Occupational injury risk among Australian paramedics: An analysis of national data

Objective To identify the occupational risks for Australian paramedics, by describing the rate of injuries and fatalities and comparing those rates with other reports. Design and participants Retrospective descriptive study using data provided by Safe Work Australia for the period 2000–2010. The subjects were paramedics who had been injured in the course of their duties and for whom a claim had been made for workers compensation payments. Main outcome measures Rates of injury calculated from the data provided. Results The risk of serious injury among Australian paramedics was found to be more than seven times higher than the Australian national average. The fatality rate for paramedics was about six times higher than the national average. On average, every 2 years during the study period, one paramedic died and 30 were seriously injured in vehicle crashes. Ten Australian paramedics were seriously injured each year as a result of an assault. The injury rate for paramedics was more than two times higher than the rate for police officers. Conclusions The high rate of occupational injuries and fatalities among paramedics is a serious public health issue. The risk of injury in Australia is similar to that in the United States. While it may be anticipated that injury rates would be higher as a result of the nature of the work and environment of paramedics, further research is necessary to identify and validate the strategies required to minimise the rates of occupational injury for paramedics.

Illicit drug use between an annual key holiday and a control period: Wastewater analysis in a semi-rural, an urban and a vacation area

Introduction and Aims: Holiday periods are potentially a time for increased substance use as social events and private parties are more common. Data on community illicit drug consumption during holiday periods are limited. Besides existing methods for determining drug use, such as population surveys, one emerging method is to measure illicit drugs and/or their metabolites in wastewater samples. This study examined the change in consumption of cannabis, methamphetamine, cocaine and 3,4- methylenedioxymethamphetamine in three different types of areas (an inland semi-rural area, a coastal urban area and a vacation island) with respect to holiday times. Design and Methods: Samples were collected at the inlet of the major wastewater treatment plant in each area during a key annual holiday (i.e. the summer holiday including Christmas and New Year) and control period. Illicit drug residues in the daily composited samples were measured by liquid chromatography coupled with tandem mass spectrometry. Results: Drug use varied substantially among the three areas within each monitoring period as well as between the holiday and control period within each area. Use consistently increased and peaked over New Year particularly for cocaine and 3,4-methylenedioxymethamphetamine whereas cannabis and methamphetamine were relatively less subjected to holiday times in all the areas. Discussion and Conclusions: Wastewater sampling and analysis provides higher spatio-temporal resolution than national surveys and supplements drug epidemiology studies originating primary in metropolitan locations. Such data is essential for policy makers to plan potential intervention strategies associated with these illicit substances in regional areas and other settings besides urban areas in the future.

Using quantitative wastewater analysis to measure daily usage of conventional and emerging illicit drugs at an annual music festival

Introduction and Aims Wastewater analysis provides a non-intrusive way of measuring drug use within a population. We used this approach to determine daily use of conventional illicit drugs [cannabis, cocaine, methamphetamine and 3,4-methylenedioxymethamphetamine (MDMA)] and emerging illicit psychostimulants (benzylpiperazine, mephedrone and methylone) in two consecutive years (2010 and 2011) at an annual music festival. Design and Methods Daily composite wastewater samples, representative of the festival, were collected from the on-site wastewater treatment plant and analysed for drug metabolites. Data over 2 years were compared using Wilcoxon matched-pair test. Data from 2010 festival were compared with data collected at the same time from a nearby urban community using equivalent methods. Results Conventional illicit drugs were detected in all samples whereas emerging illicit psychostimulants were found only on specific days. The estimated per capita consumption of MDMA, cocaine and cannabis was similar between the two festival years. Statistically significant (P < 0.05; Z = −2.0–2.2) decreases were observed in use of methamphetamine and one emerging illicit psychostimulant (benzyl piperazine). Only consumption of MDMA was elevated at the festival compared with the nearby urban community. Discussion and Conclusions Rates of substance use at this festival remained relatively consistent over two monitoring years. Compared with the urban community, drug use among festival goers was only elevated for MDMA, confirming its popularity in music settings. Our study demonstrated that wastewater analysis can objectively capture changes in substance use at a music setting without raising major ethical issues. It would potentially allow effective assessments of drug prevention strategies in such settings in the future.

Estimating daily and diurnal variations of illicit drug use in Hong Kong: A pilot study of using wastewater analysis in an Asian metropolitan city

The measurement of illicit drug metabolites in raw wastewater is increasingly being adopted as an approach to objectively monitor population-level drug use, and is an effective complement to traditional epidemiological methods. As such, it has been widely applied in western countries. In this study, we utilised this approach to assess drug use patterns over nine days during April 2011 in Hong Kong. Raw wastewater samples were collected from the largest wastewater treatment plant serving a community of approximately 3.5 million people and analysed for excreted drug residues including cocaine, ketamine, methamphetamine, 3,4-methylenedioxymethamphetamine (MDMA) and key metabolites using liquid chromatography coupled with tandem mass spectrometry. The overall drug use pattern determined by wastewater analysis was consistent with that have seen amongst people coming into contact with services in relation to substance use; among our target drugs, ketamine (estimated consumption: 1400–1600 mg/day/1000 people) was the predominant drug followed by methamphetamine (180–200 mg/day/1000 people), cocaine (160–180 mg/day/1000 people) and MDMA (not detected). The levels of these drugs were relatively steady throughout the monitoring period. Analysing samples at higher temporal resolution provided data on diurnal variations of drug residue loads. Elevated ratios of cocaine to benzoylecgonine were identified unexpectedly in three samples during the evening and night, providing evidence for potential dumping events of cocaine. This study provides the first application of wastewater analysis to quantitatively evaluate daily drug use in an Asian metropolitan community. Our data reinforces the benefit of wastewater monitoring to health and law enforcement authorities for strategic planning and evaluation of drug intervention strategies.

Measuring drug use patterns in Queensland through wastewater analysis

Estimating the use of illicit drugs in the general community is an important task with ramifications for law enforcement agencies, as well as health portfolios. Australia has four ongoing drug monitoring systems, including the AIC’s DUMA program, the National Drug Strategy Household Survey, the Illicit Drug Reporting System and the Ecstasy and Related Drug Reporting System. The systems vary in methods, but broadly they are reliant upon self-report data and may be subject to selection biases. The present study employed a completely different method. By chemically analysing sewerage water, the study produced daily estimates of consumption of methamphetamine, MDMA and cocaine. Samples were collected in November 2009 and November 2010 from a municipality in Queensland, with an population of over 150,000 people. Estimates were made of the average daily dose and average daily street value per 1,000 people. On the basis of estimated dose and price, the methamphetamine market appeared considerably stronger than either MDMA or cocaine. This paper explains the strengths and weaknesses of wastewater analysis. It considers the potential value of wastewater analysis in measuring net consumption of illicit drugs and the effectiveness of law enforcement agency strategies.

Engaging elementary students in learning science: An analysis of classroom dialogue

Research over a long period of time has continued to demonstrate problems in the teaching of science in school. In addition, declining levels of participation and interest in science and related fields have been reported from many particularly western countries. Among the strategies suggested is the recruitment of professional scientists and technologists either at the graduate level or advanced career level to change career and teach. In this study, we analysed how one beginning middle primary teacher engaged with students to support their science learning by establishing rich classroom discussions. We followed his evolving teaching expertise over three years focussing on his communicative practices informed by socio-cultural theory. His practices exemplified a non-interactive dialogical communicative approach where ideas were readily discussed but were concentrated on the class acquiring acceptable scientific understandings. His focus on the language of science was a significant aspect of his practice and one that emerged from his professional background. The study affirms the theoretical frameworks proposed by Mortimer and Scott (2003) highlighting how dialogue contributes to heightened student interest in science.

A framing analysis on Nepalese media portrayal of disaster events using news frames and PPRR cycle

This study seeks to understand the prevailing status of Nepalese media portrayal of natural disasters and develop a disaster management framework to improve the effectiveness and efficiency of news production through the continuum of prevention, preparedness, response and recovery (PPRR) phases of disaster management. The study is currently under progress. It is being undertaken in three phases. In phase-1, a qualitative content analysis is conducted. The news contents are categorized in frames as proposed in the 'Framing theory' and pre-defined frames. However, researcher has looked at the theories of the Press, linking to social responsibility theory as it is regarded as the major obligation of the media towards the society. Thereafter, the contents are categorized as per PPRR cycle. In Phase-2, based on the findings of content analysis, 12 in-depth interviews with journalists, disaster managers and community leaders are conducted. In phase-3, based on the findings of content analysis and in-depth interviews, a framework for effective media management of disaster are developed using thematic analysis. As the study is currently under progress hence, findings from the pilot study are elucidated. The response phase of disasters is most commonly reported in Nepal. There is relatively low coverage of preparedness and prevention. Furthermore, the responsibility frame in the news is most prevalent following human interest. Economic consequences and conflict frames are also used while reporting and vulnerability assessment has been used as an additional frame. The outcomes of this study are multifaceted: At the micro-level people will be benefited as it will enable a reduction in the loss of human lives and property through effective dissemination of information in news and other mode of media. They will be ‘well prepared for', 'able to prevent', 'respond to' and 'recover from' any natural disasters. At the meso level the media industry will be benefited and have their own 'disaster management model of news production' as an effective disaster reporting tool which will improve in media's editorial judgment and priority. At the macro-level it will assist government and other agencies to develop appropriate policies and strategies for better management of natural disasters.

Organisational driving safety systems analysis: Fleet safety situational issues and system gaps

The identification of safety hazards and risks and their associated control measures provides the foundation for any safety program and essentially determines the scope, content and complexity of an effective occupational health and safety management system. In the case of work-related road safety (WRRS), there is a gap within current knowledge, research and practice regarding the holistic assessment of WRRS safety systems and practice. In order to mitigate this gap, a multi-level process tool for assessing WRRS safety systems was developed from extensive consultation, practice and informed by theoretical models and frameworks. Data collection for the Organisational Driving Safety Systems Analysis (ODSSA) tool utilised a case study methodology and included multiple information sources: such as documents, archival records, interviews, direct observations, participant observations, and physical artefacts. Previous trials and application of the ODSSA has indicated that the tool is applicable to a wide range of organisational fleet environments and settings. This paper reports on the research results and effectiveness of the ODSSA tool to assess WRRS systems across a large organisation that recently underwent considerable organisational change, including amalgamation of multiple organisations. The outcomes of this project identified considerable differences in the degree by which the organisation addressed WRRS across their vehicle fleet operations and provided guidelines for improving organisations’ WRRS systems. The ODSSA tool was pivotal in determining WRRS system deficiencies and provided a platform to inform mitigation and improvement strategies.

Fatigue crack propagation analysis of plaque rupture

Rupture of atheromatous plaque is the major cause of stroke or heart attack. Considering that the cardiovascular system is a classic fatigue environment, plaque rupture was treated as a chronic fatigue crack growth process in this study. Fracture mechanics theory was introduced to describe the stress status at the crack tip and Paris' law was used to calculate the crack growth rate. The effect of anatomical variation of an idealized plaque cross-section model was investigated. The crack initiation was considered to be either at the maximum circumferential stress location or at any other possible locations around the lumen. Although the crack automatically initialized at the maximum circumferential stress location usually propagated faster than others, it was not necessarily the most critical location where the fatigue life reached its minimum. We found that the fatigue life was minimum for cracks initialized in the following three regions: the midcap zone, the shoulder zone, and the backside zone. The anatomical variation has a significant influence on the fatigue life. Either a decrease in cap thickness or an increase in lipid pool size resulted in a significant decrease in fatigue life. Comparing to the previously used stress analysis, this fatigue model provides some possible explanations of plaque rupture at a low stress level in a pulsatile cardiovascular environment, and the method proposed here may be useful for further investigation of the mechanism of plaque rupture based on in vivo patient data.

May the best Tweeter win : The Twitter strategies of key campaign accounts in the 2012 US election

The 2008 US election has been heralded as the first presidential election of the social media era, but took place at a time when social media were still in a state of comparative infancy; so much so that the most important platform was not Facebook or Twitter, but the purpose-built campaign site my.barackobama.com, which became the central vehicle for the most successful electoral fundraising campaign in American history. By 2012, the social media landscape had changed: Facebook and, to a somewhat lesser extent, Twitter are now well-established as the leading social media platforms in the United States, and were used extensively by the campaign organisations of both candidates. As third-party spaces controlled by independent commercial entities, however, their use necessarily differs from that of home-grown, party-controlled sites: from the point of view of the platform itself, a @BarackObama or @MittRomney is technically no different from any other account, except for the very high follower count and an exceptional volume of @mentions. In spite of the significant social media experience which Democrat and Republican campaign strategists had already accumulated during the 2008 campaign, therefore, the translation of such experience to the use of Facebook and Twitter in their 2012 incarnations still required a substantial amount of new work, experimentation, and evaluation. This chapter examines the Twitter strategies of the leading accounts operated by both campaign headquarters: the ‘personal’ candidate accounts @BarackObama and @MittRomney as well as @JoeBiden and @PaulRyanVP, and the campaign accounts @Obama2012 and @TeamRomney. Drawing on datasets which capture all tweets from and at these accounts during the final months of the campaign (from early September 2012 to the immediate aftermath of the election night), we reconstruct the campaigns’ approaches to using Twitter for electioneering from the quantitative and qualitative patterns of their activities, and explore the resonance which these accounts have found with the wider Twitter userbase. A particular focus of our investigation in this context will be on the tweeting styles of these accounts: the mixture of original messages, @replies, and retweets, and the level and nature of engagement with everyday Twitter followers. We will examine whether the accounts chose to respond (by @replying) to the messages of support or criticism which were directed at them, whether they retweeted any such messages (and whether there was any preferential retweeting of influential or – alternatively – demonstratively ordinary users), and/or whether they were used mainly to broadcast and disseminate prepared campaign messages. Our analysis will highlight any significant differences between the accounts we examine, trace changes in style over the course of the final campaign months, and correlate such stylistic differences with the respective electoral positioning of the candidates. Further, we examine the use of these accounts during moments of heightened attention (such as the presidential and vice-presidential debates, or in the context of controversies such as that caused by the publication of the Romney “47%” video; additional case studies may emerge over the remainder of the campaign) to explore how they were used to present or defend key talking points, and exploit or avert damage from campaign gaffes. A complementary analysis of the messages directed at the campaign accounts (in the form of @replies or retweets) will also provide further evidence for the extent to which these talking points were picked up and disseminated by the wider Twitter population. Finally, we also explore the use of external materials (links to articles, images, videos, and other content on the campaign sites themselves, in the mainstream media, or on other platforms) by the campaign accounts, and the resonance which these materials had with the wider follower base of these accounts. This provides an indication of the integration of Twitter into the overall campaigning process, by highlighting how the platform was used as a means of encouraging the viral spread of campaign propaganda (such as advertising materials) or of directing user attention towards favourable media coverage. By building on comprehensive, large datasets of Twitter activity (as of early October, our combined datasets comprise some 3.8 million tweets) which we process and analyse using custom-designed social media analytics tools, and by using our initial quantitative analysis to guide further qualitative evaluation of Twitter activity around these campaign accounts, we are able to provide an in-depth picture of the use of Twitter in political campaigning during the 2012 US election which will provide detailed new insights social media use in contemporary elections. This analysis will then also be able to serve as a touchstone for the analysis of social media use in subsequent elections, in the USA as well as in other developed nations where Twitter and other social media platforms are utilised in electioneering.

Comparative analysis of traffic state estimation ─ Cumulative counts-based and trajectory-based methods

The Macroscopic Fundamental Diagram (MFD) relates space-mean density and flow. Since the MFD represents the area-wide network traffic performance, studies on perimeter control strategies and network-wide traffic state estimation utilising the MFD concept have been reported. Most previous works have utilised data from fixed sensors, such as inductive loops, to estimate the MFD, which can cause biased estimation in urban networks due to queue spillovers at intersections. To overcome the limitation, recent literature reports the use of trajectory data obtained from probe vehicles. However, these studies have been conducted using simulated datasets; limited works have discussed the limitations of real datasets and their impact on the variable estimation. This study compares two methods for estimating traffic state variables of signalised arterial sections: a method based on cumulative vehicle counts (CUPRITE), and one based on vehicles’ trajectory from taxi Global Positioning System (GPS) log. The comparisons reveal some characteristics of taxi trajectory data available in Brisbane, Australia. The current trajectory data have limitations in quantity (i.e., the penetration rate), due to which the traffic state variables tend to be underestimated. Nevertheless, the trajectory-based method successfully captures the features of traffic states, which suggests that the trajectories from taxis can be a good estimator for the network-wide traffic states.

Efficient regression analysis with ranked-set sampling

This article is motivated by a lung cancer study where a regression model is involved and the response variable is too expensive to measure but the predictor variable can be measured easily with relatively negligible cost. This situation occurs quite often in medical studies, quantitative genetics, and ecological and environmental studies. In this article, by using the idea of ranked-set sampling (RSS), we develop sampling strategies that can reduce cost and increase efficiency of the regression analysis for the above-mentioned situation. The developed method is applied retrospectively to a lung cancer study. In the lung cancer study, the interest is to investigate the association between smoking status and three biomarkers: polyphenol DNA adducts, micronuclei, and sister chromatic exchanges. Optimal sampling schemes with different optimality criteria such as A-, D-, and integrated mean square error (IMSE)-optimality are considered in the application. With set size 10 in RSS, the improvement of the optimal schemes over simple random sampling (SRS) is great. For instance, by using the optimal scheme with IMSE-optimality, the IMSEs of the estimated regression functions for the three biomarkers are reduced to about half of those incurred by using SRS.

Hip power analysis in individuals with transfemoral amputation: A different strategy different from stabilisation during gait stance

Introduction and Objectives Joint moments and joint powers during gait are widely used to determine the effects of rehabilitation programs as well as prosthetic fitting. Following the definition of power (dot product of joint moment and joint angular velocity) it has been previously proposed to analyse the 3D angle between both vectors, αMw. Basically, joint power is maximised when both vectors are parallel and cancelled when both vectors are orthogonal. In other words, αMw < 60° reveals a propulsion configuration (more than 50% of the moment contribute to positive power) while αMw > 120° reveals a resistance configuration (more than 50% of the moment contribute to negative power). A stabilisation configuration (less than 50% of the moment contribute to power) corresponds to 60° < αMw < 120°. Previous studies demonstrated that hip joints of able-bodied adults (AB) are mainly in a stabilisation configuration (αMw about 90°) during the stance phase of gait. [1, 2] Individuals with transfemoral amputation (TFA) need to maximise joint power at the hip while controlling the prosthetic knee during stance. Therefore, we tested the hypothesis that TFAs should adopt a strategy that is different from a continuous stabilisation. The objective of this study was to compute joint power and αMw for TFA and to compare them with AB. Methods Three trials of walking at self-selected speed were analysed for 8 TFAs (7 males and 1 female, 46±10 years old, 1.78±0.08 m 82±13 kg) and 8 ABs (males, 25±3 years old, 1.75±0.04, m 67±6 kg). The joint moments are computed from a motion analysis system (Qualisys, Goteborg, Sweden) and a multi-axial transducer (JR3, Woodland, USA) mounted above the prosthetic knee for TFAs and from a motion analysis system (Motion Analysis, Santa Rosa, USA) and force plates (Bertec, Columbus, USA) for ABs. The TFAs were fitted with an OPRA (Integrum, AB, Gothengurg, Sweden) osseointegrated implant system and their prosthetic designs include pneumatic, hydraulic and microprocessor knees. Previous studies showed that the inverse dynamics computed from the multi-axial transducer is the proper method considering the absorption at the foot and resistance at the knee. Results The peak of positive power at loading response (H1) was earlier and lower for TFA compared to AB. Although the joint power is lower, the 3D angle between joint moment and joint angular velocity, αMw, reveals an obvious propulsion configuration (mean αMw about 20°) for TFA compared to a stabilisation configuration (mean αMw about 70°) for AB. The peaks of negative power at midstance (H2) and of positive power at preswing / initial swing (H3) occurred later, lower and longer for TFA compared to AB. Again, the joint powers are lower for TFA but, in this case, αMw is almost comparable (with a time lag), demonstrating a stabilisation (almost a resistance for TFA, mean αMw about 120°) and a propulsion configuration, respectively. The swing phase is not analysed in the present study. Conclusion The analysis of hip joint power may indicate that TFAs demonstrated less propulsion and resistance than ABs during the stance phase of gait. This is true from a quantitative point of view. On the contrary, the 3D angle between joint moment and joint angular velocity, αMw, reveals that TFAs have a remarkable propulsion strategy at loading response and almost a resistance strategy at midstance while ABs adopted a stabilisation strategy. The propulsion configuration, with αMw close to 0°, seems to aim at maximising the positive joint power. The configuration close to resistance, with αMw far from 180°, might aim at unlocking the prosthetic knee before swing while minimising the negative power. This analysis of both joint power and 3D angle between the joint moment and the joint angular velocity provides complementary insights into the gait strategies of TFA that can be used to support evidence-based rehabilitation and fitting of prosthetic components.

WinBUGS code to run a network meta-analysis

WinBUGS code and data to reproduce our network meta-analysis from "Control strategies to prevent total hip replacement-related infections: a systematic review and mixed treatment comparison" published in BMJ Open.

A descriptive analysis of incidents reported by community aged care workers

Little is known about the types of incidents that occur to aged care clients in the community. This limits the development of effective strategies to improve client safety. The objective of the study was to present a profile of incidents reported in Australian community aged care settings. All incident reports made by community care workers employed by one of the largest community aged care provider organizations in Australia during the period November 1, 2012, to August 8, 2013, were analyzed. A total of 356 reports were analyzed, corresponding to a 7.5% incidence rate per client year. Falls and medication incidents were the most prevalent incident types. Clients receiving high-level care and those who attended day therapy centers had the highest rate of incidents with 14% to 20% of these clients having a reported incident. The incident profile indicates that clients on higher levels of care had higher incident rates. Incident data represent an opportunity to improve client safety in community aged care.