Comparative analysis of traffic state estimation ─ Cumulative counts-based and trajectory-based methods

The Macroscopic Fundamental Diagram (MFD) relates space-mean density and flow. Since the MFD represents the area-wide network traffic performance, studies on perimeter control strategies and network-wide traffic state estimation utilising the MFD concept have been reported. Most previous works have utilised data from fixed sensors, such as inductive loops, to estimate the MFD, which can cause biased estimation in urban networks due to queue spillovers at intersections. To overcome the limitation, recent literature reports the use of trajectory data obtained from probe vehicles. However, these studies have been conducted using simulated datasets; limited works have discussed the limitations of real datasets and their impact on the variable estimation. This study compares two methods for estimating traffic state variables of signalised arterial sections: a method based on cumulative vehicle counts (CUPRITE), and one based on vehicles’ trajectory from taxi Global Positioning System (GPS) log. The comparisons reveal some characteristics of taxi trajectory data available in Brisbane, Australia. The current trajectory data have limitations in quantity (i.e., the penetration rate), due to which the traffic state variables tend to be underestimated. Nevertheless, the trajectory-based method successfully captures the features of traffic states, which suggests that the trajectories from taxis can be a good estimator for the network-wide traffic states.

Indoor Air Quality in Naturally Ventilated Italian Classrooms

Characterization of indoor air quality in school classrooms is crucial to children’s health and performance. The present study was undertaken to characterize the indoor air quality in six naturally ventilated classrooms of three schools in Cassino (Italy). Indoor particle number, mass, black carbon, CO2 and radon concentrations, as well as outdoor particle number were measured within school hours during the winter and spring season. The study found the concentrations of indoor particle number were influenced by the concentrations in the outdoors; highest BC values were detected in classrooms during peak traffic time. The effect of different seasons’ airing mode on the indoor air quality was also detected. The ratio between indoor and outdoor particles was of 0.85 ± 0.10 in winter, under airing conditions of short opening window periods, and 1.00 ± 0.15 in spring when the windows were opened for longer periods. This was associated to a higher degree of penetration of outdoor particles due to longer period of window opening. Lower CO2 levels were found in classrooms in spring (908 ppm) than in winter (2206 ppm). Additionally, a greater reduction in radon concentrations was found in spring. In addition, high PM10 levels were found in classrooms during break time due to re-suspension of coarse particles. Keywords: classroom; Ni/Nout ratio; airing by opening windows; particle number

Australia’s first Pharmacists Immunisation Pilot – about the service

Background: The first phase of the Queensland Pharmacist Immunisation Pilot (QPIP) ran between April and August 2014, to pilot pharmacists administering influenza vaccinations for the flu season for the first time in Australia. Aim: An aim was to investigate factors facilitating implementation of a pharmacist vaccination service in the community pharmacy setting. Method: The QPIP pharmacies were divided into two arms; the South East Queensland arm consisting of 51 Terry White Chemists (TWCs), and 29 pharmacies in the North Queensland (NQ) arm. The TWCs featured pharmacies which previously provided a vaccination service and that were experienced with using an online booking system, providing an opportunity to capture booking data. Results: The TWCs delivered 9902 (90%) of the influenza vaccinations in QPIP. Of these, 48.5% of the vaccines were delivered via appointments made using the online booking system, while 13.3% were in-store bookings. Over one-third (38.2%) of the vaccinations delivered in were “walk-ins” where the vaccination was delivered ‘on the spot’ as spontaneous or opportunistic vaccinations. The absence of a booking system meant all vaccinations delivered in the NQ arm were “walk-ins”. The online-booking data showed 10:00 am and Tuesday being the most popular time and day for vaccinations. Patients preferred having their vaccinations in private consultation rooms, over areas which used a screen to partition off a private area. Discussion: The presence of an online booking system appeared to increase the efficiency and penetration of the of vaccine service delivery. Also, as the level of privacy afforded to patients increased, the number of patients vaccinated also increased. Conclusions: As pharmacist-delivered vaccination services start to progressively roll out across Australia; these findings pave the way for more efficient and effective implementation of the service.

Materials and methods for encapsulation of OPV: A review

Amongst alternative energy sources, photovoltaics hold a considerable promise for it is a plentiful, easily accessible and renewable source of power. Yet, the overall cost of generating electricity using the most advanced silicon based solar cells remains high compared to both traditional and other renewable power generation approaches. Organic thin film photovoltaics are an emerging economically competitive photovoltaic technology that combines manufacturing adaptability, low-cost processing and a lightweight, flexible device end-product. At present, however, commercial use of organic photovoltaics is hindered by low conversion efficiency and poor overall stability of the devices. Encapsulation with high barrier performance materials and structures is one of the key ways to address these issues and improve device lifetime. This paper will briefly outline the current understanding of the major degradation mechanisms, their interrelation and the internal and external factors that initiate these processes. Then, the paper will provide an overview of currently available encapsulant materials, their utility in limiting chemical (water vapor and oxygen penetration) and mechanical degradation within individual layers and device as a whole, and potential drawbacks to their application in organic photovoltaic devices.

DNP3 network scanning and reconnaissance for critical infrastructure

The Distributed Network Protocol v3.0 (DNP3) is one of the most widely used protocols to control national infrastructure. The move from point-to-point serial connections to Ethernet-based network architectures, allowing for large and complex critical infrastructure networks. However, networks and con- figurations change, thus auditing tools are needed to aid in critical infrastructure network discovery. In this paper we present a series of intrusive techniques used for reconnaissance on DNP3 critical infrastructure. Our algorithms will discover DNP3 outstation slaves along with their DNP3 addresses, their corresponding master, and class object configurations. To validate our presented DNP3 reconnaissance algorithms and demonstrate it’s practicality, we present an implementation of a software tool using a DNP3 plug-in for Scapy. Our implementation validates the utility of our DNP3 reconnaissance technique. Our presented techniques will be useful for penetration testing, vulnerability assessments and DNP3 network discovery.

Accounting for risk: The advent of capped conveyancing title insurance

Title insurance companies originating from America, have, in the past 15 years become part of the Australian conveyancing landscape. However for most residential freehold owners, their activities would be a mystery. A purchaser does not routinely obtain title insurance, with the companies presently focussing on servicing the mortgagee sector. While the lack of penetration in the residential purchaser market may be attributed to the consumer’s lack of knowledge, evidence from Ontario and New Zealand illustrates that title insurance is likely to become an additional cost in the conveyancing process in Australia. In this article we highlight the reasons why, and demonstrate how title insurers have, by working with the legal profession been able to subtly move the risk of responsibility for compensation for loss, (at least in the first instance) from the state to the insurer, but with the added benefit for the state and the conveyancing agents that the cost of the insurance is ultimately borne by the consumer. In New Zealand this development is being accelerated by the introduction of capped conveyancing title insurance. Whether title insurance will become part of the conveyancing process is no longer the relevant question for Australia, (it undoubtedly will), but the unknown issue is just how title insurance companies will work with conveyancing agents to infiltrate the market, and what response this infiltration will have in terms of the state’s view as to their continued role in the provision of assurance. We suggest that developments from New Zealand in relation to capped conveyancing insurance are likely to be replicated in Australia in the near future, and that the state’s role in providing an assurance fund will continue, though the state may seek to expand the areas in which the right to compensation is restricted.

Numerical study on the surface depression of the concrete runway pavement under impact load

Airport runway pavement always subjected to huge impact loading due to the hard landing of aircraft on the pavement surface. Therefore runway pavements should have sufficient impact resistance capability to avoid damage causing by hard impact like surface deflection in downward or penetration since the repair works is cumbersome within the operating condition of airport and also increases the service life cost of the pavement structure. Several research works have been carried out on airport runway pavement to measure the present condition of pavement and also to predict future performance of it. However, most of the works are confined by pavement response under moving aircraft loading. Nevertheless, no comprehensive research work is yet conducted to identify the controlling factors which might have significant effect in changing the common pavements damage like surface penetration depth under impact of aircraft. Therefore, a 3D FE study is conducted to determine some effective factors in controlling the top surface penetration depth of runway pavement. Among the exterior factors, mass of the impactor, velocity of the impactor, impact angle and boundary conditions are selected and as interior factors, thickness of the runway pavement, compressive strength and density of materials used in the runway pavement are selected.

Mechanical properties and damage tolerance of Y2SiO5

Y2SiO5 has potential applications as functional-structural ceramic and environmental/thermal barrier coating material. As an important grain-boundary phase in the sintered Si3N4, it also influences the mechanical and dielectric performances of the host material. In this paper, we present the mechanical properties of Y2SiO5 including elastic moduli, hardness, strength and fracture toughness, and try to understand the mechanical features from the viewpoint of crystal structure. Y2SiO5 has low shear modulus, low hardness, as well as high capacity for dispersing mechanical damage energy and for resisting crack penetration. Particularly, it can be machined by cemented carbides tools. The crystal structure characteristics of Y2SiO5 suggest the low-energy weakly bonded atomic planes crossed only by the easily breaking Y-O bonds as well as the rotatable rigid SiO4 tetrahedra are the origins of low shear deformation, good damage tolerance and good machinability of this material. TEM observations also demonstrate that the mechanical damage energy was dispersed in the form of the micro-cleavages, stacking faults and twins along these weakly bonded atomic planes, which allows the "microscale-plasticity" for Y2SiO5.