Common hazards and their mitigating measures in work zones : a qualitative study of worker perceptions

Road construction and maintenance activities present challenges for ensuring the safety of workers and the traveling public alike. Hazards in work zones are typically studied using historical crash records but the current study took a qualitative approach by interviewing 66 workers from various work zones in Queensland, Australia. This supplemented and enhanced the limited available data regarding the frequency and nature of work zone crashes in Australia, provided worker insights into contributing factors, and assessed their opinions on the likely effectiveness of current or future approaches to hazard mitigation. Workers may not be aware of objective data regarding effectiveness, but their attitudes and consequent levels of compliance can influence both the likelihood of implementation and the outcomes of safety measures. Despite the potential importance of worker perceptions, they have not been studied comprehensively to date, and thus this study fills a significant gap in the literature. Excessive vehicle speeds, driver distraction and aggression towards roadworkers, working in wet weather, at night and close to traffic stream were among the most common hazards noted by workers. The safety measures perceived to be most effective included police presence, active enforcement, and improving driver awareness and education about work zones. Worker perceptions differed according to their level of exposure to hazards.

Regulating Workplace Risks: A Comparative Study of Inspection Regimes in Times of Change

Regulating Workplace Risks is a study of regulatory inspection of occupational health and safety (OHS) and its management in five countries – Australia, Canada (Québec), France, Sweden and the UK – during a time of major change. It examines the implications of the shift from specification to process based regulation, in which attention has been increasingly directed to the means of managing OHS more systematically at a time in which a major restructuring of work has occurred in response to the globalised economy. These changes provide both the context and material for a wider discussion of the nature of regulation and regulatory inspection and their role in protecting the health, safety and well-being of workers in advanced market economies.

Integrating ‘role play’ in assessment to strengthen professional conduct and accountability of students : a pilot study

BACKGROUND In a process engineering setting, graduates are frequently allocated reviews of existing operations or required to scope new production processes by their supervisors with a view to improving or expanding on operations and overall productivity. These tasks may be carried out in teams and in consultation with the process engineer’s immediate line manager or a more experienced engineer, such as the Production or Maintenance Manager; ultimately reporting to senior management, which is frequently a non-engineer. Although professional skills development is part of engineering curricula, ‘professional conduct’ and ‘accountability’ required for dealing with peers and superiors in industry is not very well addressed at university. Consequently, upon graduation, many students are, in terms of knowledge and experience in this area, underprepared to work effectively in industry settings. PURPOSE The purpose of this study was to develop and implement a role-play scenario within a core 2nd year process engineering unit, so that students could gain knowledge, skills and experience in different aspects (and nuances) of professional conduct and accountability. DESIGN/METHOD In the role-play scenario, students worked in ‘engineering production teams’ to design a process for an iconic Queensland fruitcake and to present their solution and recommendations (culminating in a poster presentation) to an assessment panel consisting of staff, role-playing as, ‘production and plant managers’. Students were assessed on several areas, including professionalism using a criteria referenced assessment guide by a 3-member cross-disciplinary staff panel consisting of a Business Faculty lecturer, an engineer from industry and the lecturer of the Process Engineering unit. Professional conduct and accountability was gauged through direct questioning by the panel. Feedback was also sought from students on various aspects through a survey questionnaire after the role play activity at the end of semester. RESULTS Overall, the role play was very well performed with students achieving an average score of 79.3/100 (distinction grade). Professional conduct as assessed by panel was on average better than scores given for professional accountability (4.0 compared with 3.6 out of 5). Feedback from students indicated that the learning activities had contributed to their overall understanding of the content and the role of process engineers. Industry involvement was rated very highly as contributing to their learning at 4.8 (on Likert scale from 1 – 5) and the poster presentation was rated at 3.6. CONCLUSIONS This pilot study was successful in implementing a new assessment task for modelling professional conduct and accountability within a 2nd year core unit. This task incorporated a role-play activity and there was evidence to suggest that this and associated learning tasks were successful in broadening students’ understanding and skills in this area required for engineering practice. Following feedback given by students and staff, improvements will be made to the nature of the problem, how it is defined, its assessment, and the approach taken in the role-play scenario when the unit is offered in 2014.

A study of the informal interactions between audit committees and internal auditors in Australia

This paper finds evidence for the growing importance of informal interactions between the internal audit function and the audit committee (AC) in Australia – a relatively unexplored topic in the literature – using a survey of Chief Audit Executives (CAEs). It also describes the nature of these informal interactions. The most innovative elements of this paper are the findings that certain personal characteristics of CAEs, the specific knowledge and expertise of the AC chair, as well as some of the AC chair’s personal characteristics are associated with the existence (and increase) of informal interactions.

Do e-learning applications click with students globally? A study of the development and adoption of WriteCite.com

This paper traces the process of invention of adoption of WriteCite.com which is an internet based learning tool used by students to format citation lists. A number of theoretical issues relating to development and deployment of online learning tools are addressed in this paper. A significant finding in this paper is that adoption rate of new technologies amongst students, in this case for WriteCite.com, is not immediately global in nature despite the internet's ubiquity and the existence of internationally accepted bibliographic styles. Rather, and in contrast to neo theories of technology internationalisation, early-stage adoption tends to be geo-centric and concentrated in the US. In the case of WriteCite.com, which has not been sponsored by an academic institution, the findings reflect voluntary rates of globa adoption. From an applied perspective, the process of identifying globally contestable markets is relevant to developers of online learning tools.

Pollen image classification using the classifynder system: Algorithm comparison and a case study on New Zealand honey

We describe an investigation into how Massey University’s Pollen Classifynder can accelerate the understanding of pollen and its role in nature. The Classifynder is an imaging microscopy system that can locate, image and classify slide based pollen samples. Given the laboriousness of purely manual image acquisition and identification it is vital to exploit assistive technologies like the Classifynder to enable acquisition and analysis of pollen samples. It is also vital that we understand the strengths and limitations of automated systems so that they can be used (and improved) to compliment the strengths and weaknesses of human analysts to the greatest extent possible. This article reviews some of our experiences with the Classifynder system and our exploration of alternative classifier models to enhance both accuracy and interpretability. Our experiments in the pollen analysis problem domain have been based on samples from the Australian National University’s pollen reference collection (2,890 grains, 15 species) and images bundled with the Classifynder system (400 grains, 4 species). These samples have been represented using the Classifynder image feature set.We additionally work through a real world case study where we assess the ability of the system to determine the pollen make-up of samples of New Zealand honey. In addition to the Classifynder’s native neural network classifier, we have evaluated linear discriminant, support vector machine, decision tree and random forest classifiers on these data with encouraging results. Our hope is that our findings will help enhance the performance of future releases of the Classifynder and other systems for accelerating the acquisition and analysis of pollen samples.

Importance of knowledge management processes in a project-based organization : a case study of research enterprise

Knowledge Management (KM) is vital factor to successfully undertake projects. The temporary nature of projects necessitates employing useful KM practices for tackling issues such as knowledge leakiness and rework. The Project Management Office (PMO) is a unit within organizations to facilitate and oversee organizational projects. Project Management Maturity Models (PMMM) shows the development of PMOs from immature to mature levels. The existing PMMMs have focused on discussing Project Management (PM) practices, however, the management of project knowledge is yet to be addressed, at various levels of maturity. This research project was undertaken to investigate the mentioned gap for addressing KM practices at the existing PMMMs. Due to the exploratory and inductive nature of this research, qualitative methods were chosen as the research methodology. In total, three cases selected from different industries: research; mining and government organizations, to provide broad categories for research and research questions were examined using the developed framework. This paper presents the partial findings of undertaken investigation of the research organisation with the lowest level of maturity. The result shows that knowledge creation and capturing are the most important processes, while knowledge transferring and reusing are not as important as the other two processes. In addition, it was revealed that provision of “knowledge about client” and “project management knowledge” are the most important types of knowledge that are required at this level of maturity. In conclusion, the outcomes of this paper shall provide powerful guidance to PMOs at lowest level of maturity from KM point of view.

All Anglos are alike? A study of whinging Poms and bloody-minded Aussies

Cross-cultural service research is an important topic with a rich array of empirical evidence for differences in customer perceptions, attitudes and behaviours. However, the extant literature is almost exclusively focused on differences between cultures at each end of the diversity spectrum (most commonly East vs. West). Contemporary researchers have observed that existing studies fail to acknowledge the substantially greater levels of intra-cluster variation that exist. A cultural cluster is a group of countries that reflect values, attitudes and beliefs stemming from a common cultural ancestry. This seems surprising given the anecdotal evidence and stereotypes that are portrayed in popular culture, media and art. One area where intra-cluster variation may be evident is consumer complaint behaviour and in particular within the Anglo-cultural cluster in countries. A cultural cluster is a group of countries that reflect values, attitudes and beliefs stemming from a common cultural ancestry. The aim of this study is therefore to explore and elucidate the nature of differences in consumer complaint behaviour between cultures traditionally conceived and operationalised as identical. This study presents a qualitative study of 60 in-depth interviews with consumers in the United Kingdom and Australia and identifies differences in complaining styles, parental influence and the conceptualisation of complaining.

The nature of errors made by drivers [Austroads Publication no: AP-R378-11]

It is important that we understand the factors and conditions that shape driver behaviour – those conditions within the road transport system that contribute to driver error and the situations where driver non-compliance to road regulations is likely. This report presents the findings derived from a program of research investigating the nature of errors made by drivers, involving a literature review and an on-road study. The review indicates that, despite significant investigation, the role of different error types in road traffic crashes remains unclear, as does the role of the wider road transport system failures in driver error causation.

Attributing human uniqueness and human nature to cultural groups : distinct forms of subtle dehumanization

Research on subtle dehumanization has focused on the attribution of human uniqueness to groups (infrahumanization), but has not examined another sense of humanness, human nature. Additionally, research has not extended far beyond Western cultures to examine the universality of these forms of dehumanization. Hence, the attribution of both forms of humanness was examined in three cross-cultural studies. Anglo-Australian and ethnic Chinese attributed values and traits (Study 1, N = 200) and emotions (Study 2, N = 151) to Australian and Chinese groups, and rated these characteristics on human uniqueness and human nature. Both studies found evidence of complementary attributions of humanness for Australians, who denied Chinese human nature but attributed them with greater human uniqueness. Chinese denied Australians human uniqueness, but their attributions of human nature varied for traits, values, and emotions. Study 3 (N = 54) demonstrated similar forms of dehumanization using an implicit method. These results and their implications for dehumanization and prejudice suggest the need to broaden investigation and theory to encompass both forms of humanness, and examine the attribution of both lesser and greater humanness to outgroups.

Conceptual beliefs about human values and their implications: Human nature beliefs predict value importance, value trade-offs, and responses to value-laden rhetoric

Beliefs that may underlie the importance of human values were investigated in 4 studies, drawing on research that distinguishes natural-kind (natural), nominal-kind (conventional), and artifact (functional) beliefs. Values were best characterized by artifact and nominal-kind beliefs, as well as a natural-kind belief specific to the social domain, “human nature” (Studies 1 and 2). The extent to which values were considered central to human nature was associated with value importance in both Australia and Japan (Study 2), and experimentally manipulating human nature beliefs influenced value importance (Study 3). Beyond their association with importance, human nature beliefs predicted participants’ reactions to value trade-offs (Study 1) and to value-laden rhetorical statements (Study 4). Human nature beliefs therefore play a central role in the psychology of values.

Weight-related risk perception among healthy and overweight pregnant women: A cross-sectional study

Objective The objective of this study was to evaluate weight-related risk perception in early pregnancy and to compare this perception between women commencing pregnancy healthy weight and overweight. Study design Pregnant women (n=664) aged 29±5 (mean±s.d.) years were recruited from a metropolitan teaching hospital in Australia. A self-administered questionnaire was completed at around 16 weeks of gestation. Height measured at baseline and self-reported pre-pregnancy weight were used to calculate body mass index. Cross-sectional analysis was conducted. Differences between groups were assessed using chi-squared tests for categorical variables and t-tests or Mann–Whitney U tests for continuous variables depending on distribution. Result Excess gestational weight gain (GWG) during pregnancy was more important in leading to health problems for women or their child compared with pre-pregnancy weight. Personal risk perception for complications was low for all women, although overweight women had slightly higher scores than healthy-weight women (2.4±1.0 vs 2.9±1.0; P<0.001). All women perceived their risk for complications to be below that of an average pregnant woman. Conclusion Women should be informed of the risk associated with their pre-pregnancy weight (in the case of maternal overweight) and excess GWG. If efforts to raise risk awareness are to result in preventative action, this information needs to be accompanied by advice and appropriate support on how to reduce risk.

Adaptive nature of coordinated road traffic injury prevention responses in some OECD countries

This study examines the context of coordinated responses, triggers for coordinated responses, and preference for or choice of coordinating strategies in road traffic injury prevention at a local level in some OECD countries. This aim is achieved through a mixed-methodology. In this respect, 22 semi-structured interviews were conducted with road traffic injury prevention experts from five OECD countries. In addition, 31 professional road traffic injury prevention stakeholders from seven OECD nations completed a self-administered, online survey. It found that there was resource limitation and inter-dependence across actors within the context of road traffic injury prevention at a local level. Furthermore, this study unveiled the realization of resource-dependency as a trigger for coordinated responses at a local level. Moreover, the present examination has revealed two coordinating strategies favored by experts in road traffic injury prevention – i.e. self-organizing community groups, which are deemed to have a platform to deliver programs within communities, and the funding of community groups to forge partnerships. However, the present study did not appear to endorse other strategies such as the formalization of coordinated responses or a legal mandate to coordinate responses. In essence, this study appears to suggest a need to manage coordinated responses from an adaptive perspective with interactions across road traffic injury prevention programs being forged on a mutual understanding of inter-dependency arising out of resource scarcity. In fact, the role of legislation and top-down national models in local level management of coordinated responses is likely to be one of identifying opportunities to interact with self-organized community groups and fund partnership-based road traffic injury prevention events.

Difficulties in distinguishing coherent from fragmental kimberlite: A case study of the Muskox pipe (Northern Slave Province, Nunavut, Canada)

Kimberlite drill core from the Muskox pipe (Northern Slave Province, Nunavut, Canada) highlights the difficulties in distinguishing coherent from fragmental kimberlite and assessing the volcanological implications of the apparent gradational contact between the two facies. Using field log data, petrography, and several methods to quantify crystal and xenolith sizes and abundances, the pipe is divided into two main facies, dark-coloured massive kimberlite (DMK) and light-coloured fragmental kimberlite (LFK). DMK is massive and homogeneous, containing country-rock lithic clasts (~ 10%) and olivine macrocrysts (~ 15%) set in a dark, typically well crystallised, interstitial medium containing abundant microphenocrysts of olivine (~ 15%), opaques and locally monticellite, all of which are enclosed by mostly serpentine. In general, LFK is also massive and structureless, containing ~ 20% country-rock lithic clasts and ~ 12% olivine macrocrysts. These framework components are supported in a matrix of serpentinized olivine microphenocrysts (10%), microlites of clinopyroxene, and phlogopite, all of which are enclosed by serpentine. The contact between DMK and LFK facies is rarely sharp, and more commonly is gradational (from 5 cm to ~ 10 m). The contact divides the pipe roughly in half and is sub-vertical with an irregular shape, locally placing DMK facies both above and below the fragmental rocks. Most features of DMK are consistent with a fragmental origin, particularly the crystal- and xenolith-rich nature (~ 55-65%), but there are some similarities with rocks described as coherent kimberlite in the literature. We discuss possible origins of gradational contacts and consider the significance for understanding the origin of the DMK facies, with an emphasis on the complications of alteration overprinting of primary textures.

The nature of academic leadership at the colleges of the Royal University of Bhutan

This qualitative case study explored leaders' and faculty members' perspectives on the nature of academic leadership at the Royal University of Bhutan (RUB) Colleges. The study revealed that academic leadership at the Colleges is a complex and emergent fusion of Western and Buddhist leadership. The research recommended a hybrid model intended to inform academic leadership development in Bhutanese higher education and contribute to the realisation of the Gross National Happiness philosophy. The model incorporates Buddhist-influenced leadership and other relevant leadership approaches and is expected to contribute to academic rigour through effective learning and research leadership.