Flight-training effect on the cervical muscle isometric strength of trainee pilots

External stimulus/loading initiates adaptations within skeletal muscle. It has been previously found that the cervical area has the highest loading while performing flying maneuvers under +Gz. The first purpose of this study was to examine the neck muscle response to the physical environment associated with flight training, incorporating limited exposure to +Gz force, in a Pilatus PC-9 aircraft. The second purpose was to examine the short-term range of movement (ROM) response to flight training. Isometric cervical muscle strength and ROM was monitored in 9 RAAF pilots completing an 8-mo flight-training course at Pearce Airbase in Western Australia, and in 10 controls matched for gender, age, height, and weight. Isometric cervical muscle strength and ROM were measured at baseline and at 8 mo using the multi-cervical rehabilitation unit (Hanoun Medical, Downsview, Ontario, Canada). Results indicated that an increase in pilot neck strength was limited to flexion while in a neutral position. No strength changes were recorded in any other site in the pilots or for the controls. These findings suggest that short-term exposure to the physical environment associated with flight training had a limited significant effect on increasing isometric cervical muscle strength. No significant changes were observed in pilot ROM, indicating that short-term exposure to flight does not effect ROM.

Privacy, modesty, hospitality and the design of Muslim homes in Australia

The home environment is conceptualised in prolific ways within the academic literature. A home is an unparalleled base for human settlement and habitation that embodies a sensorial space that is layered with personal memories and traces of history. The success of a home in providing a strong ‘sense of place’ depends on various factors such as geographical location, monetary funds or personal perceptions. A home too, is an influential medium that allows its dwellers to express, perform and continue their cultural traditions and religious faiths. Traditional Islamic teachings and practices involve guidelines that apply directly to the domestic space. The principles of privacy, modesty and hospitality are paramount to these guidelines and each has a significant influence upon the design of Muslim homes and the home owners’ or dwellers’ domestic behaviours. Despite a significant increase of Muslim population in Australia over the last decade, very little is known about their perceptions of domestic life and their use of domestic spaces within an Australian context. This research investigated on how Muslims in Brisbane live and adapt within their Australian homes and if these homes meet their personal and familial needs to perform their daily activities, as well as maintaining and practising their Islamic faiths and traditions. Specific attention has been given to their perceptions on tripartite principles of privacy, modesty, and hospitality (PMH) and how they achieve these three objectives. A qualitative case study approach was used to investigate six Muslim families living in four Brisbane suburbs, consisting of: a) Case Study 1: three Muslim families residing in one suburb of Brisbane and, b) Case Study 2: three international Muslim students living in three different Brisbane suburbs. This research indicates that apart from minor ‘design-related’ difficulties, case study participants were able to continue to perform their daily activities within their current homes through minor changes to the use of the available interior spaces. Above all, case study participants opined that their current Australian homes provide them with adequate safety and privacy for their families without any major disturbances. Insight gained from these cases suggests that greater research attention needs to be given to the potential development of Australian home designs that are adaptable to the ever-changing needs of the Australian multicultural society. Awareness of the multifactorial nature of the influences on Muslims’ perceptions of home and their use of domestic space is needed if architects, building designers, engineers and builders are to be properly equipped to meet the needs of their Muslim clients.

Space Station Design Report 2007

Design Proposal for the Blue Lunar Support Hub The conceptual design of a space station is one of the most challenging tasks in aerospace engineering. The history of the space station Mir and the assembly of the International Space Station demonstrate that even within the assembly phase quick solutions have to be found to cope with budget and technical problems or changing objectives. This report is the outcome of the conceptual design of the Space Station Design Workshop (SSDW) 2007, which took place as an international design project from the 16th to the 21st of July 2007 at the Australian Centre for Field Robotics (ACFR), University of Sydney, Australia. The participants were tasked to design a human-tended space station in low lunar orbit (LLO) focusing on supporting future missions to the moon in a programmatic context of space exploration beyond low Earth orbit (LEO). The design included incorporating elements from systems engineering to interior architecture. The customised, intuitive, rapid-turnaround software tools enabled the team to successfully tackle the complex problem of conceptual design of crewed space systems. A strong emphasis was put on improving the integration of the human crew, as it is the major contributor to mission success, while always respecting the boundary conditions imposed by the challenging environment of space. This report documents the methodology, tools and outcomes of the Space Station Design Workshop during the SSDW 2007. The design results produced by Team Blue are presented.

Social networking sites and participatory reluctance: A case study of Gaydar, user resistance and interface rejection

This article conceptualises ‘participatory reluctance’ as a particular orientation to social media that problematises binarised notions of connection and disconnection in social networking sites. It qualitatively examines how the concept has functioned within gay men’s social networking service, Gaydar, among 18- to 28-year-old users of the site in Brisbane, Australia. Participatory reluctance is shown to be a central aspect of the culture of this space, fostered among the studied demographic by the convergence of the growing global push for marriage equality and increasing normalisation of the kinds of gay male identities commonly adopted among this group, with three key factors rooted primarily in Gaydar’s design: (1) young users’ perceptions of the site as a space for procuring casual sex; (2) their perceptions of the imagined user as embodying existing stereotypes of gay masculinity, and; (3) a lack of genuine alternatives in terms of niche digital spaces for gay men’s social networking.

The links between public tendencies and the urban design framework of Brisbane’s public squares: Mapping urban design frameworks present in Brisbane public squares and the correlating activities of the Australian public

This research seeks to demonstrate the ways in which urban design factors, individually and in various well-considered arrangements, stimulate and encourage social activities in Brisbane’s public squares through the mapping and analysis of user behaviour. No design factors contribute to public space in isolation, so the combinations of different design factors, contextual and social impacts as well as local climate are considered to be highly influential to the way in which Brisbane’s public engages with public space. It is this local distinctiveness that this research seeks to ascertain. The research firstly pinpoints and consolidates the design factors identified and recommended in existing literature and then maps the identified factors as they are observed at case study sites in Brisbane. This is then set against observational mappings of the site’s corresponding user activities and engagement. These mappings identify a number of patterns of behaviour; pertinently that “activated” areas of social gathering actively draw people in, and the busier a space is, both the frequency and duration of people lingering in the space increases. The study finds that simply providing respite from the urban environment (and/or weather conditions) does not adequately encourage social interaction and that people friendly design factors can instigate social activities which, if coexisting in a public space, can themselves draw in further users of the space. One of the primary conclusions drawn from these observations is that members of the public in Brisbane are both actively and passively social and often seek out locations where “people-watching” and being around other members of the public (both categorised as passive social activities) are facilitated and encouraged. Spaces that provide respite from the urban environment but that do not sufficiently accommodate social connections and activities are less favourable and are often left abandoned despite their comparable tranquillity and available space.

Unique and cross-reactive T cell epitope peptides of the major bahia grass pollen allergen, pas n 1

Background Bahia grass pollen (BaGP) is a major cause of allergic rhinitis. Subcutaneous allergen-specific immunotherapy is effective for grass pollen allergy, but is unsuitable for patients with moderate to severe asthma due to the risk of anaphylaxis. T cell-reactive but IgE nonreactive peptides provide a safer treatment option. This study aimed to identify and characterize dominant CD4+ T cell epitope peptides of the major BaGP allergen, Pas n 1. Methods Pas n 1-specific T cell lines generated from the peripheral blood of BaGP-allergic subjects were tested for proliferative and cytokine response to overlapping 20-mer Pas n 1 peptides. Cross-reactivity to homologous peptides from Lol p 1 and Cyn d 1 of Ryegrass and Bermuda grass pollen, respectively, was assessed using Pas n 1 peptide-specific T cell clones. MHC class II restriction of Pas n 1 peptide T cell recognition was determined by HLA blocking assays and peptide IgE reactivity tested by dot blotting. Results Three Pas n 1 peptides showed dominant T cell reactivity; 15 of 18 (83%) patients responded to one or more of these peptides. T cell clones specific for dominant Pas n 1 peptides showed evidence of species-specific T cell reactivity as well as cross-reactivity with other group 1 grass pollen allergens. The dominant Pas n 1 T cell epitope peptides showed HLA binding diversity and were non-IgE reactive. Conclusions The immunodominant T cell-reactive Pas n 1 peptides are candidates for safe immunotherapy for individuals, including those with asthma, who are allergic to Bahia and possibly other grass pollens.

Combining transcriptome assemblies from multiple de novo assemblers in the allo-tetraploid plant Nicotiana benthamiana

Background Nicotiana benthamiana is an allo-tetraploid plant, which can be challenging for de novo transcriptome assemblies due to homeologous and duplicated gene copies. Transcripts generated from such genes can be distinct yet highly similar in sequence, with markedly differing expression levels. This can lead to unassembled, partially assembled or mis-assembled contigs. Due to the different properties of de novo assemblers, no one assembler with any one given parameter space can re-assemble all possible transcripts from a transcriptome. Results In an effort to maximise the diversity and completeness of de novo assembled transcripts, we utilised four de novo transcriptome assemblers, TransAbyss, Trinity, SOAPdenovo-Trans, and Oases, using a range of k-mer sizes and different input RNA-seq read counts. We complemented the parameter space biologically by using RNA from 10 plant tissues. We then combined the output of all assemblies into a large super-set of sequences. Using a method from the EvidentialGene pipeline, the combined assembly was reduced from 9.9 million de novo assembled transcripts to about 235,000 of which about 50,000 were classified as primary. Metrics such as average bit-scores, feature response curves and the ability to distinguish paralogous or homeologous transcripts, indicated that the EvidentialGene processed assembly was of high quality. Of 35 RNA silencing gene transcripts, 34 were identified as assembled to full length, whereas in a previous assembly using only one assembler, 9 of these were partially assembled. Conclusions To achieve a high quality transcriptome, it is advantageous to implement and combine the output from as many different de novo assemblers as possible. We have in essence taking the ‘best’ output from each assembler while minimising sequence redundancy. We have also shown that simultaneous assessment of a variety of metrics, not just focused on contig length, is necessary to gauge the quality of assemblies.

A compliant, banded outflow cannula for decreased afterload sensitivity of rotary right ventricular assist devices

Biventricular support with dual rotary ventricular assist devices (VADs) has been implemented clinically with restriction of the right VAD (RVAD) outflow cannula to artificially increase afterload and, therefore, operate within recommended design speed ranges. However, the low preload and high afterload sensitivity of these devices increase the susceptibility of suction events. Active control systems are prone to sensor drift or inaccurate inferred (sensor-less) data, therefore an alternative solution may be of benefit. This study presents the in vitro evaluation of a compliant outflow cannula designed to passively decrease the afterload sensitivity of rotary RVADs and minimize left-sided suction events. A one-way fluid-structure interaction model was initially used to produce a design with suitable flow dynamics and radial deformation. The resultant geometry was cast with different initial cross-sectional restrictions and concentrations of a softening diluent before evaluation in a mock circulation loop. Pulmonary vascular resistance (PVR) was increased from 50 dyne s/cm5 until left-sided suction events occurred with each compliant cannula and a rigid, 4.5 mm diameter outflow cannula for comparison. Early suction events (PVR ∼ 300 dyne s/cm5) were observed with the rigid outflow cannula. Addition of the compliant section with an initial 3 mm diameter restriction and 10% diluent expanded the outflow restriction as PVR increased, thus increasing RVAD flow rate and preventing left-sided suction events at PVR levels beyond 1000 dyne s/cm5. Therefore, the compliant, restricted outflow cannula provided a passive control system to assist in the prevention of suction events with rotary biventricular support while maintaining pump speeds within normal ranges of operation.

Histopathological features of bone regeneration in a canine segmental ulnar defect model

Background Today, finding an ideal biomaterial to treat the large bone defects, delayed unions and non-unions remains a challenge for orthopaedic surgeions and researchers. Several studies have been carried out on the subject of bone regeneration, each having its own advantages. The present study has been designed in vivo to evaluate the effects of cellular auto-transplantation of tail vertebrae on healing of experimental critical bone defect in a dog model. Methods Six indigenous breeds of dog with 32 ± 3.6 kg average weight from both sexes (5 males and 1 female) received bilateral critical-sized ulnar segmental defects. After determining the health condition, divided to 2 groups: The Group I were kept as control I (n = 1) while in Group II (experimental group; n = 5) bioactive bone implants were inserted. The defects were implanted with either autogeneic coccygeal bone grafts in dogs with 3-4 cm diaphyseal defects in the ulna. Defects were stabilized with internal plate fixation, and the control defects were not stabilized. Animals were euthanized at 16 weeks and analyzed by histopathology. Results Histological evaluation of this new bone at sixteen weeks postoperatively revealed primarily lamellar bone, with the formation of new cortices and normal-appearing marrow elements. And also reformation cortical compartment and reconstitution of marrow space were observed at the graft-host interface together with graft resorption and necrosis responses. Finally, our data were consistent with the osteoconducting function of the tail autograft. Conclusions Our results suggested that the tail vertebrae autograft seemed to be a new source of autogenous cortical bone in order to supporting segmental long bone defects in dogs. Furthermore, cellular autotransplantation was found to be a successful replacement for the tail vertebrae allograft bone at 3-4 cm segmental defects in the canine mid- ulna. Clinical application using graft expanders or bone autotransplantation should be used carefully and requires further investigation.

Young people and urban public space in Australia-creating pathways to community, belonging and inclusion

Cities and urban spaces around the world are changing rapidly from their origins in the industrialising world to a post-industrial, hard wired surveillance landscape. This kind of monitoring and surveillance connects with attempts by civic authorities to rebrand urban public spaces into governable and predictable arenas of consumption. In this context of control, a number of groups are excluded from public space, such as some children and young people. This article discusses the surveillance, governance and control of public space environments used by children and young people in particular, and the capacity for their ongoing displacement and marginality, as well as possible greater inclusion.

Time, place and space – student group collaboration using Google Drive

Virtual working environments are intrinsic to the contemporary workplace and collaborative skills are a vital graduate capability. To develop students’ collaborative skills, first year medical laboratory science students undertake a group poster project, based on a blended learning model. Learning is scaffolded in lectures, workshops in collaborative learning spaces, practitioner mentoring sessions, and online resources. Google Drive provides an online collaborative space for students to realise tangible outcomes from this learning. A Google Drive document is created for each group and shared with members. In this space, students assign tasks and plan workflow, share research, progressively develop poster content, reflect and comment on peer contributions and use the messaging functions to ‘talk’ to group members. This provides a readily accessible, transparent record of group work, crucial in peer assessment, and a communication channel for group members and the lecturer, who can support groups if required. This knowledge creation space also augments productivity and effectiveness of face-to-face collaboration. As members are randomly allocated to groups and are often of diverse backgrounds and unknown to each other, resilience is built as students navigate the uncertainties and complexities of group dynamics, learning to focus on the goal of the team task as they constructively and professionally engage in team dialogue. Students are responsible and accountable for individual and group work. The use of Google Drive was evaluated in a survey including Likert scale and open ended qualitative questions. Statistical analysis was carried out. Results show students (79%) valued the inclusion of online space in collaborative work and highly appreciated (78%) the flexibility provided by Google Drive, while recognising the need for improved notification functionality. Teaching staff recognised the advantages in monitoring and moderating collaborative group work, and the transformational progression in student collaborative as well as technological skill acquisition, including professional dialogue.

Ideologies and their points of view

It is well known that different arguments appeal to different people. We all process information in ways that are adapted to be consistent with our underlying ideologies. These ideologies can sometimes be framed in terms of particular axes or dimensions, which makes it possible to represent some aspects of an ideology as a region in the kind of vector space that is typical of many generalised quantum models. Such models can then be used to explain and predict, in broad strokes, whether a particular argument or proposal is likely to appeal to an individual with a particular ideology. The choice of suitable arguments to bring about desired actions is traditionally part of the art or science of rhetoric, and today's highly polarised society means that this skill is becoming more important than ever. This paper presents a basic model for understanding how different goals will appeal to people with different ideologies, and thus how different rhetorical positions can be adopted to promote the same desired outcome. As an example, we consider different narratives and hence actions with respect to the environment and climate change, an important but currently highly controversial topic.

The ultimate edge: The case for planning media for sustaining space communities

Governments and intergovernmental organisations have long recognised that space communities – the ultimate ‘settlements at the edge’ – will exist one day and have based their first plans for these on another region ‘at the edge’, the Antarctic. United States President Eisenhower proposed to the United Nations in 1960 that the principles of the Antarctic Treaty be applied to outer space and celestial bodies (State Department, n.d.). Three years later the UN adopted the Declaration of Legal Principles Governing the Activities of States in the Exploration and Use of Outer Space and in 1967 that became the Outer Space Treaty. According to the UN Office for Outer Space Affairs, ‘the Treaty was opened for signature by the three depository Governments (the Russian Federation, the United Kingdom and the United States of America) in January 1967, and it entered into force in October 1967’ (Office for Outer Space Affairs, n.d). The status of the treaty (at time of writing) was 89 signatories and 102 parties (Office for Disarmament Affairs, n.d.). Other related instruments include the Rescue Agreement, the Liability Convention, the Registration Convention and the Moon Agreement (Office for Outer Space Affairs, n.d.-a). Jumping to the present, a newsagency reported in July 2014 (Reuters, 2014) that the British Government had shortlisted eight aerodromes in its search for a potential base for the UK’s first spaceplane flights which Ministers want to happen by 2018 (UK Space Agency, 2014). The United States already has a spaceport, in New Mexico (Cokley, Rankin, Heinrich, & McAuliffe, 2013)...

Sampling Methods for Exploring Between Subject Variability in Cardiac Electrophysiology Experiments

Between-subject and within-subject variability is ubiquitous in biology and physiology and understanding and dealing with this is one of the biggest challenges in medicine. At the same time it is difficult to investigate this variability by experiments alone. A recent modelling and simulation approach, known as population of models (POM), allows this exploration to take place by building a mathematical model consisting of multiple parameter sets calibrated against experimental data. However, finding such sets within a high-dimensional parameter space of complex electrophysiological models is computationally challenging. By placing the POM approach within a statistical framework, we develop a novel and efficient algorithm based on sequential Monte Carlo (SMC). We compare the SMC approach with Latin hypercube sampling (LHS), a method commonly adopted in the literature for obtaining the POM, in terms of efficiency and output variability in the presence of a drug block through an in-depth investigation via the Beeler-Reuter cardiac electrophysiological model. We show improved efficiency via SMC and that it produces similar responses to LHS when making out-of-sample predictions in the presence of a simulated drug block.

Future learning landscapes for architectural education: Linking space, place, pedagogy, technology + context

Diversification and expansion of global higher education in the 21st century, has resulted in Learning Landscapes for architectural education that can no longer be sustained by the traditional model. Changes have resulted because of surging student numbers, extensions to traditional curricula, evolving competency standards and accreditation requirements, and modified geographical and pedagogical boundaries. The influx of available new technology has helped to democratise knowledge, transforming when, where and how learning takes place. Pressures on government funded higher education budgets highlight the need for a critical review of the current approach to the design and use of learning environments. Efficient design of physical space contributes significantly to savings in provision, management and use of facilities, while also potentially improving pedagogical quality. The purpose of this research is to identify emerging trends in the design of future Learning Landscapes for architectural education in Australasia; to understand where and how students of architecture are likely to learn, in the future context. It explores the important linkages between space, place, pedagogy, technology and context, using a multi methodological qualitative research approach. An Australasian context study will explore the Learning Landscapes of 23 Schools of Architecture across Australia, New Zealand and Papua New Guinea. The focus of this paper is on the methodology which is being employed to undertake dynamic data collection for the study. The research will be determined through mapping all forms of architectural learning environments, pedagogical approaches and contextual issues, to bridge the gap between academic theory, and architectural design practice. An initial understanding that pedagogy is an intrinsic component imbedded within the design of learning environments, will play an important role. Active learning environments which are exemplified by the architectural design studio, support dynamic project based and collaborative connected learning models. These have recently become a lot more common in disciplines outside of design and the arts. It is anticipated, therefore, that the implications for this research may well have a positive impact far beyond the confines of the architectural studio learning environment.