Vertical graphene gas- and bio-sensors via catalyst-free, reactive plasma reforming of natural honey

A rapid reforming of natural honey exposed to reactive low-temperature Ar + H2 plasmas produced high-quality, ultra-thin vertical graphenes, without any metal catalyst or external heating. This transformation is only possible in the plasma and fails in similar thermal processes. The process is energy-efficient, environmentally benign, and is much cheaper than common synthesis methods based on purified hydrocarbon precursors. The graphenes retain the essential minerals of natural honey, feature reactive open edges and reliable gas- and bio-sensing performance.

Reactive plasma-aided RF sputtering deposition of hydroxyapatite bio-implant coatings

The plasma-assisted RF sputtering deposition of a biocompatible, functionally graded calcium phosphate bioceramic on a Ti6A14 V orthopedic alloy is reported. The chemical composition and presence of hydroxyapatite (HA), CaTiO3, and CaO mineral phases can be effectively controlled by the process parameters. At higher DC biases, the ratio [Ca]/[P] and the amount of CaO increase, whereas the HA content decreases. Optical emission spectroscopy suggests that CaO+ is the dominant species that responds to negative DC bias and controls calcium content. Biocompatibility tests in simulated body fluid confirm a positive biomimetic response evidenced by in-growth of an apatite layer after 24 h of immersion.

Stoichiometry, crystallinity, and nano-scale surface morphology of the graded calcium phosphate-based bio-ceramic interlayer on Ti-Al-V

A plasma-assisted concurrent Rf sputtering technique for fabrication of biocompatible, functionally graded CaP-based interlayer on Ti-6Al-4V orthopedic alloy is reported. Each layer in the coating is designed to meet a specific functionality. The adherent to the metal layer features elevated content of Ti and supports excellent ceramic-metal interfacial stability. The middle layer features nanocrystalline structure and mimics natural bone apatites. The technique allows one to reproduce Ca/P ratios intrinsic to major natural calcium phosphates. Surface morphology of the outer, a few to few tens of nanometers thick, layer, has been tailored to fit the requirements for the bio-molecule/protein attachment factors. Various material and surface characterization techniques confirm that the optimal surface morphology of the outer layer is achieved for the process conditions yielding nanocrystalline structure of the middle layer. Preliminary cell culturing tests confirm the link between the tailored nano-scale surface morphology, parameters of the middle nanostructured layer, and overall biocompatibility of the coating.

Reactive species in RF plasma sputtering deposition of nanocrystalline calcium phosphate bio-active films

Optical emission of reactive plasma species during the synthesis of functionally graded calcium phosphate-based bioactive films has been investigated. The coatings have been deposited on Ti-6Al-4V orthopedic alloy by co-sputtering of hydroxyapatite (HA) and titanium targets in reactive plasmas of Ar + H2O gas mixtures. The species, responsible for the Ca-P-Ti film growth have been non-intrusively monitored in situ by a high-resolution optical emission spectroscopy (OES). It is revealed that the optical emission originating from CaO species dominates throughout the deposition process. The intensities of CaO, PO and CaPO species are strongly affected by variations of the operating pressure, applied RF power, and DC substrate bias. The optical emission intensity (OEI) of reaction species can efficiently be controlled by addition of H2O reactant.

Cultural economy planning in creative cities : discourse and practice

While a growing body of research analyses the functional mechanisms of the cultural or creative economy, there has been little attention devoted to understanding how local governments translate this work into policy. Moreover, research in this vein focuses predominately on Richard Florida's creative class thesis rather than considering the wider body of work that may influence policy. This article seeks to develop a deeper understanding of how municipalities conceptualize and plan for the cultural economy through the lens of two cities held up as model ‘creative cities’ — Austin, Texas and Toronto, Ontario. The work pays particular attention to how the cities adopt and adapt leading theories, strategies and discourses of the cultural economy. While policy documents indicate that the cities embrace the creative city model, in practice agencies tend to adapt conventional economic development strategies for cultural economy activity and appropriate the language of the creative city for multiple purposes.

The cultural economy in recession : Examining the US experience

Over the last two decades we have witnessed the global rise and spread of urban development policies aimed at stimulating the cultural economy. However, with the onset of the global financial crisis and recession, the cultural economy may experience a dramatic reorganization and even decline. Given the attention many cities place on the cultural sectors it is important to examine how they fare following this major economic event. To do so, this article examines the occupational distribution and geographic structure of the cultural economy in the 30 largest US metropolitan areas during recession and captures the changes that have occurred over the last decade. Based on this analysis, we identify a set of key trends, which highlight that while the boom period is generally characterized by widespread and, in some places, extreme growth in the cultural sectors, the recession is a period of selective growth and not a period of total decline. These findings have implications for determining the relevance of the arts and cultural sectors as targets of urban economic development policy in the post-recession era.

Art spaces in community and economic development : connections to neighborhoods, artists, and the cultural economy

There is growing interest in the arts in community and economic development, yet little research examines the dynamics of community-based arts institutions to inform urban planning and policy. Drawing on interviews with participants and organizers of small and midsized art spaces, the study explores the factors that influence their involvement in neighborhood revitalization and outreach, support for artistic communities, and efforts to build bridges to commercial cultural sectors. Art spaces function as a conduit for building social networks that contribute to both community revitalization and artistic development. But issues pertaining to the location, organization, and management of art spaces may limit their community and economic development potential. The article concludes with proposals to craft stronger arts-based community and economic development programs.

Essays in the political economy of voting and reforms

This thesis presents four essays in the political economy of elections and reforms. The first study exploits discontinuities around school entry cut-off dates to show that early childhood conditions can impact the probability to become a top-flight politician. The second study provides empirical estimates of the effect of sequential voting on turnout and bandwagon voting outside the laboratory. The third work describes a novel nonparametric strategy to identify tactical voting patterns directly from balloting results using British election data. Finally, a study is put forward that examines the political feasibility of reforms.

Educating for the creative economy in emerging countries

In 1972, the United Nations (UN) Conference on the Human Environment expressed a growing realization that economic and social progress needed to be balanced with a concern for the environment and the stewardship of natural resources. The hard-to-grasp concept of "sustainable development" was first defined as "development that meets the needs of the present without compromising the ability of future generations to meet their needs" (World Commission on Environment and Development [WESDJ, 1987, p. 43). This definition contains two concepts: first, "human needs," with priority given to the world's poor, and, second, the environment's limits for meeting the state of technological and social organization (WESD, 1987, p. 43). At the 2002 World Summit on Sustainable Development (UN, 2002a), the focus on environmental protection broadened to encompass social justice and the fight against poverty as key principles of development that is sustainable. Three interdependent and mutually reinforcing "pillars" were recognized: economic development, social development, and environmental protection. These pillars must be established at local, national, and global levels. The complexity and interrelationship of critical issues such as poverty, wasteful consumption, urban decay, population growth, gender inequality, health, conflict, and the violation of human rights are addressed in all three pillars (Pigozzi, 2003, p. 3). Following the concept of sustainable development, we argue that the challenge for developing countries in contemporary society is to meet the very real need for economic development and opportunities for income generation, while avoiding the unintended and unwanted consequences of economic development and globalization. These consequences include social exclusion, loss of cultural heritage, and environmental and ecological problems.

A Tradable Permit System in an Intertemporal Economy

It is known that in an intertemporal competitive economy, a tradable permit system may not achieve efficiency without setting appropriate permit interest rates (i.e., rewards for holding permits). To find the rates, however, we need to know in advance the path of efficient permit prices, which is difficult to obtain. This study intends to solve this problem in two ways. First, we analyze a special case in which the permit interest rates are given by a simple rule. For example, if the marginal abatement cost of pollution emission is constant, then the appropriate rate is to equal the monetary interest rate. As is the case for global warming, if the damage is caused in the future far beyond the planning period of the environmental program, the appropriate rate coincides with the marginal self-recovery of environmental stock under certain conditions. As a second approach, we propose a tradable permit system with a permit bank, as a mechanism by which the permit interest rates are generated endogenously without governmental intervention other than the issuance of permits. However, we also show that this approach raises the problem of indeterminacy of the equilibrium. © 2013 Springer Science+Business Media Dordrecht.

Introduction : Call Centres, the Networked Economy and the Value Chain

In July 2006, members of Monash University’s Australian Centre for Research in Employment and Work (ACREW) joined with colleagues from King’s College London to hold a conference focused on ‘Socially responsive, socially responsible approaches to employment and work’ (DeCieri et al., 2006). One of the five conference streams was devoted to work and employment in call centres and was organized by the lead author of this introduction (Rainnie). This special edition of the JIR includes a number of articles from that stream.

Plagiarism 2.0 : the new economy of academic dishonesty

As a writer, teacher and scholar of ‘the knowledge economy’ in the broadest sense, plagiarism fascinates me. I first encountered plagiarism in my Year 12 English class. We had been working for weeks writing poems and had submitted them to our teacher Mr How for assessment. Mr How was generally a pleasant individual who I remember as one of my favourite school teachers; however, he did not suffer fools easily. The time arrived for each of us to read our work to the class. Year 12 poetry being what it usually is, most of our efforts tended to blur into an angsty, slightly pretentious, self-important mess (similar to staff meetings in many university departments). However, one student’s poem stood out. It was emotive, insightful and economical in its use of language … and best of all, it did not suck! The poem’s author was one of the class’ biggest jocks, and not usually one to display such sensitivity, so we were all a little taken aback by what we were hearing. Stunned silence! At the poem’s conclusion, Mr How congratulated the student on such an excellent effort and produced a copy of the collected works of Emily Dickenson (if I remember correctly) from under his desk. He asked the student to turn to a page he had marked and recite the poem printed there. It was, of course, the same one the student had passed off as his. This time, there was no stunned silence: just the sound of remorseful sobs from our jock-poet-plagiarist who had been exposed in front of his classmates.

Creative occupations as knowledge practices : innovation and precarity in the creative economy

The ARC Centre of Excellence in Creative Industries and Innovation (herewith CCI) was established with two simple policy objectives. One was to assess anecdotal and boosterish claims about the growth rates of the creative industries, and hence, to measure the size of the creative industries contribution to gross domestic product (GDP). The other was to ascertain the contribution of the creative industries to employment. Preliminary research detailed in Cunningham and Higgs (2009) showed that the existing industrial classifications did not incorporate the terminology of the creative industries, nor did they disaggregate new categories of digital work such as video games. However, we discovered that occupational codes provide a much more fine-grained account of work that would enable us to disaggregate and track economic activity that corresponded to creative industries terminology. Thus was born one major centrepiece of CCI research – the tracking of national occupational codes in pursuit of measuring creative industries policy outcomes. This paper commences with some description of empirical work that investigates creative occupations; however, the real point is to suggest that this type of detailed, occupation-based empirical work has important theoretical potential that has not yet been fully expended (though see Cunningham 2013; Hearn and Bridgstock 2014; Bakhshi, Freeman and Higgs 2013; Hartley and Potts 2014).

Renewing the Sustainable Energy Curriculum – Providing Internationally Relevant Skills for a Carbon Constrained Economy : Final Report 2014

The aims of the project were to scope and develop sustainable energy curriculum frameworks for Australian higher education Institutions that meet the needs of Australian and international student graduates and employers, both now and into the near future. The focus was on student centred learning and outcomes and to support graduates with the knowledge, skills and generic attributes required to work in the rapidly expanding sustainable energy industry in Australia and globally. The outputs of the project are designed to be relevant to specialist Sustainable Engineering and Energy Studies programs, as well as conventional engineering, science and humanities and social science programs that have a sustainable energy focus or major.