Students' engagement with Facebook in a university undergraduate policing unit

Web 2.0 technologies are increasingly being used to support teaching in higher education courses. However, preliminary research has shown that students are using such technologies primarily for social purposes, rather than as a means of further engaging with academic content. This study examines a cohort of tertiary students' use of a Facebook page, which was created for a second year university policing unit at the Queensland University of Technology in Brisbane, Australia. Results from content analysis of the Facebook "wall" and a survey of student users and non-users showed that although students only demonstrated very little active engagement with academic content posted on the site (that is, they were reluctant to interact with unit materials in a way that would leave a digital trace), they reported that Facebook had increased their ability to engage with and critically analyse the unit content. In alignment with other research in this area, students also reported the usefulness of the Facebook page for increasing communication with their peers and with the teaching staff. This paper concludes by offering a number of best practice guidelines for the use of Facebook in tertiary education.

The importance of understanding student learning styles in accounting degree programs

Accounting education is critical and any improvements in tertiary education of accounting students should result in better prepared graduates entering the profession. This study evaluates accounting students’ learning styles and the interaction of learning styles and teaching methodologies during degree programmes. Nine classes of accounting students (648 students) spread across four years and two degree programmes were evaluated. Students self-evaluated their learning style, pre-instruction. They were then subject to two separate teaching techniques (one active and one passive) in each course. Learning styles were then re-assessed and teaching techniques evaluated. Accounting students displayed a preference for passive learning, even those far advanced in their degrees. Furthermore, when learning styles matched teaching methods used, usefulness was assessed as high but when learning styles and teaching methods differed, usefulness deteriorated. Overall, the teaching methods were deemed more effective by active rather than passive learners. The implications are significant. To maximise educational benefit for the accounting profession, student learning styles should be assessed before designing appropriate teaching methodologies. This has resource implications which would have to be considered.

Comparing different approach and avoidance models of learning and personality in the prediction of work, university, and leadership outcomes

Jackson (2005) developed a hybrid model of personality and learning, known as the learning styles profiler (LSP) which was designed to span biological, socio-cognitive, and experiential research foci of personality and learning research. The hybrid model argues that functional and dysfunctional learning outcomes can be best understood in terms of how cognitions and experiences control, discipline, and re-express the biologically based scale of sensation-seeking. In two studies with part-time workers undertaking tertiary education (N equals 137 and 58), established models of approach and avoidance from each of the three different research foci were compared with Jackson's hybrid model in their predictiveness of leadership, work, and university outcomes using self-report and supervisor ratings. Results showed that the hybrid model was generally optimal and, as hypothesized, that goal orientation was a mediator of sensation-seeking on outcomes (work performance, university performance, leader behaviours, and counterproductive work behaviour). Our studies suggest that the hybrid model has considerable promise as a predictor of work and educational outcomes as well as dysfunctional outcomes.

What’s Mime got to do with it?

What has Mime got to do with Corporate Communication? As a professional Mime artist on both stage and screen for more than 25 years, the author has been adapting and applying the techniques of Mime to the corporate communication context over a number of years, coaching corporate CEO’s, Executives and Managers, representing both public and private sector corporations and organisations. This unusual inter-contextual skill transfer is the subject of both a book and series of VODCasts by the author (currently in the final stages of completion), which form part of the author’s Doctoral Research and from which this paper is substantially drawn. The author’s professional background is multi-disciplinary – encompassing theatre, television, media, music, tertiary education and corporate training contexts. It is also inter-disciplinary – concerned with the commonality of different artistic mediums and forms and how, where and why these professional disciplines: intersect; interact, and inform each other – and therefore how they support each other - rather than losing creative/professional opportunities because of areas where they might conflict. This paper examines in particular the physicality of presentation and communication – beyond ‘generic’ body-language analysis. It involves the analysis, manipulation and stylisation of human physicality to support and enhance individual inter-professional communication, and how mime performance skills specifically, inform that process. This paper discusses:- • how mime skills clarify and enhance inter-professional communication. • what adaptations need to be applied in that context • getting a ‘performance’ from ‘non-performers’

Embedded creatives in the Australian manufacturing industry

According to 2011 Australian Census figures, embedded creative employees (creative employees not working in the core Creative Industries) make up 2 per cent (or a total of 17 635) of manufacturing industry employees. The average for all industries is 1.6 per cent. In the 2011–2012 financial year the manufacturing industry formed 7.3 per cent of Australia’s gross domestic product (GDP), contributing approximately AU$106.5 billion to the economy (Department of Industry, Innovation, Science, Research and Tertiary Education 2013). Manufacturing is central to innovation, accounting for over one-quarter of all business expenditure in R&D in 2010–2011, representing around AU$4.8 billion invested in R&D (ibid.). Facing challenges such as sustainability concerns, ever-increasing offshore production and the global financial crisis, the Australian manufacturing industry needs to remain relevant and competitive to succeed. Innovation is one way to do this. Given the contribution of the manufacturing industry to the Australian economy, and the above-average portion of embedded creatives in manufacturing, it is important to consider what exactly embedded creatives add to the industry. This chapter, inspired by the Getting Creative in Healthcare report (Pagan, Higgs and Cunningham 2008), examines the contribution of embedded creatives to innovation in the manufacturing industry via case studies and supplemental data.

Cybercrime attribution : an Eastern European case study

Phishing and related cybercrime is responsible for billions of dollars in losses annually. Gartner reported more than 5 million U.S. consumers lost money to phishing attacks in the 12 months ending in September 2008 (Gartner 2009). This paper asks whether the majority of organised phishing and related cybercrime originates in Eastern Europe rather than elsewhere such as China or the USA. The Russian “Mafiya” in particular has been popularised by the media and entertainment industries to the point where it can be hard to separate fact from fiction but we have endeavoured to look critically at the information available on this area to produce a survey. We take a particular focus on cybercrime from an Australian perspective, as Australia was one of the first places where Phishing attacks against Internet banks were seen. It is suspected these attacks came from Ukrainian spammers. The survey is built from case studies both where individuals from Eastern Europe have been charged with related crimes or unsolved cases where there is some nexus to Eastern Europe. It also uses some earlier work done looking at those early Phishing attacks, archival analysis of Phishing attacks in July 2006 and new work looking at correlation between the Corruption Perception Index, Internet penetration and tertiary education in Russia and the Ukraine. The value of this work is to inform and educate those charged with responding to cybercrime where a large part of the problem originates and try to understand why.

Standards that we can 'own' : Threshold Learning Outcomes for Journalism, Public Relations, and Media & Communication Studies

This paper outlines the progress by the JoMeC (Journalism, Media & Communication) Network in developing TLO (Threshold Learning Outcome) statements for Bachelor-level university programs in the disciplines of Journalism, Public Relations and Media & Communications Studies. The paper presents the finalised TLO statement for Journalism, and outlines moves to engage discipline-based groups to further develop preliminary TLOs for Public Relations and Media & Communication Studies. The JoMeC Network was formed in 2011, in response to requirements that from 2014 all degrees and qualifications at Australian universities would be able to demonstrate that they comply with the threshold learning standards set by the Australian Qualifications Framework (AQF). The AQF’s threshold standards define the minimum types and levels of knowledge, skills and capabilities that a student must demonstrate in order to graduate. The Tertiary Education Quality and Standards Agency (TEQSA) will use the AQF’s threshold standards as a key tool in recording and assessing the performance of higher educational institutions, and determining whether they should be registered as Australian Higher Education Providers under the Higher Education Standards Framework. The Office of Learning & Teaching (OLT) places the onus on discipline communities to collaborate in order to develop and ‘own’ the threshold learning standards that can be considered the minimum learning outcomes of university-level programs in that field. With the support of an OLT Grant, the JoMeC Network’s prime goal has been to develop three sets of discipline-specific TLOs – one each for the Journalism, Public Relations, and Media & Communications Studies disciplines. This paper describes the processes of research, consultation, drafting and ongoing revision of the TLO for Journalism. It outlines the processes that the JoMeC Network has taken in developing a preliminary TLO draft to initiate discussion of Public Relations and Media & Communication Studies. The JoMeC Network plans to hand management of further development of these TLOs to scholars within the discipline who will engage with academics and other stakeholders to develop statements that the respective disciplines can embrace and ‘own’.

Learning in and out of university : Aboriginal and Torres Strait Islander students’ conceptions and strategies used to learn

Research suggests that students’ approaches to learning and learning outcomes are closely related to their conceptions of learning. This paper describes a phenomenographically inspired investigation into conceptions of formal learning held by 22 Aboriginal and Torres Strait Islander students from three Australian universities in Queensland; experiences of informal learning, reasons for studying and strategies used to learn were also investigated. The attrition rate for these students in tertiary education is higher than that of any other group of students. It was hoped that information gained may delineate factors that contribute to high attrition rates and therefore inform courses of action that may lead to improved teaching and learning practices for these students. Additionally, success in tertiary education for Aboriginal and Torres Strait Islander students may increase their involvement in mainstream society. Results showed that they view and approach university learning in much the same way as other university students. It was also apparent that, generally, the strategies these students used did not match the conceptions of learning they held. An interesting result was the difference between the conceptions of formal learning and explanations of informal learning

Learning in formal and informal contexts : conceptions and strategies of Aboriginal and Torres Strait Islander university students

Research suggests that students' approaches to learning and hence learning outcomes are closely related to their conceptions of learning. This paper describes an investigation into conceptions of formal learning held by 22 Aboriginal and Torres Strait Islander students from three Australian universities in Queensland; categories of informal learning, reasons for studying and strategies used to learn were also investigated. The attrition rate for these students in tertiary education is higher than that of any other group of students. The main aim of this study was to determine their conceptions of learning in order to provide information that might facilitate instruction more suited to their needs in order to address the high attrition rate. Results showed that these students view and approach university learning in much the same way as other university students. It was also apparent that, for the most part, the strategies these students used did not match the conceptions of learning they held. An interesting result was the difference between the conceptions of formal learning and perceptions of informal learning.

Course evaluation : reconfigurations for learning with learning management systems

The introduction of online delivery platforms such as learning management systems (LMS) in tertiary education has changed the methods and modes of curriculum delivery and communication. While course evaluation methods have also changed from paper-based in-class-administered methods to largely online-administered methods, the data collection instruments have remained unchanged. This paper reports on a small exploratory study of two tertiary-level courses. The study investigated why design of the instruments and methods to administer surveys in the courses are ineffective measures against the intrinsic characteristics of online learning. It reviewed the students' response rates of the conventional evaluations for the courses over an eight-year period. It then compared a newly developed online evaluation and the conventional methods over a two-year period. The results showed the response rates with the new evaluation method increased by more than 80% from the average of the conventional evaluations (below 30%), and the students' written feedback was more detailed and comprehensive than in the conventional evaluations. The study demonstrated the possibility that the LMS-based learning evaluation can be effective and efficient in terms of the quality of students' participation and engagement in their learning, and for an integrated pedagogical approach in an online learning environment.

The future Australian paramedic workforce : a snapshot of undergraduate paramedic students

Objective Describe the demographics of undergraduate paramedic students enrolled at a major Queensland University and explore the potential impact of demographic change in the paramedic workforce of the future. Method A retrospective, descriptive analysis of de-identified, routinely collected administrative data on students enrolled in the paramedic undergraduate degree program at Queensland University of Technology was undertaken for the period 2005-2013. Quantitative data were examined using the Statistical Package for Social Science version 21. Results A total of 914 students had commenced the paramedic degree since 2005, of whom slightly more than a third (33.4%; SD 9.5%) were enrolled in the double degree with nursing beginning from 2009. Half of the student cohort (52.1%;, SD 4.8%) were female, with the majority (82.9%;, SD 3.4) aged under 25 years old. Most (45.2%;, SD 13) of the student admissions were for graduate entry [i.e. prior tertiary education had been completed], while secondary education entry represented 35.9% (SD 14.9%). Conclusion By contrasting the results of our study to the most recent demographic data of the Australian paramedic workforce, a significant difference in the demographic characteristics of the current and future paramedic workforce is noted. Due to these differences, the need for increased flexibility in employment arrangements should be anticipated. This presentation will explore these characteristics and provide a complementary evidence base on which workforce planning within ambulance services can be conducted.

Understanding declining science participation in Australia : a systemic perspective

In this chapter we describe the substantial declines in student participation in senior high school physics, chemistry and biology classes in Australia over the last two decades. We outline some of the explanations commonly offered to account for these declines, focusing on two contrasting positions: first, that they are due to today’s students holding less positive attitudes towards science classes and careers than their predecessors, and second, that the declines are related to policy and structural changes at the upper secondary and tertiary education levels which have affected the relative status of subjects and the dynamics of choice. We describe how the Choosing Science study investigated the extent to which the two hypotheses were supported by empirical evidence, and discuss our findings in the light of a third result from the study concerning the role of self-identity in subject choice. We conclude that the declines in high school science enrolments are most likely related to changes in school and university curriculum options and that within this expanded curriculum marketplace, identity becomes a very important reference point in students’ decisions about whether to take science in the final years of high school.

“Conversations Before the End of Time” : Refuturing Applications of a New Media Praxis

This chapter examines how the methods, outcomes and transformative potentials of my new media arts praxis have been understood by a range of critical commentators from disciplinary perspectives outside of my own ‘home territory’ of media arts. By drawing upon perspectives from Human Computer Interface Design, Engineering, Sustainability Design, Tertiary Education, Communication Design and Public Librarianship I demonstrate how ideas from my arts disciplines have had tangible ‘external’ significance and application.

Creative arts research : a long path to acceptance

The majority of tertiary practice-led creative arts disciplines became part of the Australian university system as a result of the creation of the Unified National System of tertiary education in 1988. Over the past two decades, research has grown as the yardstick by which academic performance in the Australian university sector is recognised and rewarded. Academics in artistic disciplines, who struggled to adapt to a culture and workload expectations different from their previous, predominantly teaching based, employment, continue to see their research under-valued within the established evaluation framework. Despite a late 1990s Australian government funded inquiry, many of the inequities remain. While the Excellence in Research in Australia (ERA) exercise has acknowledged the non-text outputs of artist-academics in its evaluation of 'research outcomes', much of the process remains resolutely framed by measures that work against creative arts researchers.

Integrating ‘role play’ in assessment to strengthen professional conduct and accountability of students : a pilot study

BACKGROUND In a process engineering setting, graduates are frequently allocated reviews of existing operations or required to scope new production processes by their supervisors with a view to improving or expanding on operations and overall productivity. These tasks may be carried out in teams and in consultation with the process engineer’s immediate line manager or a more experienced engineer, such as the Production or Maintenance Manager; ultimately reporting to senior management, which is frequently a non-engineer. Although professional skills development is part of engineering curricula, ‘professional conduct’ and ‘accountability’ required for dealing with peers and superiors in industry is not very well addressed at university. Consequently, upon graduation, many students are, in terms of knowledge and experience in this area, underprepared to work effectively in industry settings. PURPOSE The purpose of this study was to develop and implement a role-play scenario within a core 2nd year process engineering unit, so that students could gain knowledge, skills and experience in different aspects (and nuances) of professional conduct and accountability. DESIGN/METHOD In the role-play scenario, students worked in ‘engineering production teams’ to design a process for an iconic Queensland fruitcake and to present their solution and recommendations (culminating in a poster presentation) to an assessment panel consisting of staff, role-playing as, ‘production and plant managers’. Students were assessed on several areas, including professionalism using a criteria referenced assessment guide by a 3-member cross-disciplinary staff panel consisting of a Business Faculty lecturer, an engineer from industry and the lecturer of the Process Engineering unit. Professional conduct and accountability was gauged through direct questioning by the panel. Feedback was also sought from students on various aspects through a survey questionnaire after the role play activity at the end of semester. RESULTS Overall, the role play was very well performed with students achieving an average score of 79.3/100 (distinction grade). Professional conduct as assessed by panel was on average better than scores given for professional accountability (4.0 compared with 3.6 out of 5). Feedback from students indicated that the learning activities had contributed to their overall understanding of the content and the role of process engineers. Industry involvement was rated very highly as contributing to their learning at 4.8 (on Likert scale from 1 – 5) and the poster presentation was rated at 3.6. CONCLUSIONS This pilot study was successful in implementing a new assessment task for modelling professional conduct and accountability within a 2nd year core unit. This task incorporated a role-play activity and there was evidence to suggest that this and associated learning tasks were successful in broadening students’ understanding and skills in this area required for engineering practice. Following feedback given by students and staff, improvements will be made to the nature of the problem, how it is defined, its assessment, and the approach taken in the role-play scenario when the unit is offered in 2014.