An investigation into the use of a blended model of learning in a first year accounting subject

The weaknesses of ‗traditional‘ modes of instruction in accounting education have been widely discussed. Many contend that the traditional approach limits the ability to provide opportunities for students to raise their competency level and allow them to apply knowledge and skills in professional problem solving situations. However, the recent body of literature suggests that accounting educators are indeed actively experimenting with ‗non-traditional‘ and ‗innovative‘ instructional approaches, where some authors clearly favour one approach over another. But can one instructional approach alone meet the necessary conditions for different learning objectives? Taking into account the ever changing landscape of not only business environments, but also the higher education sector, the premise guiding the collaborators in this research is that it is perhaps counter productive to promote competing dichotomous views of ‗traditional‘ and ‗non-traditional‘ instructional approaches to accounting education, and that the notion of ‗blended learning‘ might provide a useful framework to enhance the learning and teaching of accounting. This paper reports on the first cycle of a longitudinal study, which explores the possibility of using blended learning in first year accounting at one campus of a large regional university. The critical elements of blended learning which emerged in the study are discussed and, consistent with the design-based research framework, the paper also identifies key design modifications for successive cycles of the research.

Students’ perceptions of a blended web-based learning environment

The enhanced accessibility, affordability and capability of the Internet has created enormous possibilities in terms of designing, developing and implementing innovative teaching methods in the classroom. As existing pedagogies are revamped and new ones are added, there is a need to assess the effectiveness of these approaches from the students’ perspective. For more than three decades, proven qualitative and quantitative research methods associated with learning environments research have yielded productive results for educators. This article presents the findings of a study in which Getsmart, a teacher-designed website, was blended into science and physics lessons at an Australian high school. Students’ perceptions of this environment were investigated, together with differences in the perceptions of students in junior and senior years of schooling. The article also explores the impact of teachers in such an environment. The investigation undertaken in this study also gave an indication of how effective Getsmart was as a teaching model in such environments.

Virtual reality or virtually real : blended teaching and learning in a Master's level research methods class

This paper examines the enabling effect of using blended learning and synchronous internet mediated communication technologies to improve learning and develop a Sense of Community (SOC) in a group of post-graduate students consisting of a mix of on-campus and off-campus students. Both quantitative and qualitative data collected over a number of years supports the assertion that the blended learning environment enhanced both teaching and learning. The development of a SOC was pivotal to the success of the blended approach when working with geographically isolated groups within a single learning environment.

An efficient approach for the direct synthesis of lithium niobate powders

Lithium niobate powders from the raw powders of Li2 O5 are directly synthesized by a combustion method with urea fuel. The synthesis parameters (e.g. the calcination temperature, calcination time, and urea-to-(Li2 CO3 + Nb2 O5) quantity ratio) are studied to reveal the optimized synthesis conditions for preparing high-quality lithium niobate powders. In our present work, it is found that a urea-to-(Li2 CO3 + Nb2 O5) ratio close to 3, calcination temperature at 550-600 degrees and reaction time around 2.5h may lead to high-quality lithium niobate powsers. The microstructure of synthesized powders is further studied; a possible mechanism of the involved reactions is also proposed.

Properties of lignin and poly(hydroxybutyrate) blends

The Queensland University of Technology (QUT) allows the presentation of a thesis for the Degree of Doctor of Philosophy in the format of published or submitted papers, where such papers have been published, accepted or submitted during the period of candidature. This thesis is composed of Seven published/submitted papers and one poster presentation, of which five have been published and the other two are under review. This project is financially supported by the QUTPRA Grant. The twenty-first century started with the resurrection of lignocellulosic biomass as a potential substitute for petrochemicals. Petrochemicals, which enjoyed the sustainable economic growth during the past century, have begun to reach or have reached their peak. The world energy situation is complicated by political uncertainty and by the environmental impact associated with petrochemical import and usage. In particular, greenhouse gasses and toxic emissions produced by petrochemicals have been implicated as a significant cause of climate changes. Lignocellulosic biomass (e.g. sugarcane biomass and bagasse), which potentially enjoys a more abundant, widely distributed, and cost-effective resource base, can play an indispensible role in the paradigm transition from fossil-based to carbohydrate-based economy. Poly(3-hydroxybutyrate), PHB has attracted much commercial interest as a plastic and biodegradable material because some its physical properties are similar to those of polypropylene (PP), even though the two polymers have quite different chemical structures. PHB exhibits a high degree of crystallinity, has a high melting point of approximately 180°C, and most importantly, unlike PP, PHB is rapidly biodegradable. Two major factors which currently inhibit the widespread use of PHB are its high cost and poor mechanical properties. The production costs of PHB are significantly higher than for plastics produced from petrochemical resources (e.g. PP costs $US1 kg-1, whereas PHB costs $US8 kg-1), and its stiff and brittle nature makes processing difficult and impedes its ability to handle high impact. Lignin, together with cellulose and hemicellulose, are the three main components of every lignocellulosic biomass. It is a natural polymer occurring in the plant cell wall. Lignin, after cellulose, is the most abundant polymer in nature. It is extracted mainly as a by-product in the pulp and paper industry. Although, traditionally lignin is burnt in industry for energy, it has a lot of value-add properties. Lignin, which to date has not been exploited, is an amorphous polymer with hydrophobic behaviour. These make it a good candidate for blending with PHB and technically, blending can be a viable solution for price and reduction and enhance production properties. Theoretically, lignin and PHB affect the physiochemical properties of each other when they become miscible in a composite. A comprehensive study on structural, thermal, rheological and environmental properties of lignin/PHB blends together with neat lignin and PHB is the targeted scope of this thesis. An introduction to this research, including a description of the research problem, a literature review and an account of the research progress linking the research papers is presented in Chapter 1. In this research, lignin was obtained from bagasse through extraction with sodium hydroxide. A novel two-step pH precipitation procedure was used to recover soda lignin with the purity of 96.3 wt% from the black liquor (i.e. the spent sodium hydroxide solution). The precipitation process is presented in Chapter 2. A sequential solvent extraction process was used to fractionate the soda lignin into three fractions. These fractions, together with the soda lignin, were characterised to determine elemental composition, purity, carbohydrate content, molecular weight, and functional group content. The thermal properties of the lignins were also determined. The results are presented and discussed in Chapter 2. On the basis of the type and quantity of functional groups, attempts were made to identify potential applications for each of the individual lignins. As an addendum to the general section on the development of composite materials of lignin, which includes Chapters 1 and 2, studies on the kinetics of bagasse thermal degradation are presented in Appendix 1. The work showed that distinct stages of mass losses depend on residual sucrose. As the development of value-added products from lignin will improve the economics of cellulosic ethanol, a review on lignin applications, which included lignin/PHB composites, is presented in Appendix 2. Chapters 3, 4 and 5 are dedicated to investigations of the properties of soda lignin/PHB composites. Chapter 3 reports on the thermal stability and miscibility of the blends. Although the addition of soda lignin shifts the onset of PHB decomposition to lower temperatures, the lignin/PHB blends are thermally more stable over a wider temperature range. The results from the thermal study also indicated that blends containing up to 40 wt% soda lignin were miscible. The Tg data for these blends fitted nicely to the Gordon-Taylor and Kwei models. Fourier transform infrared spectroscopy (FT-IR) evaluation showed that the miscibility of the blends was because of specific hydrogen bonding (and similar interactions) between reactive phenolic hydroxyl groups of lignin and the carbonyl group of PHB. The thermophysical and rheological properties of soda lignin/PHB blends are presented in Chapter 4. In this chapter, the kinetics of thermal degradation of the blends is studied using thermogravimetric analysis (TGA). This preliminary investigation is limited to the processing temperature of blend manufacturing. Of significance in the study, is the drop in the apparent energy of activation, Ea from 112 kJmol-1 for pure PHB to half that value for blends. This means that the addition of lignin to PHB reduces the thermal stability of PHB, and that the comparative reduced weight loss observed in the TGA data is associated with the slower rate of lignin degradation in the composite. The Tg of PHB, as well as its melting temperature, melting enthalpy, crystallinity and melting point decrease with increase in lignin content. Results from the rheological investigation showed that at low lignin content (.30 wt%), lignin acts as a plasticiser for PHB, while at high lignin content it acts as a filler. Chapter 5 is dedicated to the environmental study of soda lignin/PHB blends. The biodegradability of lignin/PHB blends is compared to that of PHB using the standard soil burial test. To obtain acceptable biodegradation data, samples were buried for 12 months under controlled conditions. Gravimetric analysis, TGA, optical microscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), FT-IR, and X-ray photoelectron spectroscopy (XPS) were used in the study. The results clearly demonstrated that lignin retards the biodegradation of PHB, and that the miscible blends were more resistant to degradation compared to the immiscible blends. To obtain an understanding between the structure of lignin and the properties of the blends, a methanol-soluble lignin, which contains 3× less phenolic hydroxyl group that its parent soda lignin used in preparing blends for the work reported in Chapters 3 and 4, was blended with PHB and the properties of the blends investigated. The results are reported in Chapter 6. At up to 40 wt% methanolsoluble lignin, the experimental data fitted the Gordon-Taylor and Kwei models, similar to the results obtained soda lignin-based blends. However, the values obtained for the interactive parameters for the methanol-soluble lignin blends were slightly lower than the blends obtained with soda lignin indicating weaker association between methanol-soluble lignin and PHB. FT-IR data confirmed that hydrogen bonding is the main interactive force between the reactive functional groups of lignin and the carbonyl group of PHB. In summary, the structural differences existing between the two lignins did not manifest itself in the properties of their blends.

Facilitating student self-direction in a blended learning environment

Business postgraduate education is rapidly adopting virtual learning environments to facilitate the needs of a time-poor stakeholder community, where part-time students find it difficult to attend face-to-face classes. Creating engaged, flexible learning opportunities in the virtual world is therefore the current challenge for many business academics. However, in the blended learning environment there is also the added pressure of encouraging these students to develop soft managerial or generic skills such as self-reflection. The current paper provides an overview of an action-research activity exploring the experiences of students who were required to acquire the skills of self-reflection within a blended learning unit dominated by on-line learning delivery. We present the responses of students and the changes made to our teaching and learning activities to improve the facilitation of both our face-to-face delivery as well as the on-line learning environment.

Dichotomy in the design studio : adapting to new blended learning environments

In a study aimed at better understanding how staff and students adapt to new blended studio learning environments (BSLE’s), a group of 165 second year architecture students at a large school of architecture in Australia were separated into two different design studio learning environments. 70% of students were allocated to a traditional studio design learning environment (TSLE) and 30% to a new, high technology embedded, prototype digital learning laboratory. The digital learning laboratory was purpose designed for the case-study users, adapted Student-Centred Active Learning Environment for Undergraduate Programs (SCALE-UP) principles, and built as part of a larger university research project. The architecture students attended the same lectures, followed the same studio curriculum and completed the same pieces of assessment; the only major differences were the teaching staff and physical environment within which the studios were conducted. At the end of the semester, the staff and students were asked to complete a questionnaire about their experiences and preferences within the two respective learning environments. Following this, participants were invited to participate in focus groups, where a synergistic approach was effected. Using a dual method qualitative approach, the questionnaire and survey data were coded and extrapolated using both thematic analysis and grounded theory methodology. The results from these two different approaches were compared, contrasted and finally merged, to reveal six distinct emerging themes, which were instrumental in offering resistance or influencing adaptation to, the new BLSE. This paper reports on the study, discusses the major contributors to negative resistance and proposes points for consideration, when transitioning from a TSLE to a BLSE.

Good Practice Report : Blended Learning

In early 2011, the Australian Learning and Teaching Council Ltd (ALTC) commissioned a series of Good Practice Reports on completed ALTC projects and fellowships. This report will: • Provide a summative evaluation of the good practices and key outcomes for teaching and learning from completed ALTC projects and fellowships relating to blended learning • Include a literature review of the good practices and key outcomes for teaching and learning from national and international research • Identify areas in which further work or development are appropriate. The literature abounds with definitions; it can be argued that the various definitions incorporate different perspectives, but there is no single, collectively accepted definition. Blended learning courses in higher education can be placed somewhere on a continuum, between fully online and fully face-to-face courses. Consideration must therefore be given to the different definitions for blended learning presented in the literature and by users and stakeholders. The application of this term in these various projects and fellowships is dependent on the particular focus of the team and the conditions and situations under investigation. One of the key challenges for projects wishing to develop good practice in blended learning is the lack of a universally accepted definition. The findings from these projects and fellowships reveal the potential of blended learning programs to improve both student outcomes and levels of satisfaction. It is clear that this environment can help teaching and learning engage students more effectively and allow greater participation than traditional models. Just as there are many definitions, there are many models and frameworks that can be successfully applied to the design and implementation of such courses. Each academic discipline has different learning objectives and in consequence there can’t be only one correct approach. This is illustrated by the diversity of definitions and applications in the ALTC funded projects and fellowships. A review of the literature found no universally accepted guidelines for good practice in higher education. To inform this evaluation and literature review, the Seven Principles for Good Practice in Undergraduate Education, as outlined by Chickering and Gamson (1987), were adopted: 1. encourages contacts between students and faculty 2. develops reciprocity and cooperation among students 3. uses active learning techniques 4. gives prompt feedback 5. emphasises time on task 6. communicates high expectations 7. respects diverse talents and ways of learning. These blended learning projects have produced a wide range of resources that can be used in many and varied settings. These resources include: books, DVDs, online repositories, pedagogical frameworks, teaching modules. In addition there is valuable information contained in the published research data and literature reviews that inform good practice and can assist in the development of courses that can enrich and improve teaching and learning.

ICT for blended learning Queensland University of Technology, Australia

This report focuses on blended learning within the Queensland University of Technology (QUT) which is one of Australia’s largest public universities. Although the university in its current format was established in 1989, it contains several previous institutions that can be traced to the earliest forms of technical and teacher education in Queensland in the 19th century (Kyle et al., 1999). The focal point of the report is the experience of QUT’s Faculty of Education which was formed from the amalgamation of several teacher training colleges servicing pre-school and kindergarten, primary and secondary teacher education. While the broader university currently employs approximately 4,000 staff and has about 40,000 students, QUT’s Faculty of Education employs around 170 staff and has approximately 5,000 enrolled students. The Faculty of Education at QUT is the largest provider of pre-service teacher education in Australia and is one of the largest producers of educational research. A major theme of the Faculty of Education is its focus on education and research that provides teachers, schools and educational authorities with practical solutions to the multifaceted issues facing contemporary education.

Photocatalytic disinfection of bacterial pollutants using suspended and immobilized TiO(2) powders

The photocatalytic disinfection of Enterobacter cloacae and Enterobacter coli using microwave (MW), convection hydrothermal (HT) and Degussa P25 titania was investigated in suspension and immobilized reactors. In suspension reactors, MW-treated TiO(2) was the most efficient catalyst (per unit weight of catalyst) for the disinfection of E. cloacae. However, HT-treated TiO(2) was approximately 10 times more efficient than MW or P25 titania for the disinfection of E. coli suspensions in surface water using the immobilized reactor. In immobilized experiments, using surface water a significant amount of photolysis was observed using the MW- and HT-treated films; however, disinfection on P25 films was primarily attributed to photocatalysis. Competitive action of inorganic ions and humic substances for hydroxyl radicals during photocatalytic experiments, as well as humic substances physically screening the cells from UV and hydroxyl radical attack resulted in low rates of disinfection. A decrease in colony size (from 1.5 to 0.3 mm) was noted during photocatalytic experiments. The smaller than average colonies were thought to occur during sublethal (•) OH and O(2) (•-) attack. Catalyst fouling was observed following experiments in surface water and the ability to regenerate the surface was demonstrated using photocatalytic degradation of oxalic acid as a model test system