially for heterarchical environments. We propose CIMD (collaborative intrusion and malware detection) as a security overlay framework to enable cooperative intrusion detection approaches. Objectives and associated interests are used to create detection groups for exchange of security-related data. In this work, we contribute a tree-oriented data model for device representation in the scope of security. We introduce an algorithm for the formation of detection groups, show realization strategies for the system and conduct vulnerability analysis. We evaluate the benefit of CIMD by simulation and probabilistic analysis.

CFD simulations of flow and heat transfer through the porous interface of a metal foam heat exchanger

This paper offers numerical modelling of a waste heat recovery system. A thin layer of metal foam is attached to a cold plate to absorb heat from hot gases leaving the system. The heat transferred from the exhaust gas is then transferred to a cold liquid flowing in a secondary loop. Two different foam PPI (Pores Per Inch) values are examined over a range of fluid velocities. Numerical results are then compared to both experimental data and theoretical results available in the literature. Challenges in getting the simulation results to match those of the experiments are addressed and discussed in detail. In particular, interface boundary conditions specified between a porous layer and a fluid layer are investigated. While physically one expects much lower fluid velocity in the pores compared to that of free flow, capturing this sharp gradient at the interface can add to the difficulties of numerical simulation. The existing models in the literature are modified by considering the pressure gradient inside and outside the foam. Comparisons against the numerical modelling are presented. Finally, based on experimentally-validated numerical results, thermo-hydraulic performance of foam heat exchangers as waste heat recovery units is discussed with the main goal of reducing the excess pressure drop and maximising the amount of heat that can be recovered from the hot gas stream.

3D CFD simulations of a candidate R143a radial-inflow turbine for geothermal power applications

Optimisation of Organic Rankine Cycles (ORCs) for binary cycle applications could play a major role in determining the competitiveness of low to moderate renewable sources. An important aspect of the optimisation is to maximise the turbine output power for a given resource. This requires careful attention to the turbine design notably through numerical simulations. Challenges in the numerical modelling of radial-inflow turbines using high-density working fluids still need to be addressed in order to improve the turbine design and better optimise ORCs. This paper presents preliminary 3D numerical simulations of a radial-inflow turbine working with high-density fluids in realistic geothermal ORCs. Following extensive investigation of the operating conditions and thermodynamic cycle analysis, the refrigerant R143a is chosen as the high-density working fluid. The 1D design of the candidate radial-inflow turbine is presented in details. Furthermore, commercially-available software Ansys-CFX is used to perform the 3D CFD simulations for a number of operating conditions including off-design conditions. The real-gas properties are obtained using the Peng-Robinson equations of state. The preliminary design created using dedicated radial-inflow turbine software Concepts-Rital is discussed and the 3D CFD results are presented and compared against the meanline analysis.

Cognitive behavioral interviewing for adult disorders : a practical handbook

This is a guidebook for clinicians on how to conduct assessment interviews with patients presenting with common psychological disorders. The orientation is behavioural and cognitive; so the book has wide applicability, as most clinicians explicitly or implicitly accept this combination of models as a useful basis for assessing and treating these problems. The problem areas covered are: fear and anxiety problems; depression, obesity; interpersonal problems; sexual dysfunction; insomnia; headache; and substance abuse.

Fitness and fatness in childhood obesity : implications of physical activity

Overweight and obesity are a significant cause of poor health worldwide, particularly in conjunction with low levels of physical activity (PA). PA is health-protective and essential for the physical growth and development of children, promoting physical and psychological health while simultaneously increasing the probability of remaining active as an adult. However, many obese children and adolescents have a unique set of physiological, biomechanical, and neuromuscular barriers to PA that they must overcome. It is essential to understand the influence of these barriers on an obese child's motivation in order to exercise and tailor exercise programs to the special needs of this population. Chapter Outline • Introduction • Defining Physical Activity, Exercise, and Physical Fitness • Physical Activity, Physical Fitness, And Motor Competence In Obese Children • Physical Activity and Obesity in Children • Physical Fitness in Obese Children • Balance and Gait in Obese Children • Motor Competence in Obese Children • Physical Activity Guidelines for Obese Children • Clinical Assessment of the Obese Child • Physical Activity Characteristics: Mode • Physical Activity Characteristics: Intensity • Physical Activity Characteristics: Frequency • Physical Activity Characteristics: Duration • Conclusion

Sit versus stand : can sitting be accurately identified using MTI accelerometer data?

High levels of sitting have been linked with poor health outcomes. Previously a pragmatic MTI accelerometer data cut-point (100 count/min-1) has been used to estimate sitting. Data on the accuracy of this cut-point is unavailable. PURPOSE: To ascertain whether the 100 count/min-1 cut-point accurately isolates sitting from standing activities. METHODS: Participants fitted with an MTI accelerometer were observed performing a range of sitting, standing, light & moderate activities. 1-min epoch MTI data were matched to observed activities, then re-categorized as either sitting or not using the 100 count/min-1 cut-point. Self-report demographics and current physical activity were collected. Generalized estimating equation for repeated measures with a binary logistic model analyses (GEE), corrected for age, gender and BMI, were conducted to ascertain the odds of the MTI data being misclassified. RESULTS: Data were from 26 healthy subjects (8 men; 50% aged <25 years; mean BMI (SD) 22.7(3.8)m/kg2). MTI sitting and standing data mode was 0 count/min-1, with 46% of sitting activities and 21% of standing activities recording 0 count/min-1. The GEE was unable to accurately isolate sitting from standing activities using the 100 count/min-1 cut-point, since all sitting activities were incorrectly predicted as standing (p=0.05). To further explore the sensitivity of MTI data to delineate sitting from standing, the upper 95% confidence interval of the mean for the sitting activities (46 count/min-1) was used to re-categorise the data; this resulted in the GEE correctly classifying 49% of sitting, and 69% of standing activities. Using the 100 count/min-1 cut-point the data were re-categorised into a combined ‘sit/stand’ category and tested against other light activities: 88% of sit/stand and 87% of light activities were accurately predicted. Using Freedson’s moderate cut-point of 1952 count/min-1 the GEE accurately predicted 97% of light vs. 90% of moderate activities. CONCLUSION: The distributions of MTI recorded sitting and standing data overlap considerably, as such the 100 count/min -1 cut-point did not accurately isolate sitting from other static standing activities. The 100 count/min -1 cut-point more accurately predicted sit/stand vs. other movement orientated activities.

A graphical notation for modelling events in business processes

Using complex event rules for capturing dependencies between business processes is an emerging trend in enterprise information systems. In previous work we have identified a set of requirements for event extensions for business process modeling languages. This paper introduces a graphical language for modeling composite events in business processes, namely BEMN, that fulfills all these requirements. These include event conjunction, disjunction and inhibition as well as cardinality of events whose graphical expression can be factored into flow-oriented process modeling and event rule modeling. Formal semantics for the language are provided.