Issues in the development of pitch labelling skill

Pitch discrimination skills are important for general musicianship. The ability to name musical notes or produce orally any named note without the benefit of a known reference is called Absolute Pitch (AP) and is comparatively rare. Relative Pitch (RP) is the ability to name notes when a known reference is available. AP has historically been regarded as being innate. This paper will examine the notion that pitch discrimination skill is based on knowledge constructed through a suite of experiences. That is, it is learnt. In particular, it will be argued that early experiences promote the development of AP. Second it will argue that AP and RP represent different types of knowledge, and that this knowledge emerges from different experiences. AP is a unique research phenomenon because it spans the fields of cognition and perception, in that it links verbal labels with physiological sensations, and because of its rarity. It may provide a vantage for investigating the nature/nurture of musicianship; expertise; knowledge structure development; and the role of knowledge in perception. The study of AP may inform educational practice and curriculum design both in music and cross-curriculur. This paper will report an initial investigation into the similarities and differences between the musical experiences of AP possessors and the manifestation of their AP skill. Interview and questionnaire data will be used for the development and proposal of a preliminary model for AP development.

Product labelling can confer sustained increases in expected and actual satiety

Expected satiety has been shown to play a key role in decisions around meal size. Recently it has become clear that these expectations can also influence the satiety that is experienced after a food has been consumed. As such, increasing the expected and actual satiety a food product confers without increasing its caloric content is of importance. In this study we sought to determine whether this could be achieved via product labelling. Female participants (N=75) were given a 223-kcal yoghurt smoothie for lunch. In separate conditions the smoothie was labelled as a diet brand, a highly-satiating brand, or an ‘own brand’ control. Expected satiety was assessed using rating scales and a computer-based ‘method of adjustment’, both prior to consuming the smoothie and 24 hours later. Hunger and fullness were assessed at baseline, immediately after consuming the smoothie, and for a further three hours. Despite the fact that all participants consumed the same food, the smoothie branded as highly-satiating was consistently expected to deliver more satiety than the other ‘brands’; this difference was sustained 24 hours after consumption. Furthermore, post-consumption and over three hours, participants consuming this smoothie reported significantly less hunger and significantly greater fullness. These findings demonstrate that the satiety that a product confers depends in part on information that is present around the time of consumption. We suspect that this process is mediated by changes to expected satiety. These effects may potentially be utilised in the development of successful weight-management products.

Semantic labelling for document feature patterns using ontological subjects

Finding and labelling semantic features patterns of documents in a large, spatial corpus is a challenging problem. Text documents have characteristics that make semantic labelling difficult; the rapidly increasing volume of online documents makes a bottleneck in finding meaningful textual patterns. Aiming to deal with these issues, we propose an unsupervised documnent labelling approach based on semantic content and feature patterns. A world ontology with extensive topic coverage is exploited to supply controlled, structured subjects for labelling. An algorithm is also introduced to reduce dimensionality based on the study of ontological structure. The proposed approach was promisingly evaluated by compared with typical machine learning methods including SVMs, Rocchio, and kNN.

Challenges facing carbon dioxide labelling of construction materials

In the absence of a benchmarking mechanism specifically designed for local requirements and characteristics, a carbon dioxide footprint assessment and labelling scheme for construction materials is urgently needed to promote carbon dioxide reduction in the construction industry. This paper reports on a recent interview survey of 18 senior industry practitioners in Hong Kong to elicit their knowledge and opinions concerning the potential of such a carbon dioxide labelling scheme. The results of this research indicate the following. A well-designed carbon dioxide label could stimulate demand for low carbon dioxide construction materials. The assessment of carbon dioxide emissions should be extended to different stages of material lifecycles. The benchmarks for low carbon dioxide construction materials should be based on international standards but without sacrificing local integrity. Administration and monitoring of the carbon dioxide labelling scheme could be entrusted to an impartial and independent certification body. The implementation of any carbon dioxide labelling schemes should be on a voluntary basis. Cost, functionality, quality and durability are unlikely to be replaced by environmental considerations in the absence of any compelling incentives or penalties. There are difficulties in developing and operating a suitable scheme, particularly in view of the large data demands involved, reluctance in using low carbon dioxide materials and limited environmental awareness.

Monitoring the health-related labelling of foods and non-alcoholic beverages in retail settings

Food labelling on food packaging has the potential to have both positive and negative effects on diets. Monitoring different aspects of food labelling would help to identify priority policy options to help people make healthier food choices. A taxonomy of the elements of health-related food labelling is proposed. A systematic review of studies that assessed the nature and extent of health-related food labelling has been conducted to identify approaches to monitoring food labelling. A step-wise approach has been developed for independently assessing the nature and extent of health-related food labelling in different countries and over time. Procedures for sampling the food supply, and collecting and analysing data are proposed, as well as quantifiable measurement indicators and benchmarks for health-related food labelling.

EdU, a new thymidine analogue for labelling proliferating cells in the nervous system

The standard method of labelling proliferating cells uses the thymidine analogue, bromodeoxyuridine (BrdU), which incorporates into the DNA during S-phase of the cell cycle. A disadvantage of this method is that the immunochemical processing requires pre-treatment of the cells and tissue with heat or acid to reveal the antigen. This pre-treatment reduces reliability of the method and degrades the specimen, reducing the ability for multiple immuno-fluorescence labelling at high resolution. We report here the utility of a novel thymidine analogue, ethynyl deoxyuridine (EdU), detected with a fluorescent azide via the “click” chemistry reaction (the Huisgen 1,3-dipolar cycloaddition reaction of an organic azide to a terminal acetylene). The detection of EdU requires no heat or acid treatment and the incorporated EdU is covalently conjugated to fluorescent probe. The reaction is quick and compatible with fluorescence immunochemistry and other fluorescent probes. We show here that EdU is non-toxic in vitro and in vivo and can be used in place of BrdU to label cells during neurogenesis and the progeny identified at least 30 days later. The fluorescent labelling of EdU, markedly improves the detection of proliferating cells and allows concurrent high resolution fluorescence immunochemistry.

The past, present and future of carbon labelling for construction materials – a review

Global climate change is one of the most significant environmental issues that can harm human development. One central issue for the building and construction industry to address global climate change is the development of a credible and meaningful way to measure greenhouse gas (GHG) emissions. While Publicly Available Specification (PAS) 2050, the first international GHG standard, has been proven to be successful in standardizing the quantification process, its contribution to the management of carbon labels for construction materials is limited. With the recent publication of ISO 14067: Greenhouse gases – carbon footprint of products – requirements and guidelines for quantification and communication in May 2013, it is necessary for the building and construction industry to understand the past, present and future of the carbon labelling practices for construction materials. A systematic review shows that international GHG standards have been evolving in terms of providing additional guidance on communication and comparison, as well as less flexibility on the use of carbon labels. At the same time, carbon labelling schemes have been evolving on standardization and benchmarking. In addition, future actions are needed in the aspect of raising consumer awareness, providing benchmarking, ensuring standardization and developing simulation technologies in order for carbon labelling schemes for construction materials to provide credible, accurate and transparent information on GHG emissions.

Self-labelling versus behavioural experience of workplace bullying : differences in sector- and industry-level prevalence and sources

This study reports on differences in self-labelling versus the behavioural experience of workplace bullying across sectors and industries for a sample of 6,406 Australian employees, as well as differences in source of workplace bullying. It was found that overall prevalence rates of workplace bullying were 2.9% (self-labelling method) and 4.0% (behavioural experience method). Exposure to workplace bullying was found to decrease with age. There was no significant difference between the public and private sectors, or among industries, in the prevalence of workplace bullying; however, two industries (Construction; Health and Community Services) showed a significantly higher rate of workplace bullying with the behavioural experience method compared to the self-labelling method. For the overall sample, the most prevalent source of workplace bullying was reported to be coworkers (49.1%), followed by clients (35.7%), and then supervisors (27.4%). Subordinates were rated as the source in 7.9% of cases. Closer examination of source as a function of sector and industry revealed a number of significant differences specific to sectors and industries, highlighting the need for tailored approaches for managing workplace bullying.

Achieving transparency in carbon labelling for construction materials – Lessons from current assessment standards and carbon labels

The construction industry is one of the largest sources of carbon emissions. Manufacturing of raw materials, such as cement, steel and aluminium, is energy intensive and has considerable impact on carbon emissions level. Due to the rising recognition of global climate change, the industry is under pressure to reduce carbon emissions. Carbon labelling schemes are therefore developed as meaningful yardsticks to measure and compare carbon emissions. Carbon labelling schemes can help switch consumer-purchasing habits to low-carbon alternatives. However, such switch is dependent on a transparent scheme. The principle of transparency is highlighted in all international greenhouse gas (GHG) standards, including the newly published ISO 14067: Carbon footprint of products – requirements and guidelines for quantification and communication. However, there are few studies which systematically investigate the transparency requirements in carbon labelling schemes. A comparison of five established carbon labelling schemes, namely the Singapore Green Labelling Scheme, the CarbonFree (the U.S.), the CO2 Measured Label and the Reducing CO2 Label (UK), the CarbonCounted (Canada), and the Hong Kong Carbon Labelling Scheme is therefore conducted to identify and investigate the transparency requirements. The results suggest that the design of current carbon labels have transparency issues relating but not limited to the use of a single sign to represent the comprehensiveness of the carbon footprint. These transparency issues are partially caused by the flexibility given to select system boundary in the life cycle assessment (LCA) methodology to measure GHG emissions. The primary contribution of this study to the construction industry is to reveal the transparency requirements from international GHG standards and carbon labels for construction products. The findings also offer five key strategies as practical implications for the global community to improve the performance of current carbon labelling schemes on transparency.

Just label it: Consumer rights, GM food labelling, and international trade

In the United States, there has been fierce debate over state, federal and international efforts to engage in genetically modified food labelling (GM food labelling). A grassroots coalition of consumers, environmentalists, organic farmers, and the food movement has pushed for law reform in respect of GM food labelling. The Just Label It campaign has encouraged United States consumers to send comments to the United States Food and Drug Administration to label genetically modified foods. This Chapter explores the various justifications made in respect of genetically modified food labelling. There has been a considerable effort to portray the issue of GM food labelling as one of consumer rights as part of ‘the right to know’. There has been a significant battle amongst farmers over GM food labelling – with organic farmers and biotechnology companies, fighting for precedence. There has also been a significant discussion about the use of GM food labelling as a form of environmental legislation. The prescriptions in GM food labelling regulations may serve to promote eco-labelling, and deter greenwashing. There has been a significant debate over whether GM food labelling may serve to regulate corporations – particularly from the food, agriculture, and biotechnology industries. There are significant issues about the interaction between intellectual property laws – particularly in respect of trade mark law and consumer protection – and regulatory proposals focused upon biotechnology. There has been a lack of international harmonization in respect of GM food labelling. As such, there has been a major use of comparative arguments about regulator models in respect of food labelling. There has also been a discussion about international law, particularly with the emergence of sweeping regional trade proposals, such as the Trans-Pacific Partnership, and the Trans-Atlantic Trade and Investment Partnership. This Chapter considers the United States debates over genetically modified food labelling – at state, federal, and international levels. The battles often involved the use of citizen-initiated referenda. The policy conflicts have been policy-centric disputes – pitting organic farmers, consumers, and environmentalists against the food industry and biotechnology industry. Such battles have raised questions about consumer rights, public health, freedom of speech, and corporate rights. The disputes highlighted larger issues about lobbying, fund-raising, and political influence. The role of money in United States has been a prominent concern of Lawrence Lessig in his recent academic and policy work with the group, Rootstrikers. Part 1 considers the debate in California over Proposition 37. Part 2 explores other key state initiatives in respect of GM food labelling. Part 3 examines the Federal debate in the United States over GM food labelling. Part 4 explores whether regional trade agreements – such as the Trans-Pacific Partnership (TPP) and the Trans-Atlantic Trade and Investment Partnership (TTIP) – will impact upon

A review of benchmarking in carbon labelling schemes for building materials

As one of the largest sources of greenhouse gas (GHG) emissions, the building and construction sector is facing increasing pressure to reduce its life cycle GHG emissions. One central issue in striving towards reduced carbon emissions in the building and construction sector is to develop a practical and meaningful yardstick to assess and communicate GHG results through carbon labelling. The idea of carbon labelling schemes for building materials is to trigger a transition to a low carbon future by switching consumer-purchasing habits to low-carbon alternatives. As such, failing to change purchasing pattern and behaviour can be disastrous to carbon labelling schemes. One useful tool to assist customers to change their purchasing behaviour is benchmarking, which has been very commonly used in ecolabelling schemes. This paper analyses the definition and scope of benchmarking in the carbon labelling schemes for building materials. The benchmarking process has been examined within the context of carbon labelling. Four practical issues for the successful implementation of benchmarking, including the availability of benchmarks and databases, the usefulness of different types of benchmarks and the selection of labelling practices have also been clarified.

Dual acquisition of 18F-FMISO and 18F-FDOPA

Metabolic imaging using positron emission tomography (PET) has found increasing clinical use for the management of infiltrating tumours such as glioma. However, the heterogeneous biological nature of tumours and intrinsic treatment resistance in some regions means that knowledge of multiple biological factors is needed for effective treatment planning. For example, the use of 18F-FDOPA to identify infiltrative tumour and 18F-FMISO for localizing hypoxic regions. Performing multiple PET acquisitions is impractical in many clinical settings, but previous studies suggest multiplexed PET imaging could be viable. The fidelity of the two signals is affected by the injection interval, scan timing and injected dose. The contribution of this work is to propose a framework to explicitly trade-off signal fidelity with logistical constraints when designing the imaging protocol. The particular case of estimating 18F-FMISO from a single frame prior to injection of 18F-FDOPA is considered. Theoretical experiments using simulations for typical biological scenarios in humans demonstrate that results comparable to a pair of single-tracer acquisitions can be obtained provided protocol timings are carefully selected. These results were validated using a pre-clinical data set that was synthetically multiplexed. The results indicate that the dual acquisition of 18F-FMISO and 18F-FDOPA could be feasible in the clinical setting. The proposed framework could also be used to design protocols for other tracers.

Diversity of accuracy profiles for absolute pitch recognition

Most advanced musicians are able to identify and label a heard pitch if given an opportunity to compare it to a known reference note. This is called ‘relative pitch’ (RP). A much rarer skill is the ability to identify and label a heard pitch without the need for a reference. This is colloquially referred to as ‘perfect pitch’, but appears in the academic literature as ‘absolute pitch’ (AP). AP is considered by many as a remarkable skill. As people do not seem able to develop it intentionally, it is generally regarded as innate. It is often seen as a unitary skill and that a set of identifiable criteria can distinguish those who possess the skill from those who do not. However, few studies have interrogated these notions. The present study developed and applied an interactive computer program to map pitch-labelling responses to various tonal stimuli without a known reference tone available to participants. This approach enabled the identification of the elements of sound that impacted on AP. Pitch-labelling responses of 14 participants with AP were recorded for their accuracy. Each participant’s response to the stimuli was unique. Their accuracy of labelling varied across dimensions such as timbre, range and tonality. The diversity of performance between individuals appeared to reflect their personal musical experience histories.

The manipulation of apoptosis-related genes to generate resistance to Fusarium wilt and water stress in banana

Bananas are susceptible to a diverse range of biotic and abiotic stresses, many of which cause serious production constraints worldwide. One of the most destructive banana diseases is Fusarium wilt caused by the soil-borne fungus, Fusarium oxysporum f. sp. cubense (Foc). No effective control strategy currently exists for this disease which threatens global banana production. Although disease resistance exists in some wild bananas, attempts to introduce resistance into commercially acceptable bananas by conventional breeding have been hampered by low fertility, long generation times and association of poor agronomical traits with resistance genes. With the advent of reliable banana transformation protocols, molecular breeding is now regarded as a viable alternative strategy to generate disease-resistant banana plants. Recently, a novel strategy involving the expression of anti-apoptosis genes in plants was shown to result in resistance against several necrotrophic fungi. Further, the transgenic plants showed increased resistance to a range of abiotic stresses. In this thesis, the use of anti-apoptosis genes to generate transgenic banana plants with resistance to Fusarium wilt was investigated. Since water stress is an important abiotic constraint to banana production, the resistance of the transgenic plants to water stress was also examined. Embryogenic cell suspensions (ECS) of two commercially important banana cultivars, Grand Naine (GN) and Lady Finger (LF), were transformed using Agrobacterium with the anti-apoptosis genes, Bcl-xL, Bcl-xL G138A, Ced-9 and Bcl- 2 3’ UTR. An interesting, and potentially important, outcome was that the use of anti-apoptosis genes resulted in up to a 50-fold increase in Agrobacterium-mediated transformation efficiency of both LF and GN cells over vector controls. Regenerated plants were subjected to a complete molecular characterisation in order to detect the presence of the transgene (PCR), transcript (RT-PCR) and gene product (Western blot) and to determine the gene copy number (Southern blot). A total of 36 independently-transformed GN lines (8 x Bcl-xL, 5 x Bcl-xL G138A, 15 x Ced-9 and 8 x Bcl-2 3’ UTR) and 41 independently-transformed LF lines (8 x Bcl-xL, 7 x BclxL G138A, 13 x Ced-9 and 13 x Bcl-2 3’ UTR) were identified. The 41 transgenic LF lines were multiplied and clones from each line were acclimatised and grown under glasshouse conditions for 8 weeks to allow monitoring for phenotypic abnormalities. Plants derived from 3 x Bcl-xL, 2 x Ced-9 and 5 x Bcl-2 3’ UTR lines displayed a variety of aberrant phenotypes. However, all but one of these abnormalities were off-types commonly observed in tissue-cultured, non-transgenic banana plants and were therefore unlikely to be transgene-related. Prior to determining the resistance of the transgenic plants to Foc race 1, the apoptotic effects of the fungus on both wild-type and Bcl-2 3’ UTR-transgenic LF banana cells were investigated using rapid in vitro root assays. The results from these assays showed that apoptotic-like cell death was elicited in wild-type banana root cells as early as 6 hours post-exposure to fungal spores. In contrast, these effects were attenuated in the root cells of Bcl-2 3’ UTR-transgenic lines that were exposed to fungal spores. Thirty eight of the 41 transgenic LF lines were subsequently assessed for resistance to Foc race 1 in small-plant glasshouse bioassays. To overcome inconsistencies in rating the internal (vascular discolouration) disease symptoms, a MatLab-based computer program was developed to accurately and reliably assess the level of vascular discolouration in banana corms. Of the transgenic LF banana lines challenged with Foc race 1, 2 x Bcl-xL, 3 x Ced-9, 2 x Bcl-2 3’ UTR and 1 x Bcl-xL G138A-transgenic line were found to show significantly less external and internal symptoms than wild-type LF banana plants used as susceptible controls at 12 weeks post-inoculation. Of these lines, Bcl-2 3’ UTR-transgenic line #6 appeared most resistant, displaying very mild symptoms similar to the wild-type Cavendish banana plants that were included as resistant controls. This line remained resistant for up to 23 weeks post-inoculation. Since anti-apoptosis genes have been shown to confer resistance to various abiotic stresses in other crops, the ability of these genes to confer resistance against water stress in banana was also investigated. Clonal plants derived from each of the 38 transgenic LF banana plants were subjected to water stress for a total of 32 days. Several different lines of transgenic plants transformed with either Bcl-xL, Bcl-xL G138A, Ced-9 or Bcl-2 3’ UTR showed a delay in visual water stress symptoms compared with the wild-type control plants. These plants all began producing new growth from the pseudostem following daily rewatering for one month. In an attempt to determine whether the protective effect of anti-apoptosis genes in transgenic banana plants was linked with reactive oxygen species (ROS)-associated programmed cell death (PCD), the effect of the chloroplast-targeting, ROS-inducing herbicide, Paraquat, on wild-type and transgenic LF was investigated. When leaf discs from wild-type LF banana plants were exposed to 10 ìM Paraquat, complete decolourisation occurred after 48 hours which was confirmed to be associated with cell death and ROS production by trypan blue and 3,3-diaminobenzidine (DAB) staining, respectively. When leaf discs from the transgenic lines were exposed to Paraquat, those derived from some lines showed a delay in decolourisation, suggesting only a weak protective effect from the transgenes. Finally, the protective effect of anti-apoptosis genes against juglone, a ROS-inducing phytotoxin produced by the causal agent of black Sigatoka, Mycosphaerella fijiensis, was investigated. When leaf discs from wild-type LF banana plants were exposed to 25 ppm juglone, complete decolourisation occurred after 48 hours which was again confirmed to be associated with cell death and ROS production by trypan blue and DAB staining, respectively. Further, TdT-mediated dUTP nick-end labelling (TUNEL) assays on these discs suggested that the cell death was apoptotic. When leaf discs from the transgenic lines were exposed to juglone, discs from some lines showed a clear delay in decolourisation, suggesting a protective effect. Whether these plants are resistant to black Sigatoka is unknown and will require future glasshouse and field trials. The work presented in this thesis provides the first report of the use of anti-apoptosis genes as a strategy to confer resistance to Fusarium wilt and water stress in a nongraminaceous monocot, banana. Such a strategy may be exploited to generate resistance to necrotrophic pathogens and abiotic stresses in other economically important crop plants.

Conceptions of school based youth health nursing : a phenomenographic study

The School Based Youth Health Nurse Program was established in 1999 by the Queensland Government to fund school nurse positions in Queensland state high schools. Schools were required to apply for a School Based Youth Health Nurse during a five-phase recruitment process, managed by the health districts, and rolled out over four years. The only mandatory selection criterion for the position of School Based Youth Health Nurse was registration as a General Nurse and most School Based Youth Health Nurses are allocated to two state high schools. Currently, there are approximately 115 Full Time Equivalent School Based Youth Health Nurse positions across all Queensland state high schools. The literature review revealed an abundance of information about school nursing. Most of the literature came from the United Kingdom and the United States, who have a different model of school nursing to school based youth health nursing. However, there is literature to suggest school nursing is gradually moving from a disease-focused approach to a social view of health. The noticeable number of articles about, for example, drug and alcohol, mental health, and contemporary sexual health issues, is evidence of this change. Additionally, there is a significant the volume of literature about partnerships and collaboration, much of which is about health education, team teaching and how school nurses and schools do health business together. The surfacing of this literature is a good indication that school nursing is aligning with the broader national health priority areas. More particularly, the literature exposed a small but relevant and current body of research, predominantly from Queensland, about school based youth health nursing. However, there remain significant gaps in the knowledge about school based youth health nursing. In particular, there is a deficit about how School Based Youth Heath Nurses understand the experience of school based youth health nursing. This research aimed to reveal the meaning of the experience of school based youth health nursing. The research question was How do School Based Youth Health Nurses’ understand the experience of school based youth health nursing? This enquiry was instigated because the researcher, who had a positive experience of school based youth health nursing, considered it important to validate other School Based Youth Health Nurses’ experiences. Consequently, a comprehensive use of qualitative research was considered the most appropriate manner to explore this research question. Within this qualitative paradigm, the research framework consists of the epistemology of social constructionism, the theoretical perspective of interpretivism and the approach of phenomenography. After ethical approval was gained, purposeful and snowball sampling was used to recruit a sample of 16 participants. In-depth interviews, which were voluntary, confidential and anonymous, were mostly conducted in public venues and lasted from 40-75 minutes. The researcher also kept a researchers journal as another form of data collection. Data analysis was guided by Dahlgren and Fallsbergs’ (1991, p. 152) seven phases of data analysis which includes familiarization, condensation, comparison, grouping, articulating, labelling and contrasting. The most important finding in this research is the outcome space, which represents the entirety of the experience of school based youth health nursing. The outcome space consists of two components: inside the school environment and outside the school environment. Metaphorically and considered as whole-in-themselves, these two components are not discreet but intertwined with each other. The outcome space consists of eight categories. Each category of description is comprised of several sub-categories of description but as a whole, is a conception of school based youth health nursing. The eight conceptions of school based youth health nursing are: 1. The conception of school based youth health nursing as out there all by yourself. 2. The conception of school based youth health nursing as no real backup. 3. The conception of school based youth health nursing as confronted by many barriers. 4. The conception of school based youth health nursing as hectic and full-on. 5. The conception of school based youth health nursing as working together. 6. The conception of school based youth health nursing as belonging to school. 7. The conception of school based youth health nursing as treated the same as others. 8. The conception of school based youth health nursing as the reason it’s all worthwhile. These eight conceptions of school based youth health nursing are logically related and form a staged hierarchical relationship because they are not equally dependent on each other. The conceptions of school based youth health nursing are grouped according to negative, negative and positive and positive conceptions of school based youth health nursing. The conceptions of school based youth health nursing build on each other, from the bottom upwards, to reach the authorized, or the most desired, conception of school based youth health nursing. This research adds to the knowledge about school nursing in general but especially about school based youth health nursing specifically. Furthermore, this research has operational and strategic implications, highlighted in the negative conceptions of school based youth health nursing, for the School Based Youth Health Nurse Program. The researcher suggests the School Based Youth Health Nurse Program, as a priority, address the operational issues The researcher recommends a range of actions to tackle issues and problems associated with accommodation and information, consultations and referral pathways, confidentiality, health promotion and education, professional development, line management and School Based Youth Health Nurse Program support and school management and community. Strategically, the researcher proposes a variety of actions to address strategic issues, such as the School Based Youth Health Nurse Program vision, model and policy and practice framework, recruitment and retention rates and evaluation. Additionally, the researcher believes the findings of this research have the capacity to spawn a myriad of future research projects. The researcher has identified the most important areas for future research as confidentiality, information, qualifications and health outcomes.