Numerical investigation of upstream fuel injection through porous media for scramjet engines via surrogate-assisted evolutionary algorithms

A multi-objective design optimization study has been conducted for upstream fuel injection through porous media applied to the first ramp of a two-dimensional scramjet intake. The optimization has been performed by coupling evolutionary algorithms assisted by surrogate modeling and computational fluid dynamics with respect to three design criteria, that is, the maximization of the absolute mixing quantity, total pressure saving, and fuel penetration. A distinct Pareto optimal front has been obtained, highlighting the counteracting behavior of the total pressure against the mixing efficiency and fuel penetration. The injector location and size have been identified as the key design parameters as a result of a sensitivity analysis, with negligible influence of the porous properties in the configurations and conditions considered in the present study. Flowfield visualization has revealed the underlying physics associated with the effects of these dominant parameters on the shock structure and intensity.

The competitive market for assurance engagements on greenhouse gas statements : is there a role for assurers from the accounting profession?

In response to current and increasing demand for assurance on greenhouse gas statements, the International Auditing and Assurance Standards Board (IAASB) released an exposure draft of a new assurance standard, ISAE 3410 'Assurance on a Greenhouse Gas Statement' (IFAC 2011), to provide comprehensive guidance on these types of greenhouse gas (GHG) assurance engagements. Internationally, approximately 50 percent of GHG statements are independently assured. The related assurance market is competitive, with the accounting profession and those outside the profession currently holding approximately equal shares. This paper highlights the characteristics of GHG assurance engagements that warrant multi-disciplinary teamwork, the unique and interdependent skill-sets that different practitioners bring to these engagements, and the market forces that create a demand for diverse providers.

Open access spatial data and collaboration

On 19 June 2015, representatives from over 40 Australian research institutions gathered in Canberra to launch their Open Data Collections. The one day event, hosted by the Australian National Data Service (ANDS), showcased to government and a range of national stakeholders the rich variety of data collections that have been generated through the Major Open Data Collections (MODC) project. Colin Eustace attended the showcase for QUT Library and presented a poster that reflected the work that he and Jodie Vaughan generated through the project. QUT’s Blueprint 4, the University’s five-year institutional strategic plan, outlines the key priorities of developing a commitment to working in partnership with industry, as well as combining disciplinary strengths with interdisciplinary application. The Division of Technology, Information and Learning Support (TILS) has undertaken a number of Australian National Data Service (ANDS) funded projects since 2009 with the aim of developing improved research data management services within the University to support these strategic aims. By leveraging existing tools and systems developed during these projects, the Major Open Data Collection (MODC) project delivered support to multi-disciplinary collaborative research activities through partnership building between QUT researchers and Queensland government agencies, in order to add to and promote the discovery and reuse of a collection of spatially referenced datasets. The MODC project built upon existing Research Data Finder infrastructure (which uses VIVO open source software, developed by Cornell University) to develop a separate collection, Spatial Data Finder (https://researchdatafinder.qut.edu.au/spatial) as the interface to display the spatial data collection. During the course of the project, 62 dataset descriptions were added to Spatial Data Finder, 7 added to Research Data Finder and two added to Software Finder, another separate collection. The project team met with 116 individual researchers and attended 13 school and faculty meetings to promote the MODC project and raise awareness of the Library’s services and resources for research data management.

Monitoring care processes in the gynecologic oncology department

The care processes of healthcare providers are typically considered as human-centric, flexible, evolving, complex and multi-disciplinary. Consequently, acquiring an insight in the dynamics of these care processes can be an arduous task. A novel event log based approach for extracting valuable medical and organizational information on past executions of the care processes is presented in this study. Care processes are analyzed with the help of a preferential set of process mining techniques in order to discover recurring patterns, analyze and characterize process variants and identify adverse medical events.

The Role of the Law in Communicating Patient Safety

This chapter considers the role of the law in communicating patient safety. Downie, Lahey, Ford, et al’s (2006) preventing, knowing and responding theoretical framework is adopted to classify the different elements of patient safety law. Rather than setting out all relevant patient safety laws in detail, this chapter highlights key legal strategies which are employed to: prevent the occurrence of patient safety incidents (preventing); support the discovery and open discussion of patient safety incidents when they do occur (knowing),; and guide responses after they occur (responding) (Downie, Lahey, Ford, et al 2006). The law is increasingly being invoked to facilitate open discussion of and communication surrounding patient safety. After highlighting some legal strategies used to communicate patient safety, two practice examples are presented. The practice examples highlight different aspects of patient safety law and are indicative of communication issues commonly faced in practice. The first practice example focuses on the role of the Ccoroner in communicating patient safety. This example highlights the investigative role of the law in relation to patient safety (knowing). It also showcases the preventing responding and preventing elements in respect of the significant number of communication errors that can occur in a multi-disciplinary, networked health system. The main focus of the second practice example is responding example illustrates how the law responds to health service providers’ and professionals’ miscommunication (and subsequent incidents) during treatment, however it also touches upon knowing and preventing.

Promoting articulated action from diverse stakeholders in response to public policy scenarios: A case analysis of the use of ‘scenario improvisation’ method

In this paper we present a novel application of scenario methods to engage a diverse constituency of senior stakeholders, with limited time availability, in debate to inform planning and policy development. Our case study project explores post-carbon futures for the Latrobe Valley region of the Australian state of Victoria. Our approach involved initial deductive development of two ‘extreme scenarios’ by a multi-disciplinary research team, based upon an extensive research programme. Over four workshops with the stakeholder constituency, these initial scenarios were discussed, challenged, refined and expanded through an inductive process, whereby participants took ‘ownership’ of a final set of three scenarios. These were both comfortable and challenging to them. The outcomes of this process subsequently informed public policy development for the region. Whilst this process did not follow a single extant structured, multi-stage scenario approach, neither was it devoid of form. Here, we seek to theorise and codify elements of our process – which we term ‘scenario improvisation’ – such that others may adopt it.

How do Australian podiatrists manage patients with diabetes The Australian diabetic foot management survey

Background Diabetic foot complications are the leading cause of lower extremity amputation and diabetes-related hospitalisation in Australia. Studies demonstrate significant reductions in amputations and hospitalisation when health professionals implement best practice management. Whilst other nations have surveyed health professionals on specific diabetic foot management, to the best of the authors’ knowledge this appears not to have occurred in Australia. The primary aim of this study was to examine Australian podiatrists’ diabetic foot management compared with best practice recommendations by the Australian National Health Medical Research Council. Methods A 36-item Australian Diabetic Foot Management survey, employing seven-point Likert scales (0 = Never; 7 = Always) to measure multiple aspects of best practice diabetic foot management was developed. The survey was briefly tested for face and content validity. The survey was electronically distributed to Australian podiatrists via professional associations. Demographics including sex, years treating patients with diabetes, employment-sector and patient numbers were also collected. Chi-squared and Mann Whitney U tests were used to test differences between sub-groups. Results Three hundred and eleven podiatrists responded; 222 (71%) were female, 158 (51%) from the public sector and 11–15 years median experience. Participants reported treating a median of 21–30 diabetes patients each week, including 1–5 with foot ulcers. Overall, participants registered median scores of at least “very often” (>6) in their use of most items covering best practice diabetic foot management. Notable exceptions were: “never” (1 (1 – 3)) using total contact casting, “sometimes” (4 (2 – 5)) performing an ankle brachial index, “sometimes” (4 (1 – 6)) using University of Texas Wound Classification System, and “sometimes” (4 (3 – 6) referring to specialist multi-disciplinary foot teams. Public sector podiatrists reported higher use or access on all those items compared to private sector podiatrists (p < 0.01). Conclusions This study provides the first baseline information on Australian podiatrists’ adherence to best practice diabetic foot guidelines. It appears podiatrists manage large caseloads of people with diabetes and are generally implementing best practice guidelines recommendations with some notable exceptions. Further studies are required to identify barriers to implementing these recommendations to ensure all Australians with diabetes have access to best practice care to prevent amputations.

What kind of sick person would see a Foot Doctor! The Foot Disease in Inpatients Study (FDIS)

Background Many different guidelines recommend people with foot complications, or those at risk, should attend multiple health professionals for foot care each year. However, few studies have investigated the characteristics of those attending health professionals for foot care and if those characteristics match those requiring foot care as per guideline recommendations. The aim of this paper was to determine the associated characteristics of people who attended a health professional for foot care in the year prior to their hospitalisation. Methods Eligible participants were all adults admitted overnight, for any reason, into five diverse hospitals on one day; excluding maternity, mental health and cognitively impaired patients. Participants underwent a foot examination to clinically diagnose different foot complications; including wounds, infections, deformity, peripheral arterial disease and peripheral neuropathy. They were also surveyed on social determinant, medical history, self-care, foot complication history, and, past health professional attendance for foot care in the year prior to hospitalisation. Results Overall, 733 participants consented; mean(±SD) age 62(±19) years, 408 (55.8%) male, 172 (23.5%) diabetes. Two hundred and fifty-six (34.9% (95% CI) (31.6-38.4)) participants had attended a health professional for foot care; including attending podiatrists 180 (24.5%), GPs 93 (24.6%), and surgeons 36 (4.9%). In backwards stepwise multivariate analyses attending any health professional for foot care was independently associated (OR (95% CI)) with diabetes (3.0 (2.1-4.5)), arthritis (1.8 (1.3-2.6)), mobility impairment (2.0 (1.4-2.9)) and previous foot ulcer (5.4 (2.9-10.0)). Attending a podiatrist was independently associated with female gender (2.6 (1.7-3.9)), increasing years of age (1.06 (1.04-1.08), diabetes (5.0 (3.2-7.9)), arthritis (2.0 (1.3-3.0)), hypertension (1.7 (1.1-2.6) and previous foot ulcer (4.5 (2.4-8.1). While attending a GP was independently associated with having a foot ulcer (10.4 (5.6-19.2). Conclusions Promisingly these findings indicate that people with a diagnosis of diabetes and arthritis are more likely to attend health professionals for foot care. However, it also appears those with active foot complications, or significant risk factors, may not be more likely to receive the multi-disciplinary foot care recommended by guidelines. More concerted efforts are required to ensure all people with foot complications are receiving recommended foot care.

Water management capacity building to support rapidly developing mining economies

Many developing countries are experiencing rapid expansion in mining with associated water impacts. In most cases mining expansion is outpacing the building of national capacity to ensure that sustainable water management practices are implemented. Since 2011, Australia's International Mining for Development Centre (IM4DC) has funded capacity building in such countries including a program of water projects. Five projects in particular (principally covering experiences from Peru, Colombia, Ghana, Zambia, Indonesia, Philippines and Mongolia) have provided insight into water capacity building priorities and opportunities. This paper reviews the challenges faced by water stakeholders, and proposes the associated capacity needs. The paper uses the evidence derived from the IM4DC projects to develop a set of specific capacity-building recommendations. Recommendations include: the incorporation of mine water management in engineering and environmental undergraduate courses; secondments of staff to suitable partner organisations; training to allow site staff to effectively monitor water including community impacts; leadership training to support a water stewardship culture; training of officials to support implementation of catchment management approaches; and the empowerment of communities to recognise and negotiate solutions to mine-related risks. New initiatives to fund the transfer of multi-disciplinary knowledge from nations with well-developed water management practices are called for.

Insights from stimulating creative behaviours in a project-based organization team

Novel and useful ideas and creative behaviours originate in varied work environments, yet the characteristics of work environments that stimulate and foster such creative behaviours are not well defined. The aim of this study was to identify the influences that contribute to creative behaviours in the work environment of a global project-based professional service organization. This article is based on an investigation of the work environment of one project team undertaking interdisciplinary work in the construction of a processing plant in a remote location. This multi-disciplinary team encouraged creative behaviours through regular team meetings, ensuring the presentation of diverse views and commitments to regular interaction and collaboration in co-located environments. In addition, a technology manager dedicated to identifying potential opportunities for patenting and commercialization further extended the creative behaviours of the team by focusing on the best solution for each situation. The study contributes new knowledge to research regarding work environments that facilitate creative behaviours.

Particle Swarm algorithm with Fuzzy decision making for a multi-objective economic and environmental optimization of design of a thermal system

Multi-Objective optimization for designing of a benchmark cogeneration system known as CGAM cogeneration system has been performed. In optimization approach, the thermoeconomic and Environmental aspects have been considered, simultaneously. The environmental objective function has been defined and expressed in cost terms. One of the most suitable optimization techniques developed using a particular class of search algorithms known as; Multi-Objective Particle Swarm Optimization (MOPSO) algorithm has been used here. This approach has been applied to find the set of Pareto optimal solutions with respect to the aforementioned objective functions. An example of fuzzy decision-making with the aid of Bellman-Zadeh approach has been presented and a final optimal solution has been introduced.

Design methodologies and architectures of hardware-based evolutionary algorithms for aerospace optimisation applications on FPGAS

This thesis is a study of new design methods for allowing evolutionary algorithms to be more effectively utilised in aerospace optimisation applications where computation needs are high and computation platform space may be restrictive. It examines the applicability of special hardware computational platforms known as field programmable gate arrays and shows that with the right implementation methods they can offer significant benefits. This research is a step forward towards the advancement of efficient and highly automated aircraft systems for meeting compact physical constraints in aerospace platforms and providing effective performance speedups over traditional methods.

A generative design system based on evolutionary and mathematical functions

Previous work by Professor John Frazer on Evolutionary Architecture provides a basis for the development of a system evolving architectural envelopes in a generic and abstract manner. Recent research by the authors has focused on the implementation of a virtual environment for the automatic generation and exploration of complex forms and architectural envelopes based on solid modelling techniques and the integration of evolutionary algorithms, enhanced computational and mathematical models. Abstract data types are introduced for genotypes in a genetic algorithm order to develop complex models using generative and evolutionary computing techniques. Multi-objective optimisation techniques are employed for defining the fitness function in the evaluation process.