A direct integration scheme for battery-supercapacitor hybrid energy storage systems with the use of grid side inverter

Battery-supercapacitor hybrid energy storage systems are becoming popular in the renewable energy sector due to their improved power and energy performances. These hybrid systems require separate dc-dc converters, or at least one dc-dc converter for the supercapacitor bank, to connect them to the dc-link of the grid interfacing inverter. These additional dc-dc converters increase power losses, complexity and cost. Therefore, possibility of their direct connection is investigated in this paper. The inverter system used in this study is formed by cascading two 3-level inverters, named as the “main inverter” and the “auxiliary inverter”, through a coupling transformer. In the test system the main inverter is connected with the rectified output of a wind generator while the auxiliary inverter is directly attached to a battery and a supercapacitor bank. The major issues with this approach are the dynamic changes in dc-link voltages and inevitable imbalances in the auxiliary inverter voltages, which results in unevenly distributed space vectors. A modified SVM technique is proposed to solve this issue. A PWM based time sharing method is proposed for power sharing between the battery and the supercapacitor. Simulation results are presented to verify the efficacy of the proposed modulation and control techniques.

Optimized switching control strategy for current-fed half-bridge converter

A switching control strategy is proposed for current-fed half-bridge converters. An active switch based voltage doubler circuit at the secondary side of the isolation transformer is used to obtain zero-current-switching at turn-off and zero-voltage-switching at turn-on in the primary side switches of the current-fed half-bridge converter. The operation of the current-fed half-bridge converter with the proposed switching control strategy is explained using the equivalent circuit during each sub-interval of operation. The operation of the current-fed halfbridge converter is simulated using MATLAB/Simpower and PSIM to verify the feasibility of the switching control strategy. Experimental results are provided to validate the converter's operation.

A motor controller using field oriented control and Hall effect rotor position sensors : simulation and implementation

A field oriented control (FOC) algorithm is simulated and implemented for use with a permanent magnet synchronous motor (PMSM). Rotor position is sensed using Hall effect switches on the stator because other hardware position sensors attached to the rotor may not be desirable or cost effective for certain applications. This places a limit on the resolution of position sensing – only a few Hall effect switches can be placed. In this simulation, three sensors are used and the position information is obtained at higher resolution by estimating it from the rotor dynamics, as shown in literature previously. This study compares the performance of the method with an incremental encoder using simulations. The FOC algorithm is implemented using Digital Motor Control (DMC) and IQ Texas Instruments libraries from a Simulink toolbox called Embedded Coder, and downloaded into a TI microcontroller (TMS320F28335) known as the Piccolo via Code Composer Studio (CCS).

A distributed computing framework for all-to-all comparison problems

Distributed computation and storage have been widely used for processing of big data sets. For many big data problems, with the size of data growing rapidly, the distribution of computing tasks and related data can affect the performance of the computing system greatly. In this paper, a distributed computing framework is presented for high performance computing of All-to-All Comparison Problems. A data distribution strategy is embedded in the framework for reduced storage space and balanced computing load. Experiments are conducted to demonstrate the effectiveness of the developed approach. They have shown that about 88% of the ideal performance capacity have be achieved in multiple machines through using the approach presented in this paper.

Application of anomaly technique in wind turbine bearing fault detection

Bearing faults are the most common cause of wind turbine failures. Unavailability and maintenance cost of wind turbines are becoming critically important, with their fast growing in electric networks. Early fault detection can reduce outage time and costs. This paper proposes Anomaly Detection (AD) machine learning algorithms for fault diagnosis of wind turbine bearings. The application of this method on a real data set was conducted and is presented in this paper. For validation and comparison purposes, a set of baseline results are produced using the popular one-class SVM methods to examine the ability of the proposed technique in detecting incipient faults.

Overvoltage and overloading prevention using coordinated PV inverters in distribution network

Overvoltage and overloading due to high utilization of PVs are the main power quality concerns for future distribution power systems. This paper proposes a distributed control coordination strategy to manage multiple PVs within a network to overcome these issues. PVs reactive power is used to deal with over-voltages and PVs active power curtailment are regulated to avoid overloading. The proposed control structure is used to share the required contribution fairly among PVs, in proportion to their ratings. This approach is examined on a practical distribution network with multiple PVs.

Coil enhancements for high efficiency wireless power transfer applications

Achieving high efficiency with improved power transfer range and misalignment tolerance is the major design challenge in realizing Wireless Power Transfer (WPT) systems for industrial applications. Resonant coils must be carefully designed to achieve highest possible system performance by fully utilizing the available space. High quality factor and enhanced electromagnetic coupling are key indices which determine the system performance. In this paper, design parameter extraction and quality factor optimization of multi layered helical coils are presented using finite element analysis (FEA) simulations. In addition, a novel Toroidal Shaped Spiral (TSS) coil is proposed to increase power transfer range and misalignment tolerance. The proposed shapes and recommendations can be used to design high efficiency WPT resonator in a limited space.

Double star chopper cell converter for battery electric vehicles with inter-module SoC balancing and fault tolerant control

A modularized battery system with Double Star Chopper Cell (DSCC) based modular multilevel converter is proposed for a battery operated electric vehicle (EV). A design concept for the modularized battery micro-packs for DSCC is described. Multidimensional pulse width modulation (MD-PWM) with integrated inter-module SoC balancing and fault tolerant control is proposed and explained. The DSCC can be operated either as an inverter to drive the EV motor or as a synchronous rectifier connected to external three phase power supply equipment for charging the battery micro-packs. The methods of operation as inverter and synchronous rectifier with integrated inter-module SoC balancing and fault tolerant control are discussed. The proposed system operation as inverter and synchronous rectifier are verified through simulations and the results are presented.

Soft-switching single inductor current-fed push-pull converter for PV applications

A switching control strategy is proposed for single inductor current-fed push-pull converter with a secondary side active voltage doubler rectifier or a voltage rectifier used in photovoltaic (PV) grid interfacing. The proposed switching control strategy helps to turn-on and turn-off the primary side power switches with zero-voltage and zero-current switching. The operation of the push-pull converter is analyzed for two modes of operation. The feasibility of the proposed switching control strategy is validated using simulation and experimental results.

Energy efficient home with price sensitive stochastically programmable TCAs

Introduction of dynamic pricing in present retail market, considerably affects customers with an increased cost of energy consumption. Therefore, customers are enforced to control their loads according to price variation. This paper proposes a new technique of Home Energy Management, which helps customers to minimize their cost of energy consumption by appropriately controlling their loads. Thermostatically Controllable Appliances (TCAs) such as air conditioner and water heater are focused in this study, as they consume more than 50% of the total household energy consumption. The control process includes stochastic dynamic programming, which incorporated uncertainties in price and demand variation. It leads to an accurate selection of appliance settings. It is followed by a real time control of selected appliances with its optimal settings. Temperature set points of TCAs are adjusted based on price droop which is a reflection of actual cost of energy consumption. Customer satisfaction is maintained within limits using constraint optimization. It is showed that considerable energy savings is achieved.

Butterfly: the dark fluidity of suburban life

The American Association of Australasian Literary Studies (AAALS) Annual Conference, Forth Worth, Texas, 9–11 April 2015. The dark fluidity of Melbourne suburbia in Sonya Hartnett’s Butterfly Sonya Hartnett’s Butterfly (2009) is a fictional account of the suburban family life of the Coyles in 1980’s outer suburban Melbourne written from the perspective of teenager Plum Coyle. The Coyle family at first glance appear to be living a textbook example of the suburban lifestyle developed from the 19th century and sustained well into the twentieth century, in which housing design and gender roles were clearly defined and “connected with a normative heterosexuality” (Johnson 2000: 94). The Australian suburban space is also well documented as a place where people often have to contend with oppressive rigid social and cultural ideals (ie Rowse 1978, Johnson 1993, Turnbull 2008, and Flew 2011). There is a tendency to group “suburb” as one monolithic space but this paper will argue that Hartnett exposes the dark fluidity and the complexity of the term, just as she reveals that despite or perhaps because of the planned nature of suburbia, the lives that people live are often just as complex.

MATLAB/Simulink simulation and C2000 code generation model for a grid-interactive 3-phase 4-wire inverter

This work is a MATLAB/Simulink model of a controller for a three-phase, four-wire, grid-interactive inverter. The model provides capacity for simulating the performance of power electroinic hardware, as well as code generation for an embedded controller. The implemented hardware topology is a three-leg bridge with a neutral connection to the centre-tap of the DC bus. An LQR-based current controller and MAF-based phase detector are implemented. The model is configured for code generation for a Texas Instruments TMS320F28335 Digital Signal Processor (DSP).

Goodbye Brigadoon: Place, Production, and Identity in Global Glasgow

Goodbye Brigadoon examines the shifting role media production plays in the economic and cultural strategies of global cities in small market nations, specifically Glasgow, Scotland. In particular, this project focuses on the formation of a digital media village along the banks of the River Clyde to argue the site constitutes a logical component to Glasgow’s ongoing transformation into a cosmopolitan center. Yet, as the regional government’s economic strategies and policy directives work to transform the abandoned waterfront into a center of cultural activity, this project also underscores the contradictory cultural dynamics to emerge from media production’s new role in the post-industrial city. At its core, the media hub reveals a regional government more interested in the technology used to deliver “national” stories than the manner of the stories themselves or the cultural practices responsible for creating them. Indeed, Goodbye Brigadoon is most interested in how media professionals based at the emergent cluster negotiate a sense of cultural identity and creative license against the institutional constraints, policy matters, and commercial logic they also must navigate in their workaday rituals. Ultimately, the conclusions offered in this project argue for a more complicated conception of the global-local location where these professionals work. Glasgow’s digital media village, in other words, is much more than an innocuous site of competitive advantage, urban regeneration, and job growth. It is best understood as a site of intense social struggle and unequal power relations where local mediamakers often find the site’s impetus for multiplatform media production an institutionally enforced false promise at odds with the realities of creative labor in the city.

Pivotal people, pivotal journeys: Interim report on the impact of a fundraising study tour on CEOs and their organisations

A longitudinal qualitative study was conducted with CEOs of 12 fundraising organisations across Australia to answer the question - how mights a change in the CEO's fundraising knowledge improve fundraising activity and outcomes for their organisation? The CEOs along with the inaugural Australian Grantmaker of the Year, Caitriona Fay from Perpetual and lead researcher Dr Wendy Scaife travelled to San Antonio, Texas, USA to attend the annual Association of Fundraising Professionals (AFP) conference in March 2014. Participants identified five main success factors for such group learning initiatives about fundraising: - Getting away from the day to day business of running the organisation - Informal, social time to debrief and get to know others - Diversity of organisations whereby no one was in direct competition to others - Commitment, openness and willingness of individuals to participate - Group facilitation This research has been supported by the Perpetual Foundation – Trustees Endowment, The Edward Corbould Charitable Trust, and the Samuel and Eileen Gluyas Charitable Trust under the management of Perpetual Trustee Company Ltd.