Similarity not favourability : the role of donor prototypes in predicting willingness to donate organs while living

Using an extended Prototype/Willingness Model, we examined the predictors of willingness to donate an organ to a partner/family member and a stranger while living. A questionnaire assessed university students’ (N = 284) attitudes, subjective norm, prototype favourability, prototype similarity, moral norm, and willingness to donate organs in each recipient scenario. All variables, except prototype favourability, predicted willingness to donate organs in both situations. Future strategies should emphasise perceived approval from important others for living donation, the consistency of living donation with one’s own morals, and encourage perceptions of similarity between oneself and living donors to increase acceptance of living donation.

Raman spectroscopic study of the mineral finnemanite Pb5(As3+O3)3Cl

The arsenite minerals finnemanite Pb5(As3+O3)3Cl been studied by Raman spectroscopy. The most intense Raman band at 871 cm-1 is assigned to the ν1 (AsO3)3- symmetric stretching vibration. Three Raman bands at 898, 908 and 947 cm-1 are assigned to the ν3 (AsO3)3- antisymmetric stretching vibration. The observation of multiple antisymmetric stretching vibrations suggest that the (AsO3)3- units are not equivalent in the molecular structure of finnemanite. Two Raman bands at 383 and 399 cm-1 are assigned to the ν2 (AsO3)3- bending modes. DFT calculations enabled the position of AsO32- symmetric stretching mode at 839 cm-1, the antisymmetric stretching mode at 813 cm-1, and the deformation mode at 449 cm-1 to be calculated. Raman bands are observed at 115, 145, 162, 176, 192, 216 and 234 cm-1 as well. The two most intense bands are observed at 176 and 192 cm-1. These bands are assigned to PbCl stretching vibrations and result from transverse/ longitudinal splitting. The bands at 145 and 162 cm-1 may be assigned to Cl-Pb-Cl bending modes.

Perceptual deterrence versus current behaviours : a study into factors influencing drug driving in Queensland

A range of interventions are being implemented in Australia to apprehend and deter drug driving behaviour, in particular the recent implementation of random roadside drug testing procedures in Queensland. Given this countermeasure has a strong deterrence foundation, it is of interest to determine whether deterrence-based perceptual factors are influencing this offending behaviour or whether self-reported drug driving is heavily dependent upon illicit substance consumption levels and past offending behaviour. This study involves a sample of Queensland motorists (N = 898) who completed a self-report questionnaire that collected a range of information, including drug driving and drug consumption practices, conviction history, and perceptual deterrence factors. The aim was to examine what factors influence current drug driving behaviours. Analysis of the collected data revealed that approximately 20% of participants reported drug driving at least once in the last six months. Overall, there was considerable variability in the respondents' perceptions regarding the certainty, severity and swiftness of legal sanctions, although the largest proportion of the sample did not consider such sanctions to be certain, severe or swift. In regard to predicting those who intended to drug drive again in the future, a combination of perceptual and behavioural-based factors were associated with such intentions. However, a closer examination revealed that behaviours, rather than perceptions, proved to have a greater level of influence on the current sample's future intentions to offend. This paper further outlines the major findings of the study and highlights that multi-modal interventions are most likely required to reduce the prevalence of drug driving on public roads.

The Arab Spring and social media audiences : English and Arabic Twitter users and their networks

Although popular media narratives about the role of social media in driving the events of the 2011 “Arab Spring” are likely to overstate the impact of Facebook and Twitter on these uprisings, it is nonetheless true that protests and unrest in countries from Tunisia to Syria generated a substantial amount of social media activity. On Twitter alone, several millions of tweets containing the hashtags #libya or #egypt were generated during 2011, both by directly affected citizens of these countries and by onlookers from further afield. What remains unclear, though, is the extent to which there was any direct interaction between these two groups (especially considering potential language barriers between them). Building on hashtag data sets gathered between January and November 2011, this article compares patterns of Twitter usage during the popular revolution in Egypt and the civil war in Libya. Using custom-made tools for processing “big data,” we examine the volume of tweets sent by English-, Arabic-, and mixed-language Twitter users over time and examine the networks of interaction (variously through @replying, retweeting, or both) between these groups as they developed and shifted over the course of these uprisings. Examining @reply and retweet traffic, we identify general patterns of information flow between the English- and Arabic-speaking sides of the Twittersphere and highlight the roles played by users bridging both language spheres.

Physical activity patterns of Singaporean adolescents

The purpose of this study was to document the level of physical activity and sedentary behavior in a representative sample of Singaporean adolescents. A random sample of 1,827 secondary school students from six secondary schools (929 boys, 898 girls, mean age 14.9 +/- 1.2 yr) completed the Three-Day Physical Activity Recall (3DPAR) self-report instrument. Approximately 63% of Singaporean high school students met current guidelines requiring 60 min of moderate to vigorous physical activity daily. Just over half (51.6%) met the guideline calling for regular vigorous physical activity. Across all grade levels, boys were consistently more active than girls. More than 70% of Singaporean high school students exceeded the recommended 2 hours per day of electronic media use. Collectively, these findings suggest that a significant proportion of Singaporean adolescents are not sufficiently active and are in need of programs to promote physical activity and decrease sedentary behavior.

Urban citizenship in a sensor rich society

Urban public spaces are sutured with a range of surveillance and sensor technologies that claim to enable new forms of ‘data based citizen participation’, but also increase the tendency for ‘function-creep’, whereby vast amounts of data are gathered, stored and analysed in a broad application of urban surveillance. This kind of monitoring and capacity for surveillance connects with attempts by civic authorities to regulate, restrict, rebrand and reframe urban public spaces. A direct consequence of the increasingly security driven, policed, privatised and surveilled nature of public space is the exclusion or ‘unfavourable inclusion’ of those considered flawed and unwelcome in the ‘spectacular’ consumption spaces of many major urban centres. This paper suggests that cities, places and spaces and those who seek to use them, can be resilient in working to maintain and extend democratic freedoms and processes enshrined in Marshall’s concept of citizenship, calling sensor and surveillance systems to account. Such accountability could better inform the implementation of public policy around the design, build and governance of public space and also understandings of urban citizenship in the sensor saturated urban environment.

Meltdown : a tool to help in the interpretation of thermal melt curves acquired by differential scanning fluorimetry

The output of a differential scanning fluorimetry (DSF) assay is a series of melt curves, which need to be interpreted to get value from the assay. An application that translates raw thermal melt curve data into more easily assimilated knowledge is described. This program, called “Meltdown,” conducts four main activities—control checks, curve normalization, outlier rejection, and melt temperature (Tm) estimation—and performs optimally in the presence of triplicate (or higher) sample data. The final output is a report that summarizes the results of a DSF experiment. The goal of Meltdown is not to replace human analysis of the raw fluorescence data but to provide a meaningful and comprehensive interpretation of the data to make this useful experimental technique accessible to inexperienced users, as well as providing a starting point for detailed analyses by more experienced users.

A LIN inspired optical bus for signal isolation in multilevel or modular power electronic converters

Proposed in this paper is a low-cost, half-duplex optical communication bus for control signal isolation in modular or multilevel power electronic converters. The concept is inspired by the Local Interconnect Network (LIN) serial network protocol as used in the automotive industry. The proposed communications bus utilises readily available optical transceivers and is suitable for use with low-cost microcontrollers for distributed control of multilevel converters. As a signal isolation concept, the proposed optical bus enables very high cell count modular multilevel cascaded converters (MMCCs) for high-bandwidth, high-voltage and high-power applications. Prototype hardware is developed and the optical bus concept is validated experimentally in a 33-level MMCC converter operating at 120 Vrms and 60 Hz.

Diabetes mellitus and the risk of depressive and anxiety disorders in Australian women: A longitudinal study

Background Longitudinal studies examining the risk of depressive and anxiety disorders associated with diabetes are limited. This study examined the association between diabetes and the risk of depressive and anxiety disorders in Australian women using longitudinal data. Methods Datawere froma sample of women who were part of anAustralian pregnancy and birth cohort study. Data comprised self-reported diabetes mellitus and the subsequent reporting of depressive and anxiety disorders. Mood disorders were assessed according to the Diagnostic and Statistical Manual of Mental Disorders, fourth edition, obtained from participants using Composite International Diagnostic Interview (CIDI)-Auto (WHO WMH-CIDI CAPI, version 21.1.3). Multiple regression models with adjustment for important covariates were used. Results Women with diabetes had a higher lifetime prevalence of any depressive and/or anxiety disorder than women without diabetes. About 3 in 10 women with diabetes experienced a lifetime event of any depressive disorder, while 1 in 2 women with diabetes experienced a lifetime event of any anxiety disorder. In prospective analyses, diabetes was only significantly associated with a 30-day episode of any anxiety disorder (odds ratio [OR] 1.53, 95% confidence interval [CI] 1.09–2.15). In the case of lifetime disorders, diabetes was significantly associated with any depressive disorder (OR 1.37, 95% CI 1.03–1.84), major depressive disorder (OR 1.36, 95% CI 1.01–1.85), and posttraumatic stress disorder (OR 1.42, 95% CI 1.01–2.02). Conclusions The findings suggest that the presence of diabetes is a significant risk factor for women experiencing current anxiety disorders. However, in the case of depression, the association with diabetes only held for women who had experienced past episodes, there was no association with current depression. This suggests that the evidence is not strong enough to support a direct effect of diabetes as a cause of mood disorders.

Effect of bond length on the behaviour of CFRP strengthened concrete-filled steel tubes under transverse impact

Concrete-filled steel tubular (CFST) columns have shown great potential as axial load carrying member and used widely in many mission critical infrastructures. However, attention is needed to strengthen these members where transverse impact force is expected to occur due to vehicle collisions. In this work, finite element (FE) model of carbon fibre reinforced polymer (CFRP) strengthened CFST columns are developed and the effect of CFRP bond length is investigated under transverse impact loading. Initially the numerical models have been validated by comparing impact test results from literature. The validated models are then used for detail parametric studies by varying the length of externally bonded CFRP composites. The parameters considered for this research are impact velocity, impact mass, CFRP modulus, adhesive type, and axial static loading. It has been observed that the effect of CFRP strengthening is consistent after an optimum effective bond length of CFRP wrapping. The effect of effective bond length has been studied for above parameters. The results show that, under combined axial static and transverse impact loads CFST columns can successfully prevent global buckling failure by strengthening only 34% of column length. Therefore, estimation of effective bond length is essential to utilise the CFRP composites cost effectively.

Genome-wide association study using extreme truncate selection identifies novel genes affecting bone mineral density and fracture risk

Osteoporotic fracture is a major cause of morbidity and mortality worldwide. Low bone mineral density (BMD) is a major predisposing factor to fracture and is known to be highly heritable. Site-, gender-, and age-specific genetic effects on BMD are thought to be significant, but have largely not been considered in the design of genome-wide association studies (GWAS) of BMD to date. We report here a GWAS using a novel study design focusing on women of a specific age (postmenopausal women, age 55-85 years), with either extreme high or low hip BMD (age- and gender-adjusted BMD z-scores of +1.5 to +4.0, n = 1055, or -4.0 to -1.5, n = 900), with replication in cohorts of women drawn from the general population (n = 20,898). The study replicates 21 of 26 known BMD-associated genes. Additionally, we report suggestive association of a further six new genetic associations in or around the genes CLCN7, GALNT3, IBSP, LTBP3, RSPO3, and SOX4, with replication in two independent datasets. A novel mouse model with a loss-of-function mutation in GALNT3 is also reported, which has high bone mass, supporting the involvement of this gene in BMD determination. In addition to identifying further genes associated with BMD, this study confirms the efficiency of extreme-truncate selection designs for quantitative trait association studies. © 2011 Duncan et al.

Identity-by-Descent Mapping to Detect Rare Variants Conferring Susceptibility to Multiple Sclerosis

Genome-wide association studies (GWAS) have identified around 60 common variants associated with multiple sclerosis (MS), but these loci only explain a fraction of the heritability of MS. Some missing heritability may be caused by rare variants that have been suggested to play an important role in the aetiology of complex diseases such as MS. However current genetic and statistical methods for detecting rare variants are expensive and time consuming. 'Population-based linkage analysis' (PBLA) or so called identity-by-descent (IBD) mapping is a novel way to detect rare variants in extant GWAS datasets. We employed BEAGLE fastIBD to search for rare MS variants utilising IBD mapping in a large GWAS dataset of 3,543 cases and 5,898 controls. We identified a genome-wide significant linkage signal on chromosome 19 (LOD = 4.65; p = 1.9×10-6). Network analysis of cases and controls sharing haplotypes on chromosome 19 further strengthened the association as there are more large networks of cases sharing haplotypes than controls. This linkage region includes a cluster of zinc finger genes of unknown function. Analysis of genome wide transcriptome data suggests that genes in this zinc finger cluster may be involved in very early developmental regulation of the CNS. Our study also indicates that BEAGLE fastIBD allowed identification of rare variants in large unrelated population with moderate computational intensity. Even with the development of whole-genome sequencing, IBD mapping still may be a promising way to narrow down the region of interest for sequencing priority. © 2013 Lin et al.

Genome-wide association study of ankylosing spondylitis identifies non-MHC susceptibility loci

To identify susceptibility loci for ankylosing spondylitis, we undertook a genome-wide association study in 2,053 unrelated ankylosing spondylitis cases among people of European descent and 5,140 ethnically matched controls, with replication in an independent cohort of 898 ankylosing spondylitis cases and 1,518 controls. Cases were genotyped with Illumina HumHap370 genotyping chips. In addition to strong association with the major histocompatibility complex (MHC; P 10 800), we found association with SNPs in two gene deserts at 2p15 (rs10865331; combined P = 1.9 × 10 19) and 21q22 (rs2242944; P = 8.3 × 10 20), as well as in the genes ANTXR2 (rs4333130; P = 9.3 × 10 8) and IL1R2 (rs2310173; P = 4.8 × 10 7). We also replicated previously reported associations at IL23R (rs11209026; P = 9.1 × 10 14) and ERAP1 (rs27434; P = 5.3 × 10 12). This study reports four genetic loci associated with ankylosing spondylitis risk and identifies a major role for the interleukin (IL)-23 and IL-1 cytokine pathways in disease susceptibility. © 2010 Nature America, Inc. All rights reserved.

Determination of refractive and volatile elements in sediment using laser ablation inductively coupled plasma mass spectrometry

Wet-milling protocol was employed to produce pressed powder tablets with excellent cohesion and homogeneity suitable for laser ablation (LA) analysis of volatile and refractive elements in sediment. The influence of sample preparation on analytical performance was also investigated, including sample homogeneity, accuracy and limit of detection. Milling in volatile solvent for 40 min ensured sample is well mixed and could reasonably recover both volatile (Hg) and refractive (Zr) elements. With the exception of Cr (−52%) and Nb (+26%) major, minor and trace elements in STSD-1 and MESS-3 could be analysed within ±20% of the certified values. Comparison of the method with total digestion method using HF was tested by analysing 10 different sediment samples. The laser method recovers significantly higher amounts of analytes such as Ag, Cd, Sn and Sn than the total digestion method making it a more robust method for elements across the periodic table. LA-ICP-MS also eliminates the interferences from chemical reagents as well as the health and safety risks associated with digestion processes. Therefore, it can be considered as an enhanced method for the analysis of heterogeneous matrices such as river sediments.