Harmonisation of OH&S regulations

Policy instruments of education, regulation, fines and inspection have all been utilised by Australian jurisdictions as they attempt to improve the poor performance of occupational health and safety (OH&S) in the construction industry. However, such policy frameworks have been largely uncoordinated across Australia, resulting in differing policy systems, with differing requirements and compliance systems. Such complexity, particularly for construction firms operating across jurisdictional borders, led to various attempts to improve the consistency of OH&S regulation across Australia, four of which will be reviewed in this report. 1. The first is the Occupational Health and Safety Act 1991 (Commonwealth) which enabled certain organisations to opt out of state based regulatory regimes. 2. The second is the development of national standards, codes of practice and guidance documents by the National Occupational Health and Safety Council (NOHSC). The intent was that the OHS requirements, principles and practices contained in these documents would be adopted by state and territory governments into their legislation and policy, thereby promoting regulatory consistency across Australia. 3. The third is the attachment of conditions to special purpose payments from the Commonwealth to the States, in the form of OH&S accreditation with the Office of the Federal Safety Commissioner. 4. The fourth is the development of national voluntary codes of OHS practice for the construction industry. It is interesting to note that the tempo of change has increased significantly since 2003, with the release of the findings of the Cole Royal Commission. This paper examines and evaluates each of these attempts to promote consistency across Australia. It concludes that while there is a high level of information sharing between jurisdictions, particularly from the NOSHC standards, a fragmented OH&S policy framework still remains in place across Australia. The utility of emergent industry initiatives such as voluntary codes and guidelines for safer construction practices to enhance consistency are discussed.

Small firms and health and safety harmonisation : potential regulatory effects of a dominant narrative

Small firms are popularly viewed as resistant to complying with regulation. Harmonisation of Australia’s state-based work health and safety regimes is a significant regulatory change. In this article, we consider the likely responses of small firms to work health and safety harmonisation and argue that a range of choices are open to small firm owner-managers. These choices are shaped by individuals’ world views and are influenced by elements in the firms’ context. A significant element is the public narrative of work health and safety harmonisation, which can be understood by using discourse and sense-making concepts. Our analysis of small firm owner-manager choices takes into account small firms’ embeddedness in their regulatory context and the influence on organisational decision-making of the narrative of work health and safety harmonisation. The dominant narrative is arguably silent on the benefits of the work health and safety regulatory change and therefore the response of small firms is likely to be avoidance or minimalism. Non-compliance could be the result due to poor awareness of opportunities arising from this regulatory change.

Public good provision and the welfare effects of indirect tax harmonisation

The paper considers the welfare effect of the harmonisation of indirect taxes in two open economies. The revenue from taxation is used for the production of a non-tradeable public good. The welfare levels are affected via two channels: (i) changes in the levels of public good provision, and (ii) changes in deadweight loss associated with the taxes. We develop a number of rules of harmonisation and derive conditions under which they lead to potential Pareto improvement.

Streamlining local government : evaluating an eGovernment initiative in south east Queensland

Recent initiatives around the world have highlighted the potential for information and communications technology (ICT) to foster better service delivery for businesses. Likewise, ICT has also been applied to government services and is seen to result in improved service delivery, improved citizen participation in government, and enhanced cooperation across government departments and between government departments. The Council of Australian Governments (COAG) (2006) identified local government development assessment (DA) arrangements as a ‘hot spot’ needing specific attention, as the inconsistent policies and regulations between councils impeded regional economic activity. COAG (2006) specifically suggested that trials of various ICT mechanisms be initiated which may well be able to improve DA processes for local government. While the authors have explored various regulatory mechanisms to improve harmonisation elsewhere (Brown and Furneaux 2007), the possibility of ICT being able to enhance consistency across governments is a novel notion from a public policy perspective. Consequently, this paper will explore the utility of ICT initiatives to improve harmonisation of DA across local governments. This paper examines as a case study the recent attempt to streamline Development Assessment (DA) in local governments in South East Queensland. This initiative was funded by the Regulation Reduction Incentive Fund (RRIF), and championed by the South East Queensland (SEQ) Council of Mayors. The Regulation Reduction Incentive Fund (RRIF) program was created by the Australian government with the aim to provide incentives to local councils to reduce red tape for small and medium sized businesses. The funding for the program was facilitated through a competitive merit-based grants process targeted at Local Government Authorities. Grants were awarded to projects which targeted specific areas identified for reform (AusIndustry, 2007), in SEQ this focused around improving DA processes and creating transparency in environmental health policies, regulation and compliance. An important key factor to note with this case study is that it is unusual for an eGovernment initiative. Typically individual government departments undertake eGovernment projects in order to improve their internal performance. The RRIF case study examines the implementation of an eGovernment initiative across 21 autonomous local councils in South East Queensland. In order to move ahead, agreement needed to be reached between councils at the highest level. Having reviewed the concepts of eGovernment and eGovernance, the literature review is undertaken to identify the typical cost and benefits, barriers and enablers of ICT projects in government. The specific case of the RRIF project is then examined to determine if similar costs and benefits, barriers and enablers could be found in the RRIF project. The outcomes of the project, particularly in reducing red tape by increasing harmonisation between councils are explored.

Mapping the regulatory environment : implications for construction firms

As regulators, governments are often criticised for over‐regulating industries. This research project seeks to examine the regulation affecting the construction industry in a federal system of government. It uses a case study of the Australian system of government to focus on the question of the implications of regulation in the construction industry. Having established the extent of the regulatory environment, the research project considers the costs associated with this environment. Consequently, ways in which the regulatory burden on industry can be reduced are evaluated. The Construction Industry Business Environment project is working with industry and government agencies to improve regulatory harmonisation in Australia, and thereby reduce the regulatory burden on industry. It is found that while taxation and compliance costs are not likely to be reduced in the short term, costs arising from having to adapt to variation between regulatory regimes in a federal system of government, seem the most promising way of reducing regulatory costs. Identifying and reducing adaptive costs across jurisdictional are argued to present a novel approach to regulatory reform.

Performance Benchmarking of Australian Business Regulation : Submission to the Productivity Commission

The need to “reduce red tape” and regulatory inconsistencies is a desirable outcome (OECD 1997) for developed countries. The costs normally associated with regulatory regimes are compliance costs and direct charges. Geiger and Hoffman (1998) have noted that the extent of regulation in an industry tends to be negatively associated with firm performance. Typically, approaches to estimation of the cost of regulations examine direct costs, such as fees and charges, together with indirect costs, such as compliance costs. However, in a fragmented system, such as Australia, costs can also be incurred due to procedural delays, either by government, or by industry having to adapt documentation for different spheres of government; lack of predictable outcomes, with variations occurring between spheres of government and sometimes within the same government agency; and lost business opportunities, with delays and red tape preventing realisation of business opportunities (OECD 1997). In this submission these costs are termed adaptation costs. The adaptation costs of complying with variations in regulations between the states has been estimated by the Building Product Innovation Council (2003) as being up to $600 million per annum for building product manufacturers alone. Productivity gains from increased harmonisation of the regulatory system have been estimated in the hundreds of millions of dollars (ABCB 2003). This argument is supported by international research which found that increasing the harmonisation of legislation in a federal system of government reduces what we have termed adaptation costs (OECD 2001). Research reports into the construction industry in Australia have likewise argued that improved consistency in the regulatory environment could lead to improvements in innovation (PriceWaterhouseCoopers 2002), and that research into this area should be given high priority (Hampson & Brandon 2004). The opinion of industry in Australia has consistently held that the current regulatory environment inhibits innovation (Manley 2004). As a first step in advancing improvements to the current situation, a summary of the current costs experienced by industry needs to be articulated. This executive summary seeks to outline these costs in the hope that the Productivity Commission would be able to identify the best tools to quantify the actual costs to industry.

United States still no closer to database legislation

Last year European Intellectual Property Review published an article comparing the latest version of the proposed US database legislation, the Collections of Information Antipiracy Bill with the UK's Copyright and Rights in Database Regulations 1997. Subsequently a new US Bill, the Consumer and Investor Access to Information Act has emerged, the Antipiracy Bill has been amended and much debate has occurred, but the US seems no closer to enacting database legislation. This article briefly outlines the background to the US legislative efforts, examines the two Bills and draws some comparisons with the UK Regulations. A study of the US Bills clearly demonstrates the starkly divided opinion on database protection held by the Bills' proponents and the principal lobby groups driving the legislative efforts: the Antipiracy Bill is very protective of database producers' interests, whereas the Access Bill is heavily user-oriented. If the US experience is any indication there will be a long horizon involved in achieving any consensus on international harmonisation of this difficult area.

Combating computer crime : an international perspective

Given the serious nature of computer crime, and its global nature and implications, it is clear that there is a crucial need for a common understanding of such criminal activity internationally in order to deal with it effectively. Research into the extent to which legislation, international initiatives, and policy and procedures to combat and investigate computer crime are consistent globally is therefore of enormous importance. The challenge is to study, analyse, and compare the policies and practices of combating computer crime under different jurisdictions in order to identify the extent to which they are consistent with each other and with international guidelines; and the extent of their successes and limitations. The purpose ultimately is to identify areas where improvements are needed and what those improvements should be. This thesis examines approaches used for combating computer crime, including money laundering, in Australia, the UAE, the UK and the USA, four countries which represent a spectrum of economic development and culture. It does so in the context of the guidelines of international organizations such as the Council of Europe (CoE) and the Financial Action Task Force (FATF). In the case of the UAE, we examine also the cultural influences which differentiate it from the other three countries and which has necessarily been a factor in shaping its approaches for countering money laundering in particular. The thesis concludes that because of the transnational nature of computer crime there is a need internationally for further harmonisation of approaches for combating computer crime. The specific contributions of the thesis are as follows: „h Developing a new unified comprehensive taxonomy of computer crime based upon the dual characteristics of the role of the computer and the contextual nature of the crime „h Revealing differences in computer crime legislation in Australia, the UAE, the UK and the USA, and how they correspond to the CoE Convention on Cybercrime and identifying a new framework to develop harmonised computer crime or cybercrime legislation globally „h Identifying some important issues that continue to create problems for law enforcement agencies such as insufficient resources, coping internationally with computer crime legislation that differs between countries, having comprehensive documented procedures and guidelines for combating computer crime, and reporting and recording of computer crime offences as distinct from other forms of crime „h Completing the most comprehensive study currently available regarding the extent of money laundered in four such developed or fast developing countries „h Identifying that the UK and the USA are the most advanced with regard to anti-money laundering and combating the financing of terrorism (AML/CFT) systems among the four countries based on compliance with the FATF recommendations. In addition, the thesis has identified that local factors have affected how the UAE has implemented its financial and AML/CFT systems and reveals that such local and cultural factors should be taken into account when implementing or evaluating any country¡¦s AML/CFT system.

Using BIM for smarter and safer scaffolding and formwork construction: a preliminary methodology

The goal of this research project is to develop specific BIM objects for temporary construction activities which are fully integrated with object design, construction efficiency and safety parameters. Specifically, the project will deliver modularised electronic scaffolding and formwork objects that will allow designers to easily incorporate them into BIM models to facilitate smarter and safer infrastructure and building construction. This research first identified there is currently a distinct lack of BIM objects for temporary construction works resulting in productivity loss during design and construction, and opportunities for improved consideration of safety standards and practices with the design of scaffolding and formwork. This is particularly relevant in Australia, given the “harmonisation” of OHS legislation across all states and territories from 1 January 2012, meaning that enhancements to Queensland practices will have direct application across Australia. Thus, in conjunction with government and industry partners in Queensland, Australia, the research team developed a strategic three-phase research methodology: (1) the preliminary review phase on industrial scaffolding and formwork practices and BIM implementation; (2) the BIM object development phase with specific safety and productivity functions; and (3) the Queensland-wide workshop phase for product dissemination and training. This paper discusses background review findings, details of the developed methodology, and expected research outcomes and their contributions to the Australian construction industry.

Rail incident investigator training: Is there support for a standardised Australasian training framework?

Background: Historically rail organisations have been operating in silos and devising their own training agendas. However with the harmonisation of the Australian workplace health and safety legislation and the appointment of a national rail safety regulator in 2013, rail incident investigator experts are exploring the possibility of developing a unified approach to investigator training. Objectives: The Australian CRC for Rail Innovation commissioned a training needs analysis to identify if common training needs existed between organisations and to assess support for the development of a national competency framework for rail incident investigations. Method: Fifty-two industry experts were consulted to explore the possibility of the development of a standardised training framework. These experts were sourced from within 19 Australasian organisations, comprising Rail Operators and Regulators in Queensland, New South Wales, Victoria, Western Australia, South Australia and New Zealand. Results: Although some competency requirements appear to be organisation specific, the vast majority of reported training requirements were generic across the Australasian rail operators and regulators. Industry experts consistently reported strong support for the development of a national training framework. Significance: The identification of both generic training requirements across organisations and strong support for standardised training indicates that the rail industry is receptive to the development of a structured training framework. The development of an Australasian learning framework could: increase efficiency in course development and reduce costs; establish recognised career pathways; and facilitate consistency with regards to investigator training.

Law, ethics and pandemic preparedness : the importance of cross-jurisdictional and cross-cultural perspectives

OBJECTIVE To explore social equity, health planning, regulatory and ethical dilemmas in responding to a pandemic influenza (H5N1) outbreak, and the adequacy of protocols and standards such as the International Health Regulations (2005). APPROACH This paper analyses the role of legal and ethical considerations for pandemic preparedness, including an exploration of the relevance of cross-jurisdictional and cross-cultural perspectives in assessing the validity of goals for harmonisation of laws and policies both within and between nations. Australian and international experience is reviewed in various areas, including distribution of vaccines during a pandemic, the distribution of authority between national and local levels of government, and global and regional equity issues for poorer countries. CONCLUSION This paper finds that questions such as those of distributional justice (resource allocation) and regulatory frameworks raise important issues about the cultural and ethical acceptability of planning measures. Serious doubt is cast on a 'one size fits all' approach to international planning for managing a pandemic. It is concluded that a more nuanced approach than that contained in international guidelines may be required if an effective response is to be constructed internationally. IMPLICATIONS The paper commends the wisdom of reliance on 'soft law', international guidance that leaves plenty of room for each nation to construct its response in conformity with its own cultural and value requirements.

Law, ethics and pandemic preparedness : the importance of cross-jurisdictional and cross-cultural perspectives

Objective To explore social equity, health planning, regulatory and ethical dilemmas in responding to a pandemic influenza (H5N1) outbreak, and the adequacy of protocols and standards such as the International Health Regulations (2005). Approach This paper analyses the role of legal and ethical considerations for pandemic preparedness, including an exploration of the relevance of cross-jurisdictional and cross-cultural perspectives in assessing the validity of goals for harmonisation of laws and policies both within and between nations. Australian and international experience is reviewed in various areas, including distribution of vaccines during a pandemic, the distribution of authority between national and local levels of government, and global and regional equity issues for poorer countries. Conclusion This paper finds that questions such as those of distributional justice (resource allocation) and regulatory frameworks raise important issues about the cultural and ethical acceptability of planning measures. Serious doubt is cast on a ‘one size fits all’ approach to international planning for managing a pandemic. It is concluded that a more nuanced approach than that contained in international guidelines may be required if an effective response is to be constructed internationally. Implications The paper commends the wisdom of reliance on ‘soft law’, international guidance that leaves plenty of room for each nation to construct its response in conformity with its own cultural and value requirements.

Regulating small things : genes, gametes and nanotechnology

Biotechnology and nanotechnology both intersect with other technologies in ways that open new possibilities for further technological progress. The potential for increased convergence between technological fields highlights the need for regulatory frameworks to be integrated, flexible and responsive. Within a federal legal system such as Australia’s, there is a need to ensure that we adopt a coordinated national approach to the crafting of regulatory solutions. In addition, there is a need for global cooperation in the development of international standards and regulatory harmonisation. Finally, this article considers the role that law plays in negotiating risk in relation to new technologies.

The impacts of variable speed limit on speed variation and headway distribution

This thesis investigates the impacts of variable speed limit on motorway speed variation and headway distribution. Initiative techniques of traffic flow categorisation study contribute in analysing the effects of variable speed limit on various traffic states. The project focuses on the speed harmonisation impacts within and across lanes as well as the uniformity of headway spread in the application of variable speed limit.