Removing barriers to protection at the exported border : visas, carrier sanctions, and international obligation

Asylum is being gradually denuded of the national institutional mechanisms (judicial, legislative and administrative) that provide the framework for a fair and effective asylum hearing. In this sense, there is an ongoing ‘denationalization’ or ‘deformalization’ of the asylum process. This chapter critically examines one of the linchpins of this trend: the erection of pre-entry measures at ports of embarkation in order to prevent asylum seekers from physically accessing the territory of the state. Pre-entry measures comprise the core requirement that foreigners possess an entry visa granting permission to enter the state of destination. Visa requirements are increasingly implemented by immigration officials posted abroad or by officials of transit countries pursuant to bilateral agreements (so-called ‘juxtaposed’ immigration controls). Private carriers, which are subject to sanctions if they bring persons to a country who do not have permission to enter, also engage in a form of de facto immigration control on behalf of states. These measures constitute a type of ‘externalized’ or ‘exported’ border that pushes the immigration boundaries of the state as far from its physical boundaries as possible. Pre-entry measures have a crippling impact on the ability of asylum seekers to access the territory of states to claim asylum. In effect, states have ‘externalized’ asylum by replacing the legal obligation on states to protect refugees arriving at ports of entry with what are perceived to be no more than moral obligations towards asylum seekers arriving at the external border of the state.

Virtual design process : design validation tool schematic approach in car carrier

An important aspect of designing any product is validation. Virtual design process (VDP) is an alternative to hardware prototyping in which analysis of designs can be done without manufacturing physical samples. In recent years, VDP have been generated either for animation or filming applications. This paper proposes a virtual reality design process model on one of the applications when used as a validation tool. This technique is used to generate a complete design guideline and validation tool of product design. To support the design process of a product, a virtual environment and VDP method were developed that supports validation and an initial design cycle performed by a designer. The product model car carrier is used as illustration for which virtual design was generated. The loading and unloading sequence of the model for the prototype was generated using automated reasoning techniques and was completed by interactively animating the product in the virtual environment before complete design was built. By using the VDP process critical issues like loading, unloading, Australian Design rules (ADR) and clearance analysis were done. The process would save time, money in physical sampling and to large extent in complete math generation. Since only schematic models are required, it saves time in math modelling and handling of bigger size assemblies due to complexity of the models. This extension of VDP process for design evaluation is unique and was developed, implemented successfully. In this paper a Toll logistics and J Smith and Sons car carrier which is developed under author’s responsibility has been used to illustrate our approach of generating design validation via VDP.

Speeding in Australia and China : a comparison of the influence of legal sanctions and enforcement practices on car drivers

Despite increasingly sophisticated speed management strategies, speeding remains a significant contributing factor in 25% of Australia’s fatal crashes. Excessive speed is also a recognised contributor to road trauma in rapidly motorising countries such as China, where increases in vehicle ownership and new drivers, and a high proportion of vulnerable road users all contribute to a high road trauma rate. Speed choice is a voluntary behaviour. Therefore, driver perceptions are important to our understanding of the nature of speeding. This paper reports preliminary qualitative (focus groups) and quantitative (survey) investigations of the perceptions of drivers in Queensland and Beijing. Drivers’ definitions of speeding as well as their perceptions of the influence of legal factors on their reported speeds were explored. Survey participants were recruited from petrol stations (Queensland, n=833) and car washes (Beijing, n=299). Similarities were evident in justifications for exceeding speed limits across samples. Excessive speeds were not deemed as ‘speeding’ when drivers considered that they were safe and under their control, or when speed limits were seen as unreasonably low. This appears linked to perceptions of enforcement tolerances in some instances with higher perceived enforcement thresholds noted in China. Encouragingly, drivers in both countries reported a high perceived risk of apprehension if speeding. However, a substantial proportion of both samples also indicated perceptions of low certainty of receiving penalties when apprehended. Chinese drivers considered sanctions less severe than did Australian drivers. In addition, strategies to avoid detection and penalties were evident in both samples, with Chinese drivers reporting a broader range of avoidant techniques. Implications of the findings for future directions in speed management in both countries are discussed.

Three Carrier Ambiguity Resolutions : Generalised problems, models and solutions

In this paper, the problems of three carrier phase ambiguity resolution (TCAR) and position estimation (PE) are generalized as real time GNSS data processing problems for a continuously observing network on large scale. In order to describe these problems, a general linear equation system is presented to uniform various geometry-free, geometry-based and geometry-constrained TCAR models, along with state transition questions between observation times. With this general formulation, generalized TCAR solutions are given to cover different real time GNSS data processing scenarios, and various simplified integer solutions, such as geometry-free rounding and geometry-based LAMBDA solutions with single and multiple-epoch measurements. In fact, various ambiguity resolution (AR) solutions differ in the floating ambiguity estimation and integer ambiguity search processes, but their theoretical equivalence remains under the same observational systems models and statistical assumptions. TCAR performance benefits as outlined from the data analyses in some recent literatures are reviewed, showing profound implications for the future GNSS development from both technology and application perspectives.

Novel car carrier design : prevention of falls from heights

This article reports the details of a research on novel design in the field of semitrailer sector and discuss design by hazard prevention techniques. The novel design made addresses occupational health and safety (OHS)concerns of fall from heights. The research includes a detailed survey of national data sources to examine the fatalities caused due to fall from heights in car carriers. The study investigates OHS recommendations in Australia for semitrailer sector. Often injuries are caused due to drivers working above the 1.5 meter height for loading, unloading of the cars, moving the decks up, down, strapping the cars, and slipperly. The new design is developed using latest computer aided design and engineeing (CAD, CAE), product data management (PDM), virtual design process (VDP). The new car carrier design excels in reducing the risks of injuries to drivers and new bench mark for OHS standards. The new design has all the decks operated with hydraulics and uses unique ratchet lock mechanism (fool proof design) and loading happens at a safe working height (below 1.5 meter). All the cars are strapped on the safe working height, and then car desks operated hydraulically to transfer them to the required position. This also includes the car on the prime mover, which shuttles across from one deck to other using hydraulic and rack-pinion mechanisms. The novel design car carrier solves the problem of falls from height: next step would be to transfer this technology across other similar effected sectors.

Impaired drivers : The need to yoke treatment and sanctions

Objective: To understand the levels of substance abuse and dependence among impaired drivers by comparing the differences in patients in substance abuse treatment programs with and without a past-year DUI arrest based on their primary problem substance at admission (alcohol, cocaine, cannabis, or methamphetamine). Method: Records on 345,067 admissions to Texas treatment programs between 2005 and 2008 have been analyzed for differences in demographic characteristics, levels of severity, and mental health problems at admission, treatment completion, and 90-day follow-up. Methods will include t-tests,??, and multivariate logistic regression. Results: The analysis found that DUI arrestees with a primary problem with alcohol were less impaired than non-DUI alcohol patients, had fewer mental health problems, and were more likely to complete treatment. DUI arrestees with a primary problem with cannabis were more impaired than non-DUI cannabis patients and there was no difference in treatment completion. DUI arrestees with a primary problem with cocaine were less impaired and more likely to complete treatment than other cocaine patients, and there was little difference in levels of mental health problems. DUI arrestees with a primary problem with methamphetamine were more similar to methamphetamine non-arrestees, with no difference in mental health problems and treatment completion. Conclusions: This study provides evidence of the extent of abuse and dependence among DUI arrestees and their need for treatment for their alcohol and drug problems in order to decrease recidivism. Treatment patients with past-year DUI arrests had good treatment outcomes but closer supervision during 90 day follow-up after treatment can lead to even better long-term outcomes, including reduced recidivism. Information will be provided on the latest treatment methodologies, including medication assisted therapies and screening and brief interventions, and ways impaired driving programs and substance dependence programs can be integrated to benefit the driver and society.

Beyond sanctions : is there a need to treat first-time offenders?

Aims: Driving Under the Influence (DUI) enforcement can be a broad screening mechanism for alcohol and other drug problems. The current response to DUI is focused on using mechanical means to prevent inebriated persons from driving, with little attention the underlying substance abuse problems. ---------- Methods: This is a secondary analysis of an administrative dataset of over 345,000 individuals who entered Texas substance abuse treatment between 2005 and 2008. Of these, 36,372 were either on DUI probation, referred to treatment by probation, or had a DUI arrest in the past year. The DUI offenders were compared on demographic characteristics, substance use patterns, and levels of impairment with those who were not DUI offenders and first DUI offenders were compared with those with more than one past-year offense. T tests and chi square tests were used to determine significance. ---------- Results: DUI offenders were more likely to be employed, to have a problem with alcohol, to report more past-year arrests for any offense, to be older, and to have used alcohol and drugs longer than the non-DUI clients who reported higher ASI scores and were more likely to use daily. Those with one past-year DUI arrest were more likely to have problems with drugs other than alcohol and were less impaired than those with two or more arrests based on their ASI scores and daily use. Non-DUI clients reported higher levels of mood disorders than DUIs but there was no difference in their diagnosis of anxiety. Similar findings were found between those with one or multiple DUI arrests. ----------Conclusion: Although first-time DUIs were not as impaired as non-DUI clients, their levels of impairment were sufficient to cause treatment. Screening and brief intervention at arrest for all DUI offenders and treatment in combination with abstinence monitoring could decrease future recidivism.

Computed success rates of various carrier phase integer estimation solutions and their comparison with statistical success rates

The success rate of carrier phase ambiguity resolution (AR) is the probability that the ambiguities are successfully fixed to their correct integer values. In existing works, an exact success rate formula for integer bootstrapping estimator has been used as a sharp lower bound for the integer least squares (ILS) success rate. Rigorous computation of success rate for the more general ILS solutions has been considered difficult, because of complexity of the ILS ambiguity pull-in region and computational load of the integration of the multivariate probability density function. Contributions of this work are twofold. First, the pull-in region mathematically expressed as the vertices of a polyhedron is represented by a multi-dimensional grid, at which the cumulative probability can be integrated with the multivariate normal cumulative density function (mvncdf) available in Matlab. The bivariate case is studied where the pull-region is usually defined as a hexagon and the probability is easily obtained using mvncdf at all the grid points within the convex polygon. Second, the paper compares the computed integer rounding and integer bootstrapping success rates, lower and upper bounds of the ILS success rates to the actual ILS AR success rates obtained from a 24 h GPS data set for a 21 km baseline. The results demonstrate that the upper bound probability of the ILS AR probability given in the existing literatures agrees with the actual ILS success rate well, although the success rate computed with integer bootstrapping method is a quite sharp approximation to the actual ILS success rate. The results also show that variations or uncertainty of the unit–weight variance estimates from epoch to epoch will affect the computed success rates from different methods significantly, thus deserving more attentions in order to obtain useful success probability predictions.

Effects of magnesium stearate on the efficient dispersion of salbutamol sulphate from carrier-based dry powder inhaler formulations

Dry powder inhaler (DPI) formulations is one of the most useful aerosol preparations in which drugs may be formulated as carrier-based interactive mixtures with micronised drug particles (<5 μm) adhered onto the surface of large inert carriers (lactose powders). The addition of magnesium stearate (MgSt) (1-3), was found to increase dispersion of various drugs from DPI formulations. Recently, some active compounds coated with 5% (wt/wt) MgSt using the mechanofusion method showed significant improvements in aerosolization behavior due to the reduction in intrinsic cohesion force (4). Application of MgSt in powder formulations is not new; however, no studies demonstrated the minimum threshold level for this excipient in efficient aerosolization of drug powders from the interactive mixtures. Therefore, this study investigated the role of MgSt concentration on the efficient dispersion of salbutamol sulphate (SS) from DPI formulations.

Natural balancing of flying capacitor voltages in multicell inverter under PD carrier-based PWM

The flying capacitor multicell inverter (FCMI) possesses natural balancing property. With the phase-shifted (PS) carrier-based scheme, natural balancing can be achieved in a straightforward manner. However, to achieve natural balancing with the harmonically optimal phase-disposition (PD) carrierbased scheme, the conventional approaches require (n-1) x (n-1) trapezoidal carrier signals for an n-level inverter, which is (n-1) x (n-2) times more than that in the standard PD scheme. This paper proposes two improved natural balancing strategies for FMI under PD scheme, which use the same (n-1) carrier signals as used in the standard PD scheme. In the first scheme, on-line detection is performed of the band in which the modulation signal is located, corresponding period number of the carrier, and rising or falling half cycle of the carrier waveform to generate the switching signals based on certain rules. In the second strategy, the output voltage level selection is first processed and the switching signals are then generated according to a rule based on preferential cell selection algorithm. These methods are easy to use and can be simply implemented as compared to the other available methods. Simulation and experimental results are presented for a five-level inverter to verify these proposed schemes.

Three carrier ambiguity resolution : distance-independent performance demonstrated using semi-generated triple frequency GPS signals

In spite of significant research in the development of efficient algorithms for three carrier ambiguity resolution, full performance potential of the additional frequency signals cannot be demonstrated effectively without actual triple frequency data. In addition, all the proposed algorithms showed their difficulties in reliable resolution of the medium-lane and narrow-lane ambiguities in different long-range scenarios. In this contribution, we will investigate the effects of various distance-dependent biases, identifying the tropospheric delay to be the key limitation for long-range three carrier ambiguity resolution. In order to achieve reliable ambiguity resolution in regional networks with the inter-station distances of hundreds of kilometers, a new geometry-free and ionosphere-free model is proposed to fix the integer ambiguities of the medium-lane or narrow-lane observables over just several minutes without distance constraint. Finally, the semi-simulation method is introduced to generate the third frequency signals from dual-frequency GPS data and experimentally demonstrate the research findings of this paper.